SX20 with Smart Board

Similar Questions

• Using SMART board with Vista

  I was told that the problem I have with my SMART board is a Vista problem.  When I try to use the Board and edit pages, move pages with scrolling and bar other I have to go back and use my lap top.  Also when I'm doing these things a "shadow" of a mouse appears.  I used the Board on my old lap top with xp and had no problems.  Any ideas?

  I work as a partisan TI on a campus of the school in Switzerland. We also use Vista in one of our schools, and they also have smartboards. We do not have this problem, so I would say that this is not the problem of vista. I think Smarttech really not support Vista, perhaps that they are still working with xp (like many others) and think: vista sucks, we don't really support it... but that's just my opinion, I never asked them.
  The only problems we have at the moment are: Circle flashing at the level of the mouse cursor (the sandclock :)) alternative when a smartboard is connected... it's because Vista has its own Tablet PC features and smartboard deliver its own tablet pc features and these other two bug.) On Windows 7 this problem disappeared, thankfully... and then the school to win7 soon!
  We received a delivery of smartboards in the last week (school holidays) and install. Now, we got some PC how to have a cursor of mouse jerks, you can not work on this pc, its slow reeeeeaaaally... the matrix bullet time - is going to be lightning fast compared to this :)

  Last Thursday, I found the solution: remove it ' Smarttech virtual Tablet PC ' (or almost similar name, you know, when you see :)) driver in device management, restart and the problems disappeared.

  We do not have the problem describe you with smartboard and vista... and we had a lot of smartboards with vista pc (I think about 50). We have the real updates and SP2 of vista installed, but we had no problems on the Vista SP1...

  The problem with your shadow-mouse: http://www2.smarttech.com/kbdoc/124970

  SmartBoard tools etc aren't on the Microsoft Compatibility Center, but in our schools work, although there are a few bugs. I think it has something to do with your installation... some other 3rd party software that occurs the problem or not the current version of smartboard tools and software (but we also do not have this problems with older versions of the software driver or laptop smart product).

  I hope I could help a bit.

  Best regards
  Stephan

• Watch an interactive pdf - page break at the touch on the screen - SMART board problem?

  Is there a way to disable the page advance when you touch the screen in the visualization of interactive PDF files?

  Adobe Acrobat Pro X c. 10.1.3

  Reading and full screen, I have the url and the navigation links that work very well.

  But when I 'touch' the screen out of one of these live areas with my cursor, the page goes to the next.

  I could avoid this but I'm worried about my customers who will use it on a SMART board.

  I foresee it as a problem when displaying on a SMART board (I don't have access to one) where the teacher is pointing to something on the page, and he lurched suddenly to another, or when you use the SMART display writing tool, it can jump.

  Anyone?

  Thanks for your thoughts.

  Nothing you can do in the PDF itself, but on the dialog box Preferences for Acrobat/Reader, full-screen you need to disable «left click to go forward one page...» "option.

• photo iOS 10 face recognition does not not with smart battery from apple on the iPhone case 6

  Hello

  After upgrading my iPhone 6 with smart box Apple iOS 10, I tried the new feature recognition of person of photo enforcement.

  He asked me to connect the phone to the power outlet and lock the screen. I connected my case smart battery with the iPhone in to the charger and waited at least 10 minutes. IPhone person kept asking me to connect to the socket and lock screen battery icon showing that the phone is charging and the case of the battery to 100%.

  As I withdrew my iPhone from the record, plugged directly into the outlet and locked to the screen, picture began to go in my photos.

  Anyone else with the same problem?

  If there is a bug where should I report it?

  Kind regards

  Xavier

  It is a Bug, but I think that if you have agreed to share your Apple device status information, they already know the problem

• Can I change T510 customer Flexible with Smart zero OS to use thin Pro?

  Hello world

  I have a small batch of T510 Flexible with zero operating system Smart customers on them, I would like to know if it is possible to Flash the BONE thin Pro on these devices or not. We were given these devices by a partner organization, we work with, unfortunately the intercept devices with Smart zero rather than thin Pro.

  Thank you
  Chris

  Download the following from the following link

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5226832 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_125701_1%257CswEnvOID%253D4030%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Please follow the instructions below to create the bootable USB media.
  Step 1: Insert the USB key into any desktop or laptop computer (to create the bootable USB support)
  Step 1: Download the file in any location in the computer.
  Step 2: right-click on the downloaded file and select "run as Administrator" to run this file instead of simply double-click this file.
  Step 3: executing the file you can see a box with 4 options, please select format USB these options (ensure that a USB key is connected to the computer)
  Step 4: Once the bootable USB support is created successfully, the name of the USB media will change to "thin State".
  Step 4: Remove the USB drive and start the client using this USB key and follow the instructions.

  ====================================================

  Although I am an employee of HP, I speak for myself and not for HP. ===

  * Click on the star of CONGRATULATIONS on the left say "thank you."

• When I try to send emails in hotmail contacts list will not fall and I can't send emails. said also microsoft online service is temporarily unavailable, but been like this for a week now something to do with smart screen filter

  on hotmail, when I lorsque je tente tries to send pop emails down contacts will not come and I can't send emails do not know if this has anything to do with smart screen filter, as was temporarily unavailable for a few days now

  Hello Cawn_59,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Hotmail and would be better suited to Windows Live help community. Please visit the link below to find a community that will provide the support you want.
  Contacts - address book Windows Live Help

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP Pavilion Elite e9120y PC with mother board M2N78 - LA.

  I have a HP Pavilion Elite e9120y PC with mother board M2N78 - LA.  When it is turned on, it goes to the initial power of HP on screen (ESC, F10, F11 & F9) and stays there. The only time where could I get F10. He showed no boot device.  What is a motherboard completely dead?  Is there a similar replacement that will not affect installed licensed software?

