synaptic mouse pads, pointer goes crazy

Similar Questions

• PS2 Mouse goes crazy on T8000

  Hello
  When I trie to use an optical mouse to Trust with my T8000, this mouse goes crazy. Mouse 'internal' in the keyboard continues to work perfectly... but it's who wants to use it?
  Ideas anyone?

  Hello

  It is not easy to explain why this happened. In my opinion, you should try with a different external mouse. Also try disabling the internal mouse while using an external.

  Also check the BIOS settings. There is an option called pointing device or something like that. Try to change the automatic selection at the same time.

• HP 5button placed comfort wired mouse. the mouse pointer goes to the bottom of the screen itself.

  Hi all, I recently lost control of my mouse. The pointer goes to the bottom of the screen and I'm unable to click precisely on

  buttons, etc. I've uninstalled and reinstalled without success. My system is Win 7-64 bit. I said that it is a driver problem. If so, how should I do? Incidentally, the mouse works perfectly on my Vista laptop and my XP desktop if the

  the mouse is not at fault. Any help is welcome.  RegT

  Hello again RegT,

  It is good to hear from you again!

  Since your HP mouse works on two other laptops, I recommend you contact Dell technical support for assistance with device recognition and USB ports on the desktop.

  I hiope this helps!

  Best regards

• The best mouse pad fabric of sidewinder x 8?

  My sidewinder x 8 tends to jump on my black fabric xtrac ripper. is there a specific fabric mouse pad that works best with the 8 x or mouse hate cloth?

  Hello

  I would like to know a good point too,

  I'm so frustrated with the feet is not sliding on a decent surface. I tried every color feet and there is certainly a difference, the mouse works under par on a lot of surfaces, the worst of any mouse I've ever owned. Pretend that it works (decently) on all surfaces is just crazy.

  Let me be clear, the sensor of the mouse takes and works very well, you just can't move (drag) the mouse reasonably on these surfaces (perhaps due to the "foot" configuration?)

  THE FIX

  I had all sorts of things around the House to see what was the best surface. Hey presto, the magical surface for this cushion is, you guessed it, plastic clean and smooth, I use a thindisposable plastic Board my wife bought at Aldi (in a package). The mouse works brilliantly on it.

  Among the surfaces that were terrible, we, (Incidentally, even my old microsoft intellimouse mouse works fine on all these)

  fabric mouse pad (cheap generic freebee)

  glass

  Vinyl office

  Office wood

  sofa

  I would however really buy a mouse is appropriate, so if someone could answer post from gonintendos that has a good point for this mouse , they are happy with it please don't.

  Also, having said the above, the mouse is great now I have the correct surface (10/10 better than my old logitec G7 that says something)

  See you soon

  Mac

• pavillion g6 laptop mouse pad

  Hello

  My son has had a brand new, one for Christmas and all was going well until he started today and the mouse pad is totally insensitive. Can anyone help?

  @lisabling,

  Try the following.

  Shut down the laptop. Tap here to f8 start you toward the top access to the Windows Recovery Console.  Use the arrow keys to select "Safe Mode with network" and press ENTER.  Let windows fully load in this mode and see if the Touchpad works in this mode.

  If this is the case, download the latest installer Synaptics driver on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54040.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  Once done, restart the computer and Windows restarts normally - check the Touchpad still works.

  If this is the case, open your downloads folder, right-click on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• The mouse pads, the Satellite Pro C660, do weird things

  Hi guys, I have a Satellite C660 Pro who has developed a weird problem

  When the laptop has been for some time, the mouse pad will start scrolling and horizontal scrolling when I do not want to control the cursor of the mouse almost impossible until I restart, then it works very well for anywhere between 20 minutes and a few hours before it goes nuts new

  I tried to update the drivers, I also tried to disable the ability of mouse pad to scroll or do anything other than to be a mouse pad, but this does not seem to have changed anything

  any ideas out there?

  Have you also tried updating the BIOS?

• Satellite C660 - constant click of mouse pad

  Hello

  The mouse pad on one of our laptops C660 is almost like the mouse pad is constantly exploited.
  If you place the cursor on an icon, it will open this file several times.
  If I turn it off and plug in a key USB mouse stops the issue.

