SyncCondvarWait_r() problem when you try to connect HTTP tutorial

Similar Questions

• Authentication problem when you try to connect

  I have a Linksys router. Connected WN2000RPT as described in the instructions of Netgear. Everything went through the lights very well, good, EXT appears on the scan available networks, etc. Tried to connect a Smart TV Vizio and burn TV Amazon tablet Asus. All 3 devices show... EXT with a strong signal. However, each device does not, connect with an error message 'Authentication problem' or simply 'cannot connect."

  My router is connected using personal safety ' WPA2/WPA mixed. " When you configure the wifi extender, I said to use the same SSID and the security that the router setting. Online reading on the settings available on the WN2000 and decided that the problem was perhaps a "lag" in the security implementation because WN2000 is not the same as available router setting. Do you have a factory reset on extension and returned to through the procedure, only not selected use the same level of security as a router, but manually selected WPA/PSK (AES) for the Extender. Same exact error of my devices as before.

  I thought that maybe by using the security settings of the router it was to spoil the Extender because they do not have the same settings available. But perhaps using different parameters (when the Extender receives the signal from the router, but perhaps on a "pass-through" only basis?) problems as well?

  So, can someone tell me if there is a way to get my devices to connect to the Extender, or this is always going to be a problem because the router has a security setting, and if I manually set the security OR say scope to use the same security settings, it will not work because the two units are not compatible? I'm doing something wrong? Any ideas? Thank you!

  Hello RealisticDave

  Did you have a different SSID on the router and not the same as routers SSID?

  DarrenM

• Have problems when you try to connect the app

  Anyone have struggled to try to log in photoshop on iphone fix 6

  Andzoe and EJ2310 .

  We just released Fix 1.2.1 to treat the following accidents:

  • 9.3 only iOS: difficulty crash at sign in.

  Please update and let me know if it solves your problem. Thank you!

  -Kathleen

• Problem when you try to connect to the Wi - Fi connection

  Hello

  I have an Inspiron 1545 with Vista. Two days ago, my internet works more all of a sudden, the laptop can capture the network available, but does not connect, I reinstalled all the software needed and tried to download the driver Intel(r) wifi 5100 several times that decompresses the laptop but seems to not work and is not in the section adapter in Device Manager. I reloaded all drivers in the order listed on the various positions on this site but still no joy. I can't seem to find where the computer downloaded the wifi5100 Intel (r) to. Can someone help, I'm extremely frustrated?

  Hi Nick,

  Looks like the operating system is corrupted here. Please backup your data and perform a PC Restore.

  Please find the link below using PC restore.

  http://Dell.to/Wj1rZe

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• When you try to connect to web sites like AKO .mil I am now told I have invalid certificates.

  invalid certificates

  When you try to connect to web sites like AKO .mil I am now told I have invalid certificates.  I have connected to this site from this computer several times in the past.  I contacted toshiba technical support and they said I don't have gpedit.msc - Group Policy Editor and need to have installed to solve my problem.  can you help me?

  Hello

  1. What version of Windows is installed on the computer?
  2. What browser do you use?

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/certificate-errors-frequently-asked-questions

  It will be useful.

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• ieframe error when you try to connect to yahoo canasta.

  Original title: error ieframe

  Tuesday night, I played canasta to yahoo.  I was not able to connect and play since then.  I get the following error... Please help!       RES://ieframe.dll/acr_error.htm#Yahoo.com, http://games.yahoo.com/games/login2?page=ca&ss=1

  I went to the microsoft website.  I had already cleared cache etc. etc.  I have RESET Internet explore and that got rid of the ieframe error.  Then, I was able to get into yahoo but could not go to a room.  Then, I uninstalled java and reinstalled.  I was then able to go to a room but not to make a table.  I checked the "add ons" and made sure to activate all the java.  I am now able to play canasta to yahoo.  I think that yahoo reset things because others spoke it as and when you try to connect... the screen where you must copy the letters and numbers you see... the page is HUGE and I have to zoom to 75% to get to the screen where I have to watch.  Even this screen I had to make smaller... so I have a few questions to understand.  Thank you for having responded so.

  Hello

  1. do you use the Internet Explorer browser to connect to the mentioned Web site?

  2. If so, what is the version of Internet Explorer?

  3. can you play a different game on the website or other sites?

   

  Method 1: Follow the link below:
  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

   

  Method 2: please follow the link below:

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• When you try to connect to internet it sometimes makes other times it doesn't.

