Sync media of Smartphones from blackBerry Pearl 8100 and Vista Home Premium

Similar Questions

• where can I get a winows vista home basic startup disk? And can I use a back up from another pc which is vista Home premium?

  be necessary to restart the laptop with Vista Home Basic, but do not have a backup, can make a backup of my desktop vista Home premium if it will work?

  Hello

  You cannot use a backup from a Home Premium computer to reinstall Vista Basic on another computer.

  There are several methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Change language from Spanish to English on Vista Home Premium

  Title: can original I change the language from Spanish to English on visat home premium

  can I change language from Spanish to English on visat home premium

  laptop bought in Spain with vista home premium installed, how can I change the language I tried to change in the control panel?

  Hello

  None

  You cannot change languages in Vista Home Premium

  you need Ultimate or enterprise to do so

• says my version of windows media technologies is not compatible with my windows vista home premium how to fix this

  my windows media technologies is blocked that run said is not compatible with my vista home premium how to fix

  Hello

  I will need some additional information to help you best.

  ؠ exactly when you get this message?

  ؠ What is the exact error message you get?

  Could ؠ you explain your problem in detail?

  In the meantime, you can follow the instructions that might help you resolve the issue.

  Analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  1. At prompt command, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Downgrade from Windows 7 to Windows Vista Home Premium... help please!

  Hello. I'm helping a friend fix his computer. He had someone to download a pirated version of Windows 7 and I am trying to downgrade it to its old Windows Vista. I followed all the instructions on this page http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/downgrade-from-windows-7-to-vista/e95a2e68-34b1-487e-aa56-3dadfea59a8b?tm=1357534800060 to restore the boot sector. When I type in c: D:\boot\bootsect/nt60 everything happens is subsystem needed to support the type of image is not taken in charge. I didn't know how to undo the changes that I had done so far, so I just restarted the computer and hope for the best. Now it is loading Windows Vista Home Premium but I'm unable to open a session the user account... "The service user profile Service has no logon. Message unable to load the user profile "and I'm unable to open a session. Please help me!

  Download a Windows Vista image and use the instructions in the article Create a. ISO file and then burn it to a blank DVD:

  Windows Vista SP1:

  • Windows Vista. UPlay ISO image file

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  --------------------------

  Boot from the Windows Vista DVD

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows Vista click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Smartphones from blackBerry Curve 9360 and USB connectivity in the form of media card

  I was wondering if anyone knew the answer to this question.

  When I first connect my BB for my laptop, I am presented with the possibility of using the media card on the phone as a USB device.

  If I refuse this and leave the phone connected via USB, it is possible to use the storage media card later without having to disconnect and reconnect the device to get the command prompt?

  Thanks for your comments.

  Hello and welcome to the community!

  Sorry, no... Once you refuse, which remains in force for the duration of the session. So a new session needs to be generated, which requires the Quick disconnect/reconnect the USB cable.

  Good luck!

• Problem of Smartphones from blackBerry connect to wifi at home

  I have a tomy home wifi connection problem. my blackberry bold 9700 is to find my router a netgear WNDR 3300, which is defined as WPA2 security key. When Itry to connect via WiFi protected Setup with both the PIN generated by the blackberry bold 9700 and push-button put in place. The two underlying methods a falied to you connect to message.  I have wifi checked in the box of connection management.

  What I am doing wrong?

  Steve

  I would advise against using WEP as its garbage and can be cracked very quickly.  I am currently using WPA - PSK which more secure than WEP but not as safe as WPA2.

  Try instead to use WPA.  My Bold 9700 has no problem of connection at all.

  The best solution if YOU use WEP is that if your router can handle multiple SSID, this way you can connect your PC to use WPA2 and Blackberry using WEP.

• Live365 program plays more stations in Windows Media Center (the two MCE 2005 on XP and Vista Home Premium version).

  When you select any Live365 station, just have a beep. Three different computers with the same problem (XP and Vista). However, all 3 have IE8 with the same default security settings. I also contacted Live365 support for the resolution and waiting for their response. Live365 is working on other media, just not Windows Media Center PC or extender readers.

  Thought I'd share some good news, instead of a few problems.

  A month ago, Live 365 in Windows Media Center started working again on all my computers (Vista and XP). Don't know if it's a windows update, or an update of the app live365. But whatever the fix was, thank YOU!

• Smartphones from blackBerry Pearl 9100 keeps restarting over and over again

  Hello

  Less than a few months ago, I had a new Pearl 9100. Two days ago I had to remove the battery and after I put the battery back on, the phone started to reset itself. It is the red light on the top right the start screen of Blackberry with white line where you can guess how much of the OS has loaded (percentage bar?)

  It loads about 1 to 2% of the bar and then it resets. I tried to reload the OS according to the scheme instructions on this site, but it is not possible, since the phone is not long enough for the upgrade.

  Any help will be greatly appreciated.