  I tried:
  malware research
  deactivation/reactivation
  Uninstall/install
  system restore
  Update driver

  Nothing helps.
  I don't know if it of related or not, but I do not no network connectivity.
  SE connects with happiness wireless, but that's where it ends...

  all of the tips!

  Hello

  I think that its touchpad associated setting.
  Go to control panel-> mouse control-> last (Advanced) tab-> advanced setting button

  Here you can see the area: period of time after the last key is hit. Try to solve this long

  In addition in the pointer speed and tapping settings click on setting button.
  Here I recommend that you change the level of tactile sensitivity to LOW

  Last but not lease you can also turn off the tapping. In this case, you can use the left touchpad button click in the icons...

• HP Envy 17 Notebook PC TS: Mouse Pad question

  I have a HP Envy TS 17 laptop that had problems of pad mouse for awhile.  The mouse pointer will be to randomly jump up to a point on the screen and click on the update jumps out to what I currently work with.  It makes it really hard to use and work with laptop.  I tried to play with the drivers and settings of mouse pad, but nothing works.

  I tried to start a conversation with HP support, but get this message: "this product is is more served by HP." You can search for possible solutions on this Web site. ".   I don't know what that means, because the laptop is still under warranty.  Y at - it an email address where I can contact HP support on this issue?

  @markcloutier121

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display personal information (serial numbers and information).
  
  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.
  Thank you for visiting the Forum from HP Support.

• expand the sreeen of the smallest mouse pad

  I used to pinch the mouse pad to make the screen bigger or smaller, but no anyone know why?

  Hello

  Check the following points.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.  Option, you must enable "Pinch Zoom" - see image below.

  

  Kind regards

  DP - K

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My mouse pad is totally more sensitive - he responds simply 'Watch '.

  Is it possible to adjust the sensitiviness of this mouse pad?

  Click on the "Start" button in the lower left corner of the screen.

  Click on "Control Panel."

  Click on "mouse".

  Click the "pointer options" tab

• Parameters for the turning off the mouse pad

  I have a Pavilion laptop dv7 (P/N VZ500PA #ABG) running Windows 7 and I want to use a mouse with it. I'm not entirely sure what the thing is in front of the keyboard is called (the one used when you do not have a mouse), but I want to know how to change the settings on my computer so that when I turn off the mouse pad thing, it REMAINS off the next time I turn on my computer. I know that it is possible to change the settings to do this, because it allows to do this before you change a lot of settings. It's really annoying that I have to press the button whenever I connect to Windows (if I did, then I find myself accidentally pressing the button as I type and accidentally he then clicks on things).

  If anyone can help me I would be very grateful. Thanks in advance.

  I contacted HP support by phone, and even if my laptop is out of warranty, they helped me!

  To make the icon Synaptics Pointing Device appears in the system tray, follow these steps:

  > Click Start type in the mouse Menu

  > Select "mouse".

  > Select device settings - Select static icon.

  > Select apply.

  > click OK.

  To make default the touchpad disabled, follow old_geekster instructions to do a right click on the Synaptics pointing device icon and then uncheck "tap to click on.

• How can I activate the scroll function on my laptop mouse pad?

  Hello

  My laptop mouse pad is no longer scroll in FireFox or MS Word (or any other program I've tried) since switching from Vista to Windows 7. In the Windows Help section, it suggests that there should be a tab "Scrolling" in the mouse properties window, however, when I opened the window just 4 tabs are "Buttons," "Pointers," "Pointer Options" and "hardware". How can I switch on / activate the scrolling feature?

  Thank you

  John Cordukes Colleen

  Have you installed win7 drivers for your model laptop, laptop manufacturers website? I guess that your laptop modela win7 drivers available?

• Mouse pad does not work

  A few months ago my mousepad stopped working for no. (obviously there must be one) reason. I noticed it after that I started to share music with other computers on our network. At first, I thought that the red light was something to do with it, then I discovered that the little symbol underneath was a mouse pad.

  My laptop no button on it that turn the pad on and apart, and properties of the Synaptics said that it works well and is connected to the right channel.

  Hello

  Check with support of their documentaton online and drivers, system manufacturer and ask in their forum
  (if there is one) that several will have keyboard shortcuts that will turn the Touchpad on or off.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.