  Sporadic internet connection

  My friend has a very annoying problem with the PC! When you try to connect to internet it sometimes makes other times it doesn't.
  The desktop pc is connected to the router/modem (D-Link WIFI ADSL 2 + G6242) via the ethernet cable, it communicates with the router, but
  not between the router and the net!
  I can connect without problems with laptop wireless, which indicates that the problem is with the Office
  and not the router!
  I suspect that the Office might be infected with malicious software. I've updated all the thing and run Malwarebytes, Spybot
  Search and destroy and Avast AV, nothing malicious is reported.
  I have restored to previous restore points, but the problem persists. It may be a corrupt file but which!
  I would have preferred to resolve this problem, otherwise I'll have to do a restore of the system Dell Factory!
  I'd love to help with this problem appreciate.

  Specifications of the PC;
  PC is connected to the router/modem (D-Link WIFI ADSL 2 + G624T)
  REB PC
  Computer:
  Computer Type ACPI (Mobile) 86 x PC
  Operating system Microsoft Windows Vista Home Premium 6.0.6002 (Vista RTM)
  Date: 2010-04-26
  Time 16:19
   
  OS Service Pack Service Pack 2
  Internet Explorer 8.0.6001.18904
  DirectX DirectX 11.0
  Motherboard:
  CPU type DualCore AMD Athlon 64 X 2, 2600 MHz (13 x 200) 5000 +.
  Card mother name Dell Inspiron 531
  Motherboard chipset nVIDIA nForce 6100-4xx, AMD Hammer
  Memory 2048 MB (DDR2 - 667 DDR2 SDRAM) system
  DIMM3: Hynix HYMP112U64CP8-Y5 1 GB DDR2-667 DDR2 SDRAM
  DIMM4: Hynix HYMP112U64CP8-Y5 1 GB DDR2-667 DDR2 SDRAM
  Type of Award BIOS (09/11/07)
    
  Display:
  NVIDIA GeForce 8300 GS (128 MB) video card
  NVIDIA GeForce 8300 GS (128 MB) video card
  Accelerator 3D nVIDIA GeForce 8300 GS
  Monitor Dell E207WFP (digital) [20 "LCD] (YM30682B6CFL)
    
  Multimedia:
  Audio adapter Realtek ALC888/1200 @ nVIDIA nForce 6100-400/405/420/430 (MCP61) - High Definition Audio Controller
    
  Storage:
  IDE controller NVIDIA MCP61 Serial ATA Controller
  IDE controller Standard dual channel PCI IDE Controller
  Storage controller Microsoft iSCSI Initiator
  Hard drive WDC WD50 00AAKS-75YGA SCSI Disk Device (465 GB)
  PBDS DVD +-RW DH - 16W1S SCSI CdRom Device optical drive

  Network:
  Main IP 192.168.1.2
  Primary MAC address
  Network card NVIDIA nForce Networking Controller)
    
   
  DMI:
  DMI BIOS vendor Dell Inc.
  DMI BIOS Version 1.0.7
  DMI system manufacturer Dell Inc.
  DMI system product Inspiron 531
  The system DMI 00 version
  DMI system number 5NNFJ3J
  DMI system UUID 44454C4C-4E00104E-8046B5C0-4F4A334A
  DMI Motherboard manufacturer Dell Inc.
  DMI Motherboard product 0RY206
  [NVIDIA nForce Networking Controller]
    
  Properties of the network adapter:
  Network card NVIDIA nForce Networking Controller
  Interface Type Ethernet
  Hardware address
  Connection connection to the Local network name
  100 Mbps connection
  MTU 1500 bytes
  DHCP lease obtained 26/04/2010 16:01:26
  DHCP lease expires 26/04/2010 17:01:26
  Bytes received 3931673 (3.7 MB)
  Bytes sent 279120 (272.6 KB)
    
  Network adapter addresses:
  IP / subnet mask
  Entry door
  DHCP
  DNS
    
  Manufacturer of the network adapter:
  Company name NVIDIA Corporation
  Product information http://www.nvidia.com/page/mobo.html 
  Download driver http://www.nvidia.com/content/drivers/drivers.asp 
  Update drivers http://driveragent.com?ref=59

  That's what shows in ipconfig/all, when it does not connect to the internet.
  Although I can connect with laptop computer when this happens on the desktop!

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC
    
  Primary Dns suffix...:
    
  Node... type: hybrid
    
  Active... IP routing: No.
    
