sync the camera with outputs daq

Similar Questions

• In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

  In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

  Hello

  You can check the link, download the manual to link Total perform operations.
  http://www.centralillinoissecurity.com/resources/documents/TC1.PDF
  You can also check out the Apple support link and view the query.
  http://www.Apple.com/support/QuickTime/

• citing the camera with the settings?

  Hello world.

  Is it possible to invoke the camera with specific parameters, on or off? As if I want to call the device by an active grid (assuming it wasn't before). Is this possible?

  Thank you, dev.

  No, which is not supported.  All parameters for the call of the camera are listed here: opening the camera map

• citing the camera with the parameter?

  Hello

  I want to take a picture with a specific resolution like 640 x 480, so it is possible to control the camera with a program?

  Are there ways to pass arguments as arguments of the camera at the request of invoke. can I specify the file name as argument so that it can be saved automatically.

  Suggestions in this regard will be helpful.

  The only way I found was citing without arguments like that

  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());

  You can use ARG_CAMERA_APP or ARG_VIDEO_RECORDER to create a new instance of CameraArguments for the camera app or application of VCR.

  Press the button Bravo thank the user who has helped you.

  If your problem has been resolved then please mark the thread as "accepted Solution".

• Impossible to move the camera with the touchpad in the games while moving in Windows 8?

  I've seen this happen on two Toshiba laptops now, I can't move the camera with the touchpad in games like TF2 while I also move with WASD keys. The problem disappears when I use an external mouse, even if, I was wondering if anyone else has this problem, and if someone has solved. I disabled the Edge slides in the Synaptics Control Panel if it helps.

  Thank you in advance! :)
  Edit 15/5: I did more research, and it seems that there is a feature called "PalmCheck. I am yet to confirm because I'm away from home, but I will as soon as POSSIBLE.

  Solved! The feature was PalmCheck Synaptics Control Panel.

  To fix:
  1. look for 'mouse', click on settings, then 'Mouse' with the mouse icon.
  2. click on device Options.
  3. click on settings.
  4 expand the category of "pointing".
  5. click on PalmCheck, then the small icon of gable beside him.
  6 move the cursor to a Minimum or offshore.
  7. apply, OK, and you're done!

• How can I create a profile of the camera with camera raw?

  Hello

  How can I create a profile of the camera with camera raw without x-rite or any other third party software?

  I have a color checker, with a different shade of colors gray and different

  I remember on a script or something like that

  I have a lot of google, but without luck

  can I create my camera raw profile using a corrector of color with photoshop acr?

  I don't know, but this should be the script http://Simon.Tindemans.EU/tools/AcrCalibrator , non ?

  but I don't know how to use it

  Is there a tutorial? Perhaps a video to create a profile with camera raw

  Thank you

  Greetings

  Hello, I think you are looking https://www.adobe.com/cfusion/entitlement/index.cfm?e=labs%5Fdngprofileeditor

  Here is a PDF from adobe on this subject: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/photoshop/pdfs/cs6/ DNGProfile_EditorDocumentation.pdf

  And an article: http://www.luminous-landscape.com/reviews/accessories/dng-profiles.shtml

• Detect dirt on a picture of the camera with Vision Assistant

  Hello

  I want to test a camerachip cleanliness.

  I tried to make a detector of dirt for a camera with Vision Assistant 2011 SP1 image.

  I modified the cell analysis of the Solution Wizard.

  My Vision Script is not able to detect any dirt pirate on the camera Image.

  Maybe you tips to optimize my other scrip alternative.

  You can use "Equalize IMAQ" (could be found in the service Table of the Vision Assistant research) right after you open the image to spread the histogramm on any bit depth.

  Christian

• Change the attributes of the camera with a .ini file

  Hello.

  I would change some attributes of camera through an INI file, before you run the User Interface.

  The problem is that when I view the values of the modified attributes, they are not changed: it's always the same values as in the case of camera NIMAX.

  In fact, I've logged IMAQdx with IMAQdxOpenCamera, then I loaded the Camera.ini value for the attributes of the camera, and finally, I closed the session with IMAQdxCloseCamera.

  I can't wait to see your ideas!

  Thomas1330

  Hello

  in fact, I solved the problem.

  I used the following function: IMAQdxReadAttribute (session id, ini_pathname)--> only the attributes in the .ini are changed in the file of the camera until I close my program

  Thomas1330

• I can not turn on the camera with windows 8 installed?

  When I go to turn on the camera for Skype, a message appears that there is a problem with the camera.

  When I go to turn on the camera for Skype, a message appears that there is a problem with the camera.

  Put its stupid but yes here it goes. Click Fn + f6 to access the settings - > click on settings in the camera-> in where you will be able to unlock your camera. Once you do this, you should be able to use your webcam

• How to follow the camera with a quick movement (photographed close)

  the shot is close green screen and a fast movement and camera cut markers.

  any ideas how to solve this problem? I knew I may had to shoot again, but its impossible because the actors are not here anymore. If I have to fix it.

  No matter what plugin recommend or technique?

  This photo will not follow with any software that I know.

