SX20, MX300 and Cisco C90 multisite functionality

Similar Questions

• multisite functionality: SX20 vs C40

  Hi all

  I get confused on the difference between the SX20 and C40 in terms of multisite functionality.

  Is it true that C40 can manage several participants at the same time as the SX20 with the same infrastructure (MCU)?

  And then I'm just the high definition SIP/H.323 MultiSite feature four lanes 1080 p 30 means that you can have a total 4 participants (including you) both with the quality of the 1080 p 30? If it is true then it is possible to have more participants with lower video quality?

  Thanks in advance.

  Best regards,

  IJE

  There is no difference between SX20 and C40 capabilites multisite; maximum number of participants is 1 + 3 (auto + 3 additional sites). This is so regardless of the resolution, non - you will not be able to increase the number of participants by lowering the resolution.

  /Jens

  Please evaluate responses and trademark issues "answered" as appropriate.

  Sent by Cisco Support technique Android app

• Directories of Cisco C90

  We have a medically certified application that uses the Cisco C90 via its API and Telnet. The question we have is that this specific application is referred to the local address book and not the address book of companies that is replicated through the organization. Any way to copy address books via the script or to change a setting in the C90, so it is the references to the address book when the local address book is requested via the API?

  All advice is appreciated and we would be potentially interested in any contractor who can help with this.

  You will need to modify the application so that it looks the right directory via the API commands it uses.  There is not sort on the endpoint to indicate endpoint to search for the API to redirect to the local directory in the directory of companies.

  Thus, in the application, where he is doing a

   xCommand Phonebook Search

  you will need to set it to a

   xCommand Phonebook Search PhonebookType: Corporate

  Take a look at the API reference Guide for details (Page 121).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• difference between CTS-INTP-C90-K9 and CTS-C90-K9

  Hello

  What is the difference between CTS-INTP-C90-K9 and CTS-C90-K9?

  Kind regards

  Peter.

  Hi Peter,.

  The partnumber CTS-C90-K9 is basically the codec C90, it only includes:

  C90 Unit Codec

  Remote control TRC 5

  C90 CODEC license key

  Presenter products natural package (APM) for the C series

  Rack mounting kit

  HDMI cables and power

  The CTS-INTP-C90-K9 partnumber is a complete bundle, including almost all of the required components. See the following document:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/installation_guide/78-19773-02_Codec_C90-C60-C40_Integrator_Package_for_web.PDF

  Note This touch device isn't on the list, because it is optional, but it can be included in the same package for the partnumber CTS-INTP-C90-K9.

  I hope this helps.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Polycom and Cisco interoperability

  Hi all

  I have a Cisco MX300 and a Polycom VC device in my network. I want that these devices are able to communicate with each other, that is to say I want to do video conferencing between these devices.

  Is VCS required in order to allow videoconferencing between these devices, or they can communicate directly over IP to IP in my network?

  Please suggest

  Thank you

  Your question would be more place in the section of telepresence to the forums where these devices are most actively discussed in the section other topics of Collaboration you have posted in.  You can move your discussion by editing your message and change the categories at the bottom.

  You don't specify what type of Polycom system you have, but if it can support the H323 composition, then both devices can dial each other directly via IP without needing a VCS.

• NIC teaming + with leaves HP VirtualConnect and Cisco load balancing

  Hello

  I configure ESX infrastructure running on the blades HP (c7000 enclosure), VirtualConnect and Cisco 3750 switches for the uplink. My network configuration is based on the HP VirtualConnnect Cookbook, scenario 11.

  On the ESX Server, I configured a vSwitch with two NICs grouped. Each card can see a different network of VirtualConnect. Each VC network has active SmartLink.

  Each network of VirtualConnect is associated with two ports on a Bay of VC. These two ports are the uplinks in Cisco 3750 switches. Cisco switches are configured in a pile, and each port associated with the VC network is configured with LACP.

  Here are the facts:

  -Each network (Host A and host B) is properly configured for the LACP Protocol, in other words, the links are shown as active/active in the VC Manager.

  -Communication of ESX is good.

  -Failover and failback function OK.

  The problem: I can't get the load balancer to work. All virtual machines use a single bear. I tried different algorithms on the server ESX (source port ID, mac, IP hash hash) and the configuration of the equivalent from Cisco.

  I have attached a diagram of the physical network, but also the setting to ports.

  What Miss me? Thank you very much

  Pablo

  Because you want to create technically not a channel in an ESX perspective, you do want to use the hash of the IP.  If ESX attempts to send traffic through the two network cards, the cisco switch should drop this package as part of its loop avoidance algorithms.  You should be able to check that out in the switch port statistics.  You should not use the switch port ID.

