Sync does not work and the application does not start

Similar Questions

• YouCam is not working error the application failed to start because its side-by-side configuration is incorrect.

  It worked initially, but now it does not work

  now every time I try to go on the youcam, a box appers and said

  "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. »

  I need help to solve this problem

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest that you run the SFC scan and check if this solves the problem for you:

  http://support.Microsoft.com/kb/929833

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Method 2: Perform a disk check, follow the steps below:

  1. open the computer by clicking the Start button, click computer.

  2. click on the drive you want to check, and then click Properties.

  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Method 3: Update of the .net Framework.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22

  Method 4: You can also try the steps from the link that addresses a similar issue:

  http://Forum.CyberLink.com/forum/posts/list/10017.page;JSESSIONID=90C05F693894B118A564C99DA1172301#44062

  Check the Event Viewer for related the question paper.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  can't connect to my home internet income james ashley forgot it the link password does not work and the password I was given does not fit into the password box

  Are you sure that you do not have to register on this site through the usual way and what you should be used elsewhere on the site?

  Have you tried to contact them to help this topic or to check if they have a FAQ on this subject?

  I found this in another thread that you created [*]:

  I'm not sure do I bought a home income internet james ashley program and I copied the login info I was given and the password does not fit into the window of password and I forgot the link password does not work I sent emails, but do not receive an answer im don't know what to do is anyway you can help me to recover my info or help me change the password?

  I assume that you have downloaded and installed this program and need to use this password in this program or only you can use these data to download the program from the site james ashley?

• Satellite 200-170-keyboard does not work and the keyboard stops working

  My U200-170 2.5 years, I have the following problem:

  When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.

  Thank you

  AJAN

  Sounds like keyboard problem.
  The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
  But one thing is really strange; the yellow exclamation mark in Device Manager

  Eventually it s only a problem of software in such a case, a system restore can be useful...

  Have you checked if the keyboard works in the BIOS?
  Do this!

  If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.

• My touchpad does not work and the usb mouse works

  After connecting with a USB key, my touchpad does not work and the USB mouse works

  Hi, Dieudonné,

  Make and model of computer?

  Have you tried to uninstall the drivers for the touchpad.  Update?

• I pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  Wow!

  So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.

  Follow the procedure below:

  • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
  • Make sure that there is no entry of Adobe on the inside.
  • Then copy and paste the Hosts file in folder etc.
  • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
  • When you are prompted, the authentication by password Mac,
  • Be sure to select the option Replace ...
  • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
  • In the affirmative. launch creative cloud application and load the list of Apps and check.

• I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the erro

  I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the error remains. I tried uninstalled and installed the application and the error remains. I use Windows 8.

  Manually delete the cache of the preview of your user folder.

  Mylenium

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Taskbar does not start error "the application failed to start because its side-by-side configuration is incorrect."

  Original title: WINDOWS 8 - ask suddenly won't open at all.

  I have installed on my VAIO, MediaGo and I use it quite frequently, but last week, he refused to open, display the error:

  "The application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe for more details. »

  I have, since the application stopped working, used guest to detect and remove the corrupted my computer files using the sfc/scannow command and the dism / /restorehealth/cleanup-image online, but the problem persists.

  I tried to watch the event log AND gave the sxstrace.exe tool a shot, but it is useless, I have no idea what to do. I googled nothing helps...

  I would really like to get the matter sorted quickly, and any help would be welcome!

  Hi Sandra,.

  You can download the latest version of Visual C++ from the following link:

  http://support.Microsoft.com/kb/2019667/en-us

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

  Please let us know the status of this issue.

• Double TIS, a VPN works, and the other routes not

  I have an ASA5505 and having everything-Connect configuration so that I can use my iPhone or iPad and get my internal IP of Cisco VC240 cameras as well as other devices on my network, but they are the main reason that I have configure the VPN.  It works like a champ and I don't have to change the settings of the iPhone/iPad app when I'm in the office or outside the office.

  I've added since an additional service provider because of certain other services on my network.  I use the ASA track feature to follow the road to an access provider and if it fails, the other ISP resumes the connection.  I copied the orders for the 1st access provider, changed the names to the second ISP and placed orders in the SAA.  I can now connect through any connection or another ISP on the iPhone/iPad.  If I connect to my ISP later, I am connected but the ASA does not traffic to me.  My stats on the iPhone shows data sent, but no receipt.  I can not ping any device, to access my camera, etc.  But when I connect to another ISP, it works fine.

  I didn't know if that's even possible with the ASA but assumed that it would be like most everything works, so it seems miss me probably a small order and it would work on either.

  Anyone know if this is possible?  And if so, any idea what could cause one to work and the other does not work?

  Hello Todd,

  What about this entry:

  NAT (inside, evertek) static local-network local-network destination source static Anyconnect client Anyconnect client

  Running from sh I see that he is not exempt from nat.

  Best regards

  Eugene

• I tried to use my photoshop cs program after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it summer more then 30 days so that program do

  I tried to use my Photoshop CS after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it was more long then 30 days if the program will not even start righteous outputs photoshop so I can't use the Help menu - I went to the adobe Web site and logged into my account and it lists my Photoshop CS as. activated in 2011 - which I guess is when I activated it - does - what I do?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• I am facing a problem when working in the Muse... The problem is that I can't remove my package page, when I try to delete it showing an error and the application terminates. I'm working on an emergency project which, I have to present tomorrow I hope y

  I am facing a problem when working in the Muse... The problem is that I can't remove my package page, when I try to delete it showing an error and the application terminates. I'm working on an emergency project which, I have to present tomorrow I hope you find a solution for the same. Help with the help of Adobe Muse CC

  Liston Hi,

  Steps to follow:

  1. Try to make a new complete site structure in MUSE and try to add a few pages and tries to remove it, just to check its not having not problem
  2. If the problem persists even, check if your site is stored on the external hard drive. Note: site should be registered on internal hard drives.
  3. Try to revive the MUSE, if the problem remains the same, we will refresh the preferences of MUSE.

  Hope it will work.

  Thank you

  Prabhakar Kumar

• "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image.

  At the start this morning, I received the message following "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image. Is there a simple solution to this problem? If it is ok, the unit freezes then

  Hello

  1. you remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  I would recommend that you run a full scan using theMicrosoft Safety Scanner and check if the problem is related to malicious software.

  Note: You may lose data while eliminating malware.

  Step 2:

  Test the issue in a clean bootand verify if the issue.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Make SFC scan and check if the problem persists.

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.