SX2210T-touch screen with two monitors feature

Solution found by the user ES128 for touch dual monitor.
I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

Screen touch troubleshooting.
* Disconnect the 2nd monitor of the PC. Restart the PC so that it only displays one monitor in Device Manager. Depending on your operating system, do the following: -.
SX2210T Driver (Windows 7 only)
SX2210T-Touch Application
SX2210T-Touch Cam
SX2210T facial recognition Application (no not necessary, only if you want)
* Test the touch screen on the single monitor feature.

I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

I have the 2220 sort of setting before the 2210 so it seems I have a gigantic version of the laptop Acer Iconia with two screens.

Tags: Dell Peripherals

Similar Questions

  • Lightroom and color management with two monitor profiles

    I have a problem with Lightroom CC on a computer with two monitors. The images on the calibrated Eizo different in Lightroom and Photoshop. I tried many things, but it comes down to the fact that Photoshop uses correctly the different profiels ICC for two screens, but Lightroom doesn't have. That is a known issue and there will be an update to solve?

    It's on a Macintosh computer.

    Lightroom has problems with Version 4 monitor ICC profiles. Make sure that your calibration than SW preferences are set to create ICC Version 2 profiles.

  • full screen mode two monitors, 1 VM, possible?

    Is it possible to have my a Windows 7 VM mode full screen on two monitors?

    VMWare Fusion 6 - OS X Mavericks

    Hello

    Open VMware Fusion > in the menu bar, click View > click on "use all displays in mode full-screen.

    Now when you put a virtual machine in full-screen, it must use both screens.

  • Double screen with two VGA monitors (model Inspiron 620)

    Hello

    I have an Inspiron (processor i5-2320 @3 GHz) 620 office. The graphics card is AMD Radeon HD 6450.

    With two displays analog VGA, I wanted to dual monitor.

    My problem is that the Office does not recognize the two vga monitors but that one monitor. Vga ports (I have two) on the desktop do not work at the same time.

    So, I tried to use the DVI port, but it is only allowed to use DVI - D (I thought I'd use two monitors if allowed the graphics card DVI connector VGA). DVI - D deosn seem to allow analog monitors.

    Currently, I only use one of the two with an analog monitor vga ports.

    I wonder if I should buy the new digital monitor that can be connected to the DVI - D port.

    Or is there a method to use both on the desktop vga ports?

    riofunk7,

    You have two options...

    (1) connect both monitors to the ports added discrete video card
    (2) connect a monitor to the integrated VGA port. Connect the other monitor to the additional port of discrete video card
    * Reboot the system
    * Press F2
    * Navigate to Advanced-Graphics Configuration
    * Activate Intel several monitor function
    * Press F10 to save your changes and exit the bios

  • How can I activate the touch screen with remote desktop

    I have an Asus ep121 windows 7 home tablet Office remotely to a desktop windows 7 Professional.

    Remote Desktop is not recognized any touch gesture. Windows 7 has a touchscreen native, is backing anyway to force the remote computer to accept the touch input of the Tablet?

    Hello

    Windows 7 has a native touch screen probably support in that. Affect the gesture is unfortunately not possible on desktop connection remotely.

    When a remote desktop session is established between two computers (one with the ability to touch and others with no possibility of touch) as in your case. It may not be a chance to access a computer able to touch with your desktop capable of non-contact, although Windows 7 is touch wiz compatible.

    In order to use the touch features or programs, both computers must be installed with equipment able to touch. For example a touch screen, Touch pad, etc.

    Without compatible hardware on both computers by touch, touch capable desktop connection between two computers remotely maybe isn't possible.

    The only way to create an able to touch Remote Desktop connection is by installing equipment to touch interface on your desktop.

    Provide us additional information. So that we can help solve you the problem on your computer.

    Hope this information helps you.

  • Work with two monitors in Premiere Pro.

    Hello

    I'm new in the use of first Pro CC. I would like to know how you set the workspace in first to two screens. In Final Cut Pro X, there is a button where you can set the workspace to work with two screens. Where is this feature in the first? I've not found in "Workspace" or "Preferences". Please, if anyone with a tip, I'm a happy man.