  Not sure about the promiscuous mode.  Who do not have any account, as far as load balancing is concerned, unless the portgroup was not properly inherit the vSwitch properties?

  -KjB

  VMware vExpert

• When I run firefox it takes about 30 seconds and it prevents the functioning of my mcafee? It started after I updated to version 10!

  When I run firefox it takes about 30 seconds and it prevents the functioning of my mcafee? its has started after I updated to version 10!

  Hello

  You can try to update the add-on of McAfee. The latest version is reported to be less problematic. See also this.

• What the handles, threads, and processes means or function, they are performing?

  My son will ask me a question and I could not answer (it is perhaps a good thing because I think he will try to enter and change something he doesn't know) so I thought that I felt I'd better try to find out. He and I are eager to know what the handles, son and process average or functions, they do. They are in the performance tab in Windows Task Manager.

  
  
  Thank you

  Hello

  A process handle is an integer value that identifies a Windows process. The Win32 API call a HANDFUL.

  When you start a program, this program runs as a "process". It's something that runs in its own protected area, with its own memory. Other processes cannot touch this memory.

  A few times, the program needs to do several things at once in a way of multitasking, similar to how the multitasking process. For example, a spreadsheet can recalculate the cells you enter data. He * could * start another process, but they can't (easily) share the memory, he would need to if recalculate cells!

  Must be a different sort of process that is not quite as separated. It is a "thread".

  Process: the number of applications that are running at some point in the computer.

  Hope this information helps.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• I installed a sniper art called win game it shows yellow field and gives Pure virtual function error

  I installed a sniper art called win game it shows yellow field and gives Pure virtual function error.

  Hello

  · What is the full error message that you receive with error code if any?

  I suggest you to refer to the manual of game for more information contact the Publisher of the game for support. There may be a specific game update that solves this problem because it seems to be linked to a C++ runtime error in the game.

• HP Touch Smart calendar and Notes cease to function and give me a notification so I end the program but it gives me immediately the notification even happening?

  HP Touch Smart calendar and Notes cease to function and give me a notification so I end the program but it gives me immediately the notification even happening?

  the notification said that the problem caused blocking the program works correctly.
  Windows will close the program and notify you if a solution is
  available.
  [Exit]
  I closed the program and this notification will appear back again.

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I would be grateful if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3 are you aware of any changes made to the computer before the show?

  I would say you runa full scan using the Microsoft Safety Scanner and look for any infections.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  If the problem persists, you can start the computer in safe mode and perform a clean boot. Clean boot helps eliminate any conflict of third party software.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• LACP hash between N3048 and CISCO SG300/SG200 + question Twinax attach direct cable

  Hello

  In my network I have deployed two new N3048 with 2 transceivers SPF + and SPF module back + as core switches are connected to other 3 switches from edge of N2048 using optical fiber and I reused my previous CISCO SG300 and SG200 goes to serve the other two boxes of my campus via the spine in copper.

  I have 4 copper cable which starts from the hub of the SG300 network and 2 the SG200 brass. I set up to have a redundant connection using 2 + 2 with SG300 and 1 + 1 with SG200 RSTP.

  So for the SG300 I re LAG + LACP to have two channels of the N3048s port, but now that a single cable is connected because I don't know what kind of LACP hash mode should I put on N3048 to have a compatible hash between Dell and Cisco switches.

  My N3048 have mode 7 (Advanced hash) as default but I guess that cisco models do not understand... so, what mode is the best for LACP work perfectly with small business cisco switches?

  I also received my twinax cables to connect my two N3048 via SPF + back modules... conhot can I plug the cables into the slots SPF + (already mounted) without turning off my basic switches?

  Thank you!

  See you soon

  Cables can be connected/disconnected, but I don't know if the real module SFP + for the rear of the N3000 is hot plug.

• Unable to connect to network WPA2 with Windows 7 64-bit (Intel 4965 and Cisco WUSB600N)

  Connect to a WPA2 network seems to be a fairly common problem.  Again, I can't be able to find a solution.

  OS: Windows 7 Ultimate 64-bit

  Wireless adapter (s): Intel 4965AGN (integrated into Dell XPSM1330) and Cisco/Linksys WUSB600N

  Drivers: latest windows 7 64 bit drivers from the two websites of companies.  Intel (v12.4.1.4), Linksys (3.0.10.0)

  Network properties: WPA2 enterprise, encryption of the ACS, authentication EAP - P, several types of routers around the world

  History: has been able to use the same laptop with Vista32 on this network without any problem

  I can not connect to networks non - WPA WPA networks simply not.

  When you try to connect to my companies WPA2 network (at any of our locations around the world).

