Synchronize PXI-8512/2 and DAQ, PXI-6220 CAN

Similar Questions

• Connection of the PXI-4071 - can sound and LOs remain interconnected for the impedance of the cable 2, voltage DC/AC, frequency and waveform acquisition?

  Hello

  We use the DMM and SMU-6363 map to test a hardware device.  We will also use a PXI-2530 b switching matrix.  We will use the digital multimeter to perform the measurements of voltage, DC and AC, measurements of impedance (2-wire and 4-wire), frequency and waveform acquisition.  Can the PXI-4071 left be 4 wire connected (black jacks taken connected and red connected) mode and still be used to perform all other measures (including 2 impedance of the cable).  This would simplify the switch connections.

  Current measures use the son + and LO, but the HI and S-can remain connected.  The problem you are having is if you have an active device the digital multimeter and take you a 4-wire resistance and the measurement of voltage with all 4 wires connected and then change to a current... When you do this, short-circuit you the terminals of the DUT, on that you just take the measurement of the resistance.  If the terminal HAD, say, a power supply 10V, then you have just shorted out.  Of course, this isn't a problem if your Instrument is a passive device, or if you change just the unused two lead whenever there is an active device of low impedance.

  If you want to make voltage, current and 4-wire resistance, you need all 4 wires.  If you want to do the voltage and current, you will need 3 wires, but you could connect the s + Hi and then just do the two wires.  I vote running every 4 son to your DUT for maximum flexibility.

  2-wire resistance is a must if you are measuring resistance above 10 MOhm.  Alternatively, you can use 4-wire for all measures.

• PXI-8464 can test Panel

  Hello

  I'm trying to monitor the messages WHICH are transmitted across a network CAN, and I was wondering if I could use the Test Panel NOR CAN do that?

  Currently I have a PXI-1052 chassis and a couple of PXI - 8464 CAN / XS two cards in the series.

  I'm relatively new to LabVIew using CAN, but any help at the start would be appreciated.

  
  

• Synchronization of e-mail and contacts with icloud

  I have an iphoneSE c. 9.3 (last updated) and win 10 computers.  I want to synchronize my computer messaging and contacts with my phone.  I need to create an e-mail for this icloud account?  Also, I'm confused by what I should turn on or off in the settings.

  Just set up the e-mail account with the same information on your computer to your phone:

  Set up an e-mail account on your iPhone, iPad or iPod touch - Apple...

  This discussion might help the synchronization of contacts:

  How can I sync my Iphone contacts with laptop running Windows 7

• How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when the iPhone is connected?

  How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when plugged in? I recently upgraded my PC. I have restored my backup of iTunes on the new computer and it works fine. The iPhone, however, is waiting to synchronize wirelessly to the PC that I no longer use, and iTunes does not recognize my iPhone when I plug.

  I came across this problem recently and had to talk to Apple

  If you mean the computer name listed in the settings - iTunes WiFi - Sync

  Then, it's exactly what I'm talking about

  I had to not reset my - no joke - general - reset - Reset all settings - no content has been damaged and there is NO need for a restore

  Lost among others

  All my WiFi passwords

  All of my alarms

  All my preferences of location services

  BUT he did remove the old name of the computer from there

• What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.

• I signed up for Apple music and since then I can't synchronize playlists from my computer to my phone because it says I have iTunes game turned on, but I do not subscribe to iTunes recently Match (ish). How to make this stop?

  I signed up for Apple music and since then I can't synchronize playlists from my computer to my phone because it says I have iTunes game turned on, but I do not subscribe to iTunes recently Match (ish). How to make this stop?

  Hello

  You cannot synchronize in usb or wifi if you subscribe to the Apple's music. The basic principle of the AM is that your iTunes library is scanned to determine what can be matched or must be downloaded. Once completed, all the music you will be available to listen to or download on your iOS device.

  Jim

• Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized

  try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong

   
  Moved from feedback
  Original title: device

  "You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.

  As you do not tell us that "phone and helps OS it runs there is little more we can give."

• What happens to the data on the server if I stop the synchronization of users movies and music?