    Kind regards

    Bo

    See if they help you:

    Two monitors

    Dual display

  • Satellite A200 - black screen with two beeps

    Date: October 17, 2009

    I have Toshiba Satellite laptop computer * model A200 PSAFCA-01400J *. I am facing a problem of * completely black screen * (I can't see any image either). It happened twice more than the screen wouldn't turn on by moving the mouse or the touchpad. To turn on the screen I had to restart the computer. The screen worked well until it turns off again. Since it does not turn on even after I restarted my computer several times. I noticed that my * Windows vista home premium * load properly I can hear audio that indicates that I am ready to open a session. I also noticed the sound signal after slipping my finger on the sensor attesting that I connected successfully, but the screen remains black.

    When I turn on my computer, I noticed that it sounds two beeps, first beep is short and the second beep is relatively long. I tested the cover closing the cover switch and noticed that my computer goes into sleep mode and by opening the cover that Eve turns off and my computer turns on again; but the screen remains black. One of my friends suggested that the backlight of the screen inverter or the lid switch is defective. Can someone tell me what could be the problem and what do the two beep codes?

    Thank you

    Hi mate,

    Normally the beep codes at the start of average that it s something wrong with the hardware of your laptop. As Akuma said, maybe the graphics card or RAM must be replaced or other parts too.

    Have you already tried to connect an external monitor? You can see a picture on this subject?
    I don't know but maybe what he s m only internal something wrong with the monitor.

    In any case, I think you should contact a service provider for help. Technicians can check the laptop and fix it for you.

    Welcome them

  • AMD Radeon HD7470 with two monitors

    Hello

    I have an Optiplex 7010 with an AMD Radeon HD7470 card with 2 connected screens: a 23 "monitor connected to the HDMI port with HDMI/DVI adapter, and a 17" monitor connected to the DVI port with DVI/VGA adapter. Despite the 'strange' way to connect monitors, the image is sent to two of them. Problem is I managed only to have the image duplicated on both screens (with a single resolution, which makes the strange image on the 23 "), but I needed to extend the image, since 2 applications must be run at the same time but on different screens, so I can watch both at the same time. Also, when I go to display controls on the PC, a single monitor is recognized. Is it possible to have PC recognizing both screens and to be extended, so I can put different resolutions on each monitor and have applications open on each screen?

    Hi Luigi1967,

    Driver AMD Radeon HD7470 must be installed in order to have the multi-screen work display correctly. Are the drivers of your computer up to date? If this isn't the case, please download and update the drivers from here if your computer is Windows 7, Windows 8 download the drivers from here. To know exactly how to update the drivers to watch this video.

    I hope this helps.

  • Some subtle problems with two monitors on Windows 7

    I used two monitors with your Windows 7 Desktop for quite awhile and I just had to replace a.  This is a problem which is probably easy to fix, but I don't know how to do it.

    I figured out which monitor, I wanted to just in front of the keyboard (the larger one) and that I wanted on my right.  The new is more.  They both work very well, but there are two problems:

    1. the office and the taskbar are in the older monitor to the right - I do not know how to move.

    2. the mouse is confused.  He considers that the monitors are in the reverse position.  In other words, when the mouse is moved on the screen to the right, I have to move it OFF THE RIGHT EDGE OF the SCREEN to enter the screen on the left.  I know that I can get used to this, but I'd rather not have to.

    Thanks in advance.

    DK

    Right-click on an empty space on the desktop and choose "Screen Resolution."

    (or Panel of-> screen-> the resolution).

    Above under 'Change the appearance of your screens', you should see two icons of the screen display.  Simply slide one on the right to the left of the icon on the left (so that they switch positions). Then press "OK" your way out.

    To select the screen that contains the task bar, select the icon for this monitor in the same screen as above and a small box should appear below the "Multiple displays" line that says 'Make this my primary monitor '.  Just check this box and OK your way out.

    HTH,

    JW

  • can I use a touch screen with photoshop CS6 and Windows 7

    I need to define specific image areas to make a binary image of the organelles in an electron microscope of a cell. It would be much easier by using a pen as a mouse. Can I fix a touch screen to my computer monitor and use Windows 7 and Photoshop CS6?

    Hello George,.

    If I myself remember well touch sensitivity was introduced with Windows 8 and improved in point 8.1, so I doubt if a touchscreen monitor would work. You could easily use a graphics tablet, but enjoy the extra convenience of drawing on a screen with a science-based application.