  Method #1:

  1. Select "Other network" in the list of network
  2. Enter the SSID of the network
  3. Windows could not connect to the SSID
  Method #2
  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID, as WPA2-Enterprise security type, type of encryption like AES, check the boxes to connect automatically and connect even if the network is not broadcasting
  6. An unexpected error has occurred

  Method #3: Try to trick windows

  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID but select an open network
  6. Adds the network
  7. Then try to change properties
  8. WPA2-Enterprise security type
  9. Set to AES encryption type
  10. "Choose a network authentication method:" drop-down menu is empty!
  11. Windows has encountered an error saving the wireless profile.  Specific error: the profile has an invalid length field.

  I'm pretty desperate for a solution.

  Kind regards

  John

  There are a few people with Win7 x 64 that cannot connect to WPA2 P/EAP Corporate/business networks and no solution?

  Come on, guys, it's the microsoft answers site! someone give me something! I have two asus laptops, both with network cards Intel having this problem on two networks separate enterprise (school).

  Edit:

  RESOLVED:

  Here's the thread of the resolution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-company-wireless-network/3bcd12b1-A0D8-4357-bded-07da96259920?page=3

  The problem occurs when you perform a Wizard for easy transfer to a computer that was Symantec Endpoint Protection installed to one without him.

  Answer, copypasted:

  Inspect the key mentioned above - that is of HKLM\System\CurrentControlSet\services\RasMan\PPP\EAP.

  In each of the number keys look something like ConfigPathBackup and its corresponding ConfigPath - there are a number of them.

  For each, I deleted the original key (e.g., ConfigPath) and restored the original by renaming ConfigPathBackup to ConfigPath

  For each of them, the State is now restored to her pre State Symantec - each key pointed to a Symantec location that is no longer present and by restoring the path key backs up everything was fine

• This version of Cisco Adaptive Security Appliance Software Version 9.6 (1) 5 is affected by Cisco Adaptive Security Appliance SNMP Remote Code execution vulnerability and Cisco Adaptive Security Appliance CLI Remote Code execution vulnerability of

  This version of Cisco Adaptive Security Appliance Software Version 9.6 (1) 5 is affected by Cisco Adaptive Security Appliance SNMP Remote Code execution vulnerability and Cisco Adaptive Security Appliance CLI Remote Code execution vulnerability of

  Hi vrian_colaba,

  You can take a look at cisco's Advisory here:

  https://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CI...

  Fixed versions

  Cisco ASA Major Release	First version fixed
  7.2	Affected; migrate to 9.1.7(9) or later
  8.0	Affected; migrate to 9.1.7(9) or later
  8.1	Affected; migrate to 9.1.7(9) or later
  8.2	Affected; migrate to 9.1.7(9) or later
  8.3	Affected; migrate to 9.1.7(9) or later
  8.4	Affected; migrate to 9.1.7(9) or later
  8.5	Affected; migrate to 9.1.7(9) or later
  8.6	Affected; migrate to 9.1.7(9) or later
  8.7	Affected; migrate to 9.1.7(9) or later
  9.0	9.0.4 (40)
  9.1	9.1.7(9)
  9.2	9.2.4 (14)
  9.3	9.3.3 (10)
  9.4	9.4.3(8) ETA 26/08/2016
  9.5	9.5 (3) ETA 30/08/2016
  9.6 (DFT)	9.6.1 (11) / 6.0.1(2) FTD
  9.6 (ASA)	9.6.2

  5 9.6 (1) is not part of the fixed versions, this means that is assigned for the SNMP Remote Code execution vulnerability.

  Cisco Adaptive Security Appliance CLI Remote Code vulnerability to run you can also take a look at cisco's Advisory here:

  https://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CI...

  Fixed versions

  The following table shows the first software versions that include fixes for this vulnerability (9.6 is not affected)

  Cisco ASA Major Release	First version fixed
  7.2	Affected, migrate to 8.4 (3) or later
  8.0	Affected, migrate to 8.4 (3) or later
  8.1	Affected, migrate to 8.4 (3) or later
  8.2	Affected, migrate to 8.4 (3) or later
  8.3	Affected, migrate to 8.4 (3) or later
  8.4	8.4 (3)
  8.5	Affected, migrate to 9.0 (1) or later version
  8.6	Affected, migrate to 9.0 (1) or later version
  8.7	Affected, migrate to 9.0 (1) or later version
  9.0	9.0 (1)
  9.1	Not affected
  9.2	Not affected
  9.3	Not affected
  9.4	Not affected
  9.5	Not affected
  9.6	Not affected

  Hope this info helps!

  Note If you help!

  -JP-

• HP J4853A and Cisco SFP Module 100BASE-FX

  Hi all!

  HP J4853A and Cisco SFP Module modules 100BASE-FX is not compatible?

  Thank you!

  Both are 100Base FX for at layer 1, they are interoperable.

  Higher tier features will not be handled on one platform or another.