  Kind regards

  J

  Have you tried these steps to recharge your device software?

  1. check that the Desktop Manager and BlackBerry Device Software are installed on the computer.
  2 remove the battery from the BlackBerry. Do not re - insert.
  3. connect the BlackBerry to the computer.
  4. in the main screen of BlackBerry Desktop Manager, click on Application Loader.
  5. click on start.
  6. click on Options to select the applications to install.
  7. click on next.
  8. click Next.
  9. click on finish.
  10. when the load of the application starts, reinsert the battery into the BlackBerry.

  Thank you

• Smartphones from blackBerry Pearl 8120 - Fax field is missing

  Hello

  I noticed that when I create a new address book entry there is no fax field. I sync with outlook and the advanced field mapping shows a mapping on the fax machine, but it does not show on the 8120. Someone had the same problem?

  Thank you

  Update...

  I saved my 8120 database and then wiped down to the BONE. I then reinstalled the operating system and that solved the problem. The address book application that came from the factory could have been a little older. Thank you

• Problems syncing of Smartphones from blackBerry with 8330 and MS Outlook 2003

  I deleted my category of personal contacts in MS outlook. When I sync my outlook 8330 wants to delete my personal entries in my blackberry contacts. I've used legacy replace outlook in the Panel of conflicts, but I get the same message. I'm afraid to accept the chages because I don't want to lose my blackberry contacts. I use 4.5.0.77 software and version 4.7 of office.

  Thanks for your help. Your solution worked great!

• Camera problems of Smartphones from blackBerry after 8100 Firmware update to v4.5

  Hi all

  It is a known issue for me that I'm updating all the handsets of our work with the Blackberry firmware for the company that I work.

  After updating the firmware on multiple handsets to the latest version of the Blackberry 8100 4.5, there is a problem with the camera.

  When you are in display mode and the outside (even if covered) the screen turns white as if the lens opening is open wide.

  Even when you take the picture, the result is white all over.

  Please see examples here:

  http://www.imagedump.com/index.cgi?pick=get&TP=540100

  and

  http://www.imagedump.com/index.cgi?pick=get&TP=540101

  Two of these photos were taken inside with just on fluorescent lights.

  However if I return to the firmware to a lower level the problem no longer exists.

  I tried to change the settings for the White Balance on the handset and no matter what setting I put it on the same results occure.

  I was wondering if there is a patch or I have to wait the next release for a bug fix?

  Thank you for your help in advance.

  Gadget

  Updated the 4.5.0.55 combined software and the camera problem no longer exists.

  Can I get some laurels to solve the problem myself? Laughing out loud

  Gadget

• Media of Smartphones from blackBerry moved and changed files?

  Hello

  I am fairly new to my Bold 9790. I noticed that applications in the media of the section had disappeared. I then found several applications in the section ALL having an exclamation mark. When I open these, each was a media application and functional abnormality. All these applications were also available and identical in the multimedia application within ALL.

  Can someone explain how this happened and how to fix it?

  Thank you

  Please click on accept as a solution to help others who ask the same question.

  Thank you
  Ron

• Catastorphe Smartphones from blackBerry Desktop Manager and "BOLD"

  I just downloaded the new Blackberry Desktop Manager Mac and synced my "BOLD", then I was stupid enough to upgrade the software on the "BOLD". It was 4.6.0.126... after a while the Office Manager gave me a message that it was unable to complete the upgrade. The "BOLD" ended with a whitescreen, a list of the applications and the 4.0.0.245 BlackBerryPlatform at the top of any time I try to select one from the list, I get a variety of error 'uncaught exception' message etc. When I try to reload the old OS, "BOLD" does not connect (even though my MAC initially recognises there is a plugged USB cable.)

  Bright ideas? up until now, I liked my "BOLD"...

  Exactly the same thing with the new Archbishop Desktop for Mac and a BB "BOLD".

  See

  http://forums.CrackBerry.com/F83/reload-software-507-BB-bold-94113/

  for a way to restore the OS BB (but you need a Windows PC to do that).

  Good luck.

• Smartphones from blackBerry Storm 2 and pace Verizon's Social

  I did a reset after updating Poynt and an icon to beat Social appeared under the application. Apparently, Verizon pushed this app on my device. After clicking on the app, it opens the browser and gives me a 404 error message. After going to they're website where they confirm that the software works on a storm2 I clicked download which took me to the verizon media page that then said that the program is not available for my device the storm2. I don't see a way to remove this app anyone know how?

  Hi and welcome to the Forums!

  From what you described, there is no application installed to remove. The WHAT VZW pushes icon is a shortcut to the app DL/install, which seems to be missing in your case. Carriers push these teaser icons all the time and, as far as I can tell, are completely under the terms of their contract to do. Therefore, it has nothing to do on these icons teaser. I keep a folder on my home screen to the icons 'junk' of the things that I don't want to see.

  Best!