synchronize slides with recorded narration

I try to synchronize and save slide show with balls and slides synchronized with the recorded narration but recorded track replay in registration mode although it plays fine in playback mode.

recorded track replay in registration mode although it plays fine in playback mode.

Do you mean you can select: play slide show recorded, but it does not at all read or he plays bad?

If so, disable the check from: play > clear the record... then save the slide show again.

Tags: iWork

Similar Questions

  • Its mixed? While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds will play together. How to avoid what is happening?

    While playing the slide with audio, if the customer has hit a tab with audio interaction, two sounds play together, which is not a good customer experience.

    How to avoid what is happening? Placing a marker can help, but cannot solve the problem when the compliant/no intentional user, press tab.


    Better, if the presenter can triggle tab automatically at some point, or click interaction, no game bar function.

    Hi Louie,

    My sincere apologies for not being able to help on your previous question.

    Now, that the Interactions are concerned, they were initially designed to be placed as standalone content on the slide.

    Also if you try to resize your interaction and place it on the slide as well as other content/objects released published will always give a priority to the Interaction that it deemed to be a specific slide of Interaction.

    In the previous project, you shared, you try to time the Interaction with PowerPoint animations and wanted it to appear later on the set of slides, rather than on the start. But, as explained above, presenter honored not this setting in your project, because he in fact has considered a slide of interaction and display interaction since the beginning of the slide room itself.

    Also the number listed in this thread is concerned, there is no direct way to do it but I would like to suggest something that might help.

    If you want to keep the interaction on your slide and other content, Interaction will be available at the beginning of the slide. Surely there is no way that delaying his appearance, but you can still use animation related to Interaction in another goal. Within your presentation-> playback option settings, you can enable the feature of 'Pause after each animation' (see screenshot below). It will essentially help you achieve the function of auto-faisant a break from your animations, using your narration would automatically stop, just before you claim in your narrative and inform the learner to click on the different tabs of the Interaction. All you have to do is your narration and animation correctly so that the slide play does not break too many times in the time interval. Hope you find the idea of what I'm trying to say.

    Please mark this answer as being correct, if you find it useful. We would certainly look at such scenarios to be achievable directly at the request of our updates and later version.

    Thank you

    Zeeshan Hussain

    Adobe Presenter Engineering Team

  • Are their known issues with a narration in first 13?

    I'm having a devil of a time seeking the narrative to work directly in first 13

    1. first of all, to hear the sound in my headset when I told. The code is bad - if I want audio mute box should work and the cursor should stay put.

    2. then he clippeed some of my audio out-point

    3. now I can't even hear recorded narration follow at all!

    I am to discover that the first 13 Narration sucks.

    What this Adobe and Adobe community? Are their known issues and what is the reference for this?

    Thanks for the reply. Before you see your reply, I did the following:

    • I started a completely new project, suspecting that the old project was corrupt... that it was. I couldn't hear anything!
    • I then discovered that it was preferable to leave the Panel open record. Drag the volume slider to the left and uncheck the mute audio (obvious wrong code)) and have experienced the strange stop without me hitting the stop button at all.
    • Then, after receiving your response, I finally read document Adobes creation of Narration that explains how the recording and playback Protocol is designed to be used.

      Frankly, I prefer to control my own key for registration. Another way is frankly weird and personally frustrating. Finally, after using Adobe Premier narrative in function how it was designed to be used my productivity and I could pass at the end of the project by recording a few sentences at a time, and my my narration of project as a series of short clips. .

    Thanks again for responding. I am now able to continue my project without so much anger and frustration so much.

    Art Johnson

  • Conectivity test that my pc can't find my iphone so I'm not able to back up or synchronize it with my pc

    updated to ios 10.0.1 and now when I run the conectivity test my pc can't find my iphone so I'm not able to back up or synchronize it with my pc. everytime I connect my phone to my PC the pc revealed the companion phone which is no use to me as I want to get back to the top of my IPhone and syncing old content like movies without having to use my wireless

    You have restarted your computer?

    If iTunes does not recognize your iPhone, iPad or iPod - https://support.apple.com/HT204095

    Device are not not immediately after the upgrade - https://discussions.apple.com/thread/6573744 - try to restart

    Make sure you use the original or a spare cord Apple. Some third-party cables transfer that power and no data signal.apple.com/message/28002758#28002758

    https://discussions.apple.com/message/29154537#29154537 - removed then reinstalled iTunes application

    July 2016 Lawrence_Finch post - https://discussions.apple.com/message/30402529#message30402529 - connection dirty?

  • Is the old puzzle slide with the Rainbow Apple logo always around here?