  

  There are a host of problems that should give you a valuable lesson. First of all, track automatically to set unique geometry that is big enough to get at least 100 pixels of detail of. This means at least 10 X 10 pixels. There is nothing in the background of your ball in any image, with the exception of a few markers that come close to bing big enough to ensure the monitoring of follow-up. As the follow up to the camera, you will need to establish at least 2 planes that are far enough to calculate changes in perspective and parallax. Your photo does contain yet one of the elements required to keep track of the camera.

  The only plans in your shooting are net in the background and the ned in the objective. Blur of movement and wrinkles in these two plans you provide nothing to track. You also zoom out of frame 7 frame 12. NEVER EVER ZOOM if you intend to replace a background or a camera do follow. Above all, do NOT autofocus. It is almost impossible for camera tracking software to calculate a zoom of the camera when the zoom blur. A glance quick pan and zoom is almost impossible to keep in the best of cases.

  It will also be impossible to fire a clean key because the net in the background is subject to a lot of black lines and white NET in the goal gets completely blurred out in a large part of the shooting.

  Just a bit of pre-production planning and some storyboards would have saved the day. You have created a situation where your only option is to roto your actor and the target frame, and then re-create the net and the background by hand. What should have been a half hour in post will turn into a few days, unless redraw you on it together to be something more stylized way. There is so much noise in the shooting of nets and the motion blur that RotoBrush will not follow anything other than a single image. You're going to have to cut your player by hand and rebuild the background and adjust the position, rotation and scale by hand one frame at a time. Do not count on making money on this one. There is not enough details around this one even to stabilize the shot to make it easier to roto. I tried.

  If it were my project, I would leave this one out or roto actor, throw in a bunch of lighting effects and completely forget reality to put this photo in a chart instead of a film.

  

• Sync the sound with MovieClip

  Hi people, I was wondering if someone could help me with my current problem - synchronization to a background music with a movieclip. I am aware that you can place a sound directly on the timeline of a movieclip: it was my first attempt to sync the two upward. Unfortunately the problem with this is that the sound (which is quite long), then will not STOP until its reading that I stop the movieclip or remove from the scene ends. I have also no control over the volume in this way.

  The only other method I can get to that is to keep track of the current image of the mc and trigger the sound manually, but this is still going out of sync if too many things happening at the same time and the framerate drops. I really need to be specific, so it's not great.

  Are there other ways to synchronize the sound upward? Or y at - it a way to get the sound to stop when I want to my first method?

  Thanks in advance,

  Dinkyfish

  If you attach your sound to your calendar and in the properties panel set the stream sync, it will probably work as you wish.

• Activate the camera with flash

  Hello

  I wonder how I can activate the flash for the camera in waterfalls? I don't want to use the camera only flash, like a flashlight. I have to open/close the camera, if? Where can I get access to them separately? I tried the sample application, but not what I'm looking for.

  My idea:

  Camera {
      id: camera
      onFlashMode {
        // code for enabling flash
      }
  }
  

  not exactly this way... FlashMode is a property of the camera settings, then they must be fixed to the camera.

  Camera {
      id: camera
      objectName: "camera"
  
      attachedObjects: [
      CameraSettings {
      id: settings
      }
      ]
  }
  

  You can then change the flashMode when clicking a button etc.

  camera.getSettings(settings);
  settings.flashMode = CameraFlashMode.Off; //On, Auto, Light etc...
  camera.applySettings(settings);
  console.log("flash mode is: " + settings.flashMode);
  

• sync the iPhone with iTunes but even different ical and contacts

  I would like to sync an iPhone to my mac, my wife and I share. Is it possible that I can connect on the same iTunes account to share our music, but keep our calendars, photos and contacts separate?  Currently, I have my own user account on the computer and I sync with iTunes, but it is not any music. If I put his music library in a shared folder that I have access on the two user accounts, can I delete everything on my phone to sync with the new iTunes library? I wouldn't delete all my apps and everything. Is there a better way to go about this? If it's important, we do not add music to our iTunes so it could be acceptable only for copying all music files once if it was the best way to ensure the rest of our things remain separated. Thanks for your help!

  Use the family sharing, as described here:

  Family shares - Apple Support

• How to sync the iphone with google calendar calendar

  How link and synchronize my calendar in my iPhone and iPad with my google calendar?

  I want to be able to create, view and edit items in my calendar on a computer (windows) with my google account, but the calendar from apple is the "master" calendar So, I want to synchronize my apple/iCloud to google calendar agenda and not the other way around.

  Note, I don't have an apple, nor access to one computer.

  Thank you very much!

  http://www.digitaltrends.com/mobile/sync-multiple-Google-calendars-on-iPhone-or-iPad /------.

  I hope these steps will help out you :)

• medium-sized images of the camera with IMAQdx

  Hello

  I need through the images acquisition of a camera and subtract the average of an acquisition of background image.

  Although I use an ethernet connection, the program is REALLY slow.

  I'm new with Labview so any suggestions is very welcome... I have attached the program

  This is not my best work, but take a look a this.  The same code acquires the two images, you just choose what image control stores the updated average image.  the Analyze button then processes what is in control of the two images (reference and absolute).

  Your problem is that you initialize constantly every time as an image.  Just do it once.