  PhilmoIBM,

  There are several revisions of the Council M2n78 - LA. (like LasVegasWireMan) would testify. What is happening is the NVidia chip controller fails. You said "the only time I could get F10. She showed no boot device. "   That really explains it. Your motherboard is bad.

  I worked to create the list, but it never gets done.

  This series of motherboard has been installed in many different models of HP computers. There are problems.

  http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-t-see/m-p/181716#M13661 if you read through the pages 30 + you find mention of your unit.

  Here are the models reported with the guidance of M2N78LA failed. This is not the complete list.

  a4316f, e9140f, p5210y, p6130y, p6142p, p6157c, p6210y, p6214c, p6310y, p6320y, a6720y, m8530f, m9120y, m9350f, m9517c, m9530f, m9840sc

• Extending the SX20 with 12 x zoom camera

  Good day to all

  Can someone provide me with the pin code on necessary to extend the 12 x zoom camera control (cable network) when it connects to a SX20 with the explosion of cable

  • SX20
  • Extension cable
  • 12 x zoom camera
  • Right HDMI cable (10 m)

  Thank you!

  It's a cable right but with pins 3 & 6 step.  It would be nice if just Cree literature it in plain language, in addition to you give pinout diagrams.

• SX20 with third party camera

  Hi team,

  Can we connect Cisco SX20 with 3rd party camera?

  Since the SX20 12 X comes with a HDMI + power & control cable.

  Only requirement is for the video. Third party camera has a HDMI output.

  Camera controls & Device Control will be by Crestron.

  Someone Pls help on this...

  Thanks & best regards,

  Bharath

   
   
   

  As long as it is a supported resolution, it should work. Personally, I used my camcorder as an EX90 entry and it worked fine.

• SX20 with dual - can output duplicate / clone

  Hello

  I have a SX20 with dual display running s/w version TC7.3.3.

  Two monitors are connected and I put the configuration as below

  Setup > video > monitors = double

  I get the far - end and discovered on the first monitor and the second will be content presentation

  On change

  Setup > video > monitors = Single

  I get everything - Far end, near end and the presentation on the same screen

  and then the changes below

  Setup > video > SelfviewDefault modepleinecran > on

  Setup > video > SelfviewDefault OnMonitorRole > second

  Setup > video > output > HDMI 1 > MonitorRole = 1

  Setup > video > output > HDMI 2 > MonitorRole = 1

  But the situation is still the same

  Please help me to find a solution, I need to clone screens.

  Concerning

  Boily

  Well, I think I understand what you want now.

  If the monitors are the unique value you will see end, selfview and presentation all shared on the same screen.  However, if the monitors are set to dual, you see end on a screen with selfview and presentation on another.  There is now way to just see the far - end on both screens without possibility of selfview or presentation, screen share or taking a whole screen for itself, if one is active.

• I would like to know, if the first 14 elements still work with Smart Sound? Thanks for a response!

  Hello, I love to give the music to my videos with Smart Sound Sonicfire. It works perfect in first 11 elements. So before buying 14 items first, I would like to know, if this still works with Smart Sound.

  Sorry for my bad English!

  First 14 elements has no interface directly with SmartSound, like older versions of the program. The program now includes Scores, that is Adobe tool for the creation of custom music titles.

  However, if you copy a piece of music for SonicFire as a WAV, you will be able to import that WAV in your Premiere Elements project.

• How to connect with another Board?

  How to connect with another Board?
  I want to create several web page, and I want that with a link on online.
  Edge also stage as flash?

  Use iframes, like this:

  SYM. $("espace réservé") .append ("');

  The src = would be the link to the project dashboard.

• Resize the layer with smart filter without affecting the Smart Filter layer appearance

  I made a wax seals on photoshop with lots of embossing, bevelment and a dynamic filter. It's done and I just need to make it smaller so it fits well on my certificate. When I resize (Ctr + T) it appears a messgae which reads:

  ______________________________________________

  Adobe Photoshop CS6 extended

  "The dynamic filters applied to the layers contained in this group will be disabled at the temprarily while conversion is in preview. They will be applied after commit the transformation. »

  Ok

  [] Do not show

  ______________________________________________

  I click OK and I resize the layer with free transform, and then press ENTER. The layer is resized, but my smart filter that cretaes affect a shower around the joint is completely distorted.

  How to resize my layer with smart filter without affecting the appearance of dynamic filter of the layer

  Right-click on the name of the layer to smart object in the layers panel to get the menu below. Choose "Convert to Smart Object" to encapsulate the er and its smart filter and Layer Styles within a new KIND that can be resized without appearance changes.

  

• Problem with smart connector

  Hi all

  I use my iPad Pro for a while now with the smart connector. Today, however, I noticed that the Smart keyboard did not respond to my entry and I kept getting the error message "This accessory is not supported by this device."

  When took a glance t the smart connector on my iPad I noticed some discoloration, almost as if it was burned. Can someone please help me understand how or why this might have happened? He never fell into the water or something else besides.

  Ill put a picture below. Thanks in advance.

  

  Hello. When electrical contacts carry the current, they may collect certain chemicals from the atmosphere. This does not mean that your air is bad, it happens everywhere. Try to clean the contacts gently. Be sure to check each on the keyboard too.

• Problem with Smart TV 32l4333dg

  Hello! I have a problem with my Toshiba Smart TV. I have a Lenovo Z50-70 with Windows 10 laptop. And I want to connect to my laptop to TV through Miracast screen. And the problem is, when you connect through Miracast, the TV's display: connected. Please wait or something like that, and then my laptop screen and a television screen became black. Is there a solution for this problem?

  have you checked the settings of your screen in Windows?