    Is the old puzzle slide with the Rainbow Apple logo always around here?

    For people who still have the old Mac OS 9, it is, but you must before mid-2006 PowerPC Mac to run it in classic, or to get a such a Mac ROM to install with a program called Sheepshaver.  Depending on your country, get a such ROM cannot be legal.

  • I can't call anyone on Skype, he said only: "problem with recording device" help?

    Could someone help me? my lack of Skype let me call anyone, when I try to call or answer a call it comes a message saying "problem with recording device"-does anyone know how to fix this help please!

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=no&cc=no&DLC=no&sw_lang=&product=7264...

    You can install this "driver - Lyd" (Realtek High-definition-lyddriver (HD))

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-135685-1&CC=no&DLC=no&LC=No... =

  • Slide with several digital poster Down filter event Bug button?

    A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to the next control. Same behavior at fault if you want to move the cursor on the left/right keyboard, nothing happens. Anyone an idea why?

    A simulation of that VI is attached. All other controls, a Slide with a digital display or a standard digital control, the key Down event filter behaves as expected... I tested in versions 8.5.1 LV (attachment), LV2012SP1 and LV2013.

    A teammate now found a solution or workaround. We do not know if this is the way it should be, if yes, then it's a bit hidden, but it works!

    It seems that the cursor needs to know on what digital display the FocusObj is when you use the event notifier KeyDown. Then, when to get the reference of the digital display active and the wiring of this reference to the terminal FocusObj filter event everything works as expected, numbers of tabs, typed, cursor etc and have to filter and notify events structure to the event.

    A vi and a printscreen are attached.

    The question is probably due to the specialty of slides and the class NumericWithScale in general, as its digital displays are a little under References and during the implementation of the features of event KeyDown for the class NumericWithScale filter, LV simply does not know on which side of the main action control part must be executed.

    Or someone has a better solution and explanation?

  • How to synchronize HAVE with the meter?

    Is it possible to syncronise HAVE and readings of CTR? I use a unit of M series and LabVIEW I created a task HAVE several entries with the CTR of a channel that serves as a measure of angular position. It is easy to make a measure of countinous stored stamped with the analog inputs. But with the same sampling rate, I would like to read the meter. DAQmx forces me to use an external clock for the acquisition of meter source. Is there a (simple) solution?

    This can easily be done using AI/SampleClock (internal signal of the DAQ card) as the source of the task of counter sample clock. See the tutorial called synchronization M with LabVIEW and NOR-DAQmx series (Multi-Function synchronization) and do a search of AI/SampleClock on the forums for discussion OR for more details.

  • Mashita dvd - ram uj-820 s is with record burning now! or windows

    Laptop Toshiba equium a160-155 came with record now!  Base

    Hi Phillund,

    ·         What is the exact error message that you receive?

    ·         Since when are you facing this problem?

    There are few users who had the similar problem and solved it, you can check out the link below and check if that helps.

    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=50720

    If this does not resolve the issue, I recommend you perform the clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • BlackBerry smartphones to synchronize "BOLD" with the law! 6.0

    Hi all:

    How can I synchronize "BOLD" with the law! 6.0? My consultant advised through Companion Link, i have a problem because it is redundant with the list of contact every time I sync. Is there a way to synchronize directly (between "BOLD" and the law), or y at - it another software I can try?

    Thank you.

    Problem solved!

    I got a new "BOLD" of the telephone operator, updated the companion link, update of Desktop Manager and removed some unnecessary files from Companion Link. The problem is probably related to the "BOLD".

  • I have a problem with the Narrator, repeating words and phrases.

    original title: NARRATOR in WIN7 SUPPORT

    I use windows7.  The annoying Narrator sometimes voices repeat words and phrases.  I also need help, change of voice and using Narrator to read aloud my text book I downloaded.  It is in PDF format.

    Original title: Narrator sometimes repeat words and phrases

    Hello

    Thanks for posting your query in the Microsoft Community.

    You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

    Please answer these questions-

    (1) exactly where you run the Narrator?

    (2) the Narrator extends from a particular document?

    (3) have you made changes on the computer before the show?

    I would like more information about the issue.

    Method-

    I wish that return you the items for assistance-

    Narrator doesn't read what I expect him

    http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn

    Hear text read aloud with Narrator

    http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

    Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

    Thank you.

  • XMLTYPE with record type

    Hi friends,

    Is it possible to use XMLTYPE with record types?

    For example, in the following code I expect output voltage

    < TY_EMP > < > 1001 EMPNO < / EMPNO > < ADAMS ENAME > < / ENAME > < SAL > 5000 < / SAL > < TASK MANAGER > < / JOB > < / TY_EMP >

    The code is...