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
    
  ... Description: NVIDIA nForce Networking Controller
    
  Physical address.... : (I have hidden for security)
  DHCP active...: Yes
    
  Autoconfiguration enabled...: Yes
    
  Autoconfiguration IPv4 address. . : 169.254.163.97 (Preferred)
    
  ... Subnet mask: 255.255.0.0.
    
  ... Default gateway. : 0.0.0.0.
    
  NetBIOS over TCP/IP...: enabled

  C:\Users\ >

  Of course, it does not show what it should show such as;

  Lease obtained...:
  Expiry of the lease...:
  ... Default gateway. :
  DHCP server...:
  I tried to reset with the following commands unsuccessfully;

  Start, all Programs\Accessories and right click on command prompt, select "run as administrator" to open a command prompt.

  In the command prompt window, type the following commands, each followed by the Enter key:

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer.

  Microsoft Windows [Version 6.0.6002]

  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Stebex>ipconfig/all

  Windows IP configuration

  Name of the host...: Stebex-PC
    
  Primary Dns suffix...:
    
  Node... type: hybrid
    
  Active... IP routing: No.
    
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
    
  ... Description: NVIDIA nForce Networking Controller
    
  Physical address.... : 00-1A-A0-80-67-76
    
  DHCP active...: Yes
    
  Autoconfiguration enabled...: Yes
    
  Autoconfiguration IPv4 address. . : 169.254.163.97 (Preferred)
    
  ... Subnet mask: 255.255.0.0.
    
  ... Default gateway. : 0.0.0.0.
    
  NetBIOS over TCP/IP...: enabled

  C:\Users\ >
  Would appreciate help please!

  Problem solved by a relocation complete!

• error when you try to connect to the internet via a modem usb - 6 error: the handle is invalid

  error 6: the handle is invalid - I see this error message when you try to connect to internet via usb modem

  I'm using windows Vista Home Basic and attempts to connect to the internet via a usb Huawei modem.

  but when connect this device on windows xp pro his works very well.

  but with vista I see this error msg

  The handle is invalid

  any idea to solve this problem?
  Thank you

  You can get in trouble with your device drivers, firmware and/or software.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you shouldat least make the modem and everything you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  Try to uninstall and then reinstall the modem again.  Remove the modem through Control Panel > phones and Modems, then uninstall the modem in Device Manager. Once the reboot is complete and it is reinstalled it should work (as long as you use the update of the above paragraph).  Make sure that you uninstall in this order.

  Are you sure that the modem is compatible with Vista and the rest of your system?  What is the manufacturer, brand and model?  You can find here:http://www.microsoft.com/windows/compatibility/windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry smartphones, I get an error when you try to connect to my world because of the r...

  I get an error when you try to connect to my world because of verizon replacement phones

  Hello!

  Your request should be sent as follows. Go to this address:

  • https://www.BlackBerry.com/CSOHelp/index.do?ft=generic

  and complete the form. Use, in the "Please select a component:"on the ground, AppWorld billing/payment selection. " Any other setting routera simply anonymously you on these public forums. Don't forget to also include the reason why you have exceeded your maximum eligible PIN associations to AppWorld (for example, several RMA, warranty replacement, etc..). If you do not have an "order number" for that field, just use whatever it is (for example, '123456').

  If the shape responds by telling you that your PIN is not valid, please report this fact back here also there is a path separate resolution for this problem.

  If this does not work, then please come back on these forums (http://supportforums.blackberry.com/rim/) and create an account so that we can provide direct assistance.

  See you soon!

• When you try to connect to a Yahoo link, like yahoo mail, I get (error code: ssl_error_bad_cert_domain)

  This connection is Untrusted

  You asked Firefox to connect safely to we - mg5.mail.yahoo.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.

  You use a bookmark to open this link?

  If you then try to open the page https://mail.yahoo.com/ instead and, possibly, change the URL of the bookmark to delete the foreground we mg5

  It is generally not a good idea to bookmark the pages directly as long as such links to specific areas can become valid.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Forgotten mini iPad 3 password, so I restored to factory settings, and now, when you try to connect back apple we still wonders of forgotten password!

  Forgotten mini iPad 3 password, so I restored to factory settings, and now, when you try to connect back apple we still wonders of forgotten password!

  If you have forgotten the password for your iTunes account (if you have settings > iCloud > find my active iPad you need to enter the id and password to reactivate the iPad): http://iforgot.apple.com

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.