    Hope that helps

    Terri

    PS you have a name very famous Professor George Porter was an English Nobel Prize chemist a few years ago - I had the chance to go to one of his at the Royal Institution Christmas lectures, a very clever man.

  • Wacom does not not with two monitors. MacOS 10.10.4

    I hope someone can help me with this problem of Photoshop CC. I use two monitors, the left one for my tool palettes, plugins, layers, etc. and the right to display the image I am train in full screen. After the upgrade to OS 10.10.4 I now a toolbar at the top of two window (this may have been the case before, but I've never had any problems until 10.10). When I work on an image the toolbar at the top of the right screen activates and controls the keyboard and Wacom buttons do not work unless I click on the other monitor (left). Needless to say that it's a pain in the thigh. Is that what I'm stuck with or can it be turned off?

    BTW, I have a Mac Pro desktop computer.

    It does sound at least somewhat as the landmark white window behavior fixed, but I thought that this was not a common problem with the latest OS updates.  I'd be inclined to try if

    Menus, shortcuts, Lasso tool or Photoshop constantly run when using a Wacom tablet. Mac OS

  • Preview full-screen with a monitor

    Hello

    I use first Pro CS5 on Mac with a single monitor. I would like to see the full preview screen on this monitor, hiding all the graphic interface elements.

    While reading around, I couldn't find the suggestion to choose the pane viewing and press the ~ or ' key. Unfortunately, it seems that this shortcut does not enlarge or return to the original size orders. Graphical UI elements stay on screen.

    Is there a preference to select a place?

    Thank you, Paolo

    This is as close as you can get with the first; It does not have a single-monitor full screen how FCP done.

    Make a feature request if this is something you would like to see: Adobe feature request/Bug Report Form

  • How to not to let Firefox HTML5 mode full-screen with multiple monitors or a window manager tiles

    Hello

    I'm using Firefox (v24.4.0 ESR) mode to fullscreen HTML5 with two screens or a tiling window manager. The problem is, every time the browser window loses focus, Firefox let full screen.

    It seems that it was possible to address this problem by setting the ' fullscreen - api .exit-on-disable ' in ' subject: config', but only up to what Firefox version 21.0 [1]. The option is gone, and even he created manually does not work.

    The web search gave no way to achieve this in a recent version of Firefox. Does anyone know how to get Firefox to stay full screen mode when you leave the accent?

    http://cat-in-136.blogspot.com/2013/06/diff-between-Firefox-220-Beta-3-default.html [1]

    See:

    • bug 724554 - out full screen when we focus on different display window
  • Pavilion 13-a200nx: replacement of touch screen with no touch: HP Pavilion 13-a200nx

    Hello

    Just a small question, we have an hp touch laptop model # 13 - a200nx Pavilion series and is broke.

    I wanted to know can I replace his touch with no touch screen? y at - it all the availability?

    Thank you

    Hi@Aalokit,

    HP welcomeSupport Forums. Best platform for all kinds of solutions, tips and settings for your questions/problems.

    For the best experience on HP forum, see our Guide to HP Forums to learn more.

    Need information about touch screen not touch conversion. Is this fair?

    Thank you for sharing the details of the problem. I want to help you.

    As per the technical specifications, HP does not recommend doing this upgrade / downgrade parts or software.

    Even then, if you want to do, it will be almost the cost of the computer itself. Not feasible.

    It will be in your sole discretion to do so.

    I hope this helps. Let me know to learn more.

    Happy announcement.

    Resolv_S

    Happy to help you. I work for HP

    Please click on " ""Accept as Solution " " " if you feel my post solved your problem, it will help others find the solution.
    Click on the " Bravo Thumbs Up" " " to say 'Thank you' to help! "

  • MacPro with new El Capitan update does not start with two monitors

    Does anyone have a fix for this? I updated last night and now it seems to start both monitors in wide screen mode. I have to unplug a monitor and do a hard reboot to see my login screen. Any help would be appreciated.

    new MacPro (end of 2013), Yosemite 10.11.2 3.5 ssd flash 6-core

    Thank you

    -

    What follows?

    have you tired by ensuring that everyone is on a different port TB.

    For what to ports are on which bus see:

    Use multiple screens with your Mac Pro (end 2013) - Apple Support

Maybe you are looking for