  Hi all

  I have a small question which is, what will happen to the data on the server if I stop the synchronization of users movies and music etc.

  The data will remain on the NAS or it will be deleted

  The domain controller is a Windows 2008 r2

  All of the client Machines are Windows 7

  Any help is appreciated

  Thank you

  Daniel

  Hi Daniel,.

  This question is more suited for a TechNet audience. I suggest you send the query to the Microsoft TechNet forum. See the link below to do so:
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please let us know if you have more queries on Windows.

• Synchronize the beetween HSS and planning question

  Hi all
  
  Product: Planning 11.1.1.2
  
  We had a problem on the server HSS and we cannot restore file OpenLdap.
  We had to re-create groups on HSS, but these groups are not synchronized with the planning groups (I guess that different SID)
  
  Do you know if the UpdateUsers utility I synchronize SID between HSS and planing?
  If this is not the case, do you think I can change the SID directly in the tables of HSS or repository of planning so that the two will be the same?
  
  Is there another solution?
  
  Thank you very much
  
  Sébastien

  If users were the provision of Shared Services, then you can give the utility updateusers a go and see if it syncs the planning tables save with Shared Services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• My files will not synchronize with creative cloud and maybe it's the way I am naming it how to choose a proper name?

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/0.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/2.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/3.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/5.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/7.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/11.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/13.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/17.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/19.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/23.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/29.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/31.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/37.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/41.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/43.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/47.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/53.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/59.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/61.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/67.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/1553.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/1637.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/149315125.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/1015814935.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/1231441855.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/25192022125.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/191655423125.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/Sequence1.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/Sequence2.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/Sequence3.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/Sequence4.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/Sequence5.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/Sequence6.PSD

  file:///users/ChOcOlAtE/creative%20Cloud%20Files/Sequence7.PSD

  What are the names of the files and none of them can be synchronized. What I am doing wrong?

  No, looks OK. Whatever you have questions have other causes, but since you have not provided the system information, details about your files or your Internet connection we can not really help you.

  Mylenium

• Just found out that my intrnet provider has an imap email set up and means that I can not leave a copy of my mails on the server, correct?

  Just found out that my intrnet provider has an imap email set up and means that I can not leave a copy of my mails on the server, correct?

  Incorrect... IMAP is synchronized. So to remove a mail locally and deletes it from the server.

• My ID apple has been disabled, but it seems only on my phone, iPad and iPod, but I can still access it on my macbook and iMac.

  My ID apple has been disabled because of the money being taken off on purchase I've ever made, to which I was refunded, but I noticed recently that my account has been disabled only on my phone, iPod, and iPad. but I can still use the account of my macbook and iMac, but I would like to know how to reactive the account on my other devices I tried to raise myself by changing my password but nothing has worked. can someone help please I really need to work?

  I could suggest things like disconnection and signature, but I think that the only solution to get to the bottom of this problem is to contact the Apple Support:

  Contact - Support official Apple

• my firefox has been updated yesterday, and since then I can't copy any link in a text of the e-mail, more. I drag the address of the page, but the link does not work. Thank you.

  my firefox put updated yesterday, and since then I can't copy any link from a web page in an e-mail message more to send. usually, I could drag the address of the page and it automatically copied the blue link and it could open. now, it does not work. I use gmail, but I don't think it is related to the post.

  In Firefox, you usually use a string as button in the toolbar all foregoing enamel make up the zone Editor to create a clickable hyperlink.
  
  Sometimes, it happens automatically if you send the message, but I've never seen this in Firefox when you compose a message.

• I do not have the security on my browser lock and need to how can I be sure stuff is safe?

  I have no lock on my browser and duty security how can I be sure that my stuff is safe?

  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server. So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL. The lock feature has been replaced by the identity button of the Site on the left end of the address bar (address). Extension locks mentioned above will help you to remind you if you're always looking for the padlock icon.

  This actually exists since Firefox 3.0 is not new.

  Another link to this topic.
  http://www.Mozilla.com/en-us/Firefox/security/identity/