    DECLARE

    Ty_emp RECORD TYPE IS

    (

    EmpNo INTEGER

    , ename VARCHAR2 (100)

    NUMBER of sal

    , VARCHAR2 (100) employment

    );

    r_emp ty_emp;

    BEGIN

    r_emp.EmpNo: = 1001;

    r_emp. Ename: = "Adams";

    r_emp. SAL: = 5000;

    r_emp.job: = "MANAGER";

    -This line gives the error.

    dbms_output.put_line (XmlType (r_emp). GETSTRINGVAL()); -Here, I don't want to talk about all the fields in the record. I just need to specify the name of the record.

    END;

    p.s. to use object types to generate XML data...

    SQL > ed
    A written file afiedt.buf

    1 TYPE to CREATE or REPLACE ty_emp () AS OBJECT
    2 empno INTEGER
    3, ename VARCHAR2 (100)
    4, NUMBER of sal
    5, job VARCHAR2 (100)
    6*   );
    SQL > /.

    Type of creation.

    SQL > ed
    A written file afiedt.buf

    1 DECLARE
    2 r_emp ty_emp: = new ty_emp (null, null, null, null);
    3 BEGIN
    4 r_emp.empno: = 1001;
    r_emp.ename 5: = "Adams";
    6 r_emp.sal: = 5000;
    7 r_emp.job: = "MANAGER";
    8 dbms_output.put_line (XMLTYPE (r_emp) .getstringval ());
    9 * END;
    SQL > /.
    1001 Adams 5000 MANAGER

    PL/SQL procedure successfully completed.

    SQL >

  • Master slide with the scenario, reference, reference active / disable

    I have a model of slides with this little built in purple overlay:

    The three icons are smart shape filled with image buttons that play white in the bearing and States out of service.

    I want to use them on slides unguided practice for:

    • Scenario - Toggle text caption. Scenario is checked by default on a previous slide in its entirety, it would be a reminder for the slides, that it applies to (good for several slides)
    • Tip - Toggle text caption. Used when the learner gets stuck, sort of a hint of specific workflow (changes slide to slide)
    • Reference - link. Open a tool of work with step by step instructions.

    I would like to use variables so I could control to show exactly when these rockers are used on each slide, and I guess that I need stocks advanced on my model of slides.

    How can I do this?

    Long ago, I explained a similar workflow in these forums and blog on this subject:

    'Beat the system' - save time by creating advanced Actions (Captivate) - Captivate blog

    It is the workflow, I'd certainly use for the Tip:

    1. create a v_hint of user variables
    2. insert this variable in a text container on the first slide where you need (form or legend, I always mention that, because the shape is much more flexible for the style) and don't forget to adjust the length as high as possible. in previous versions maximum number of characters in a variable used to 256, but Rod pointed out, it is now lower (about 150)
    3. make this large enough text container, so that it can have your longer index and the time for the rest of the project, always on top.
    4. Create the action of the show/hide button that container (have several blog on shape toggle buttons)
    5. Create a joint action or a tip action that must be triggered by pressing enter for each slide where you want the features. It will be quite simple: assign v_hint with «...» ' (text you want for that slide being in the indicator); I would have preferred a shared action on a bunch of advanced duplicate actions because they save on the size of the file, and you can manage the library

    You can use the same approach (with a different user variable) for the script, but due to the limitation of the length of a variable and the fact that you have only 3 different versions, I would argue just to have 3 different, but still timed text containers for the rest of the project and always on top.

    With respect to the URL, I'm afraid you will have to use JS. I think that TLCMediaDesign (David Crawford) posted on this workflow.  Publish to HTML or SWF? There are widgets autour.

  • Apple and Adobe fixed the problem of ink and slides with iPad 2 Air again! It's summer is really long!

    I wonder what the updates on the issue of ink and slides with iPad 2 Air, has been set yet! It's summer is really long!

    No - Sorry to say. But it loks like a case of death for me. We use all this money on paper and pens next time I will wait 1-2 years before trying to summarize fancy gadgets / hardware from Apple / Adobe - I'll stick to Wacom for sure.

  • I use 8 Captivate. Here's my problem: I have a slide that has narration in the background.  I want to stay on the slide until the story is complete, no matter if the user steh bittun click Next and allow it to

    I use 8 Captivate. Here's my problem: I have a slide that has narration in the background.  I want to inform the user about this slide until the story is complete, before moving on to the next slide. Any ideas?

    Something like this: Force first discovered - Captivate 8 - Captivate blog ?

Maybe you are looking for