Synchronize the case structure with enum update

Similar Questions

• Do nothing in the case structure with loop For

  Hello

  I am trying to extract data from my signal (0.3 0.4 0.6...). I want to extract values greater than 0.5 and put it in a table. If I use a loop For which I can determine each index of my data to be compared and it happened in the structure of the case. In the 'Real' box, I wanted the value to extract outside the loop For. And I want to "do nothing" if my value falls within the box 'False. ' However, it displays error, saying "' Tunnel: lack of assignment to the tunnel '."

  I tried to select 'Default', but it does not work since I use a Boolean comparison. I tried to use the registry to shift, but in vain too.

  Someone could guide me on this to extract only a value greater than 0.5 and index them?

  For example "0.6 0.7 0.8; 3 4 7 index.

  Satisfaction will be given.

  

  

  Here you have

• structure of the case of base enum

  I inherited code that extensively uses enums (typedef) as the selector of the case. There are usually 2 or three separate cases, all enum items are grouped together functionally. Enums are listed in the individual case structure (if they are not contiguous) or they are grouped together in the ranks in the tag selector. The "range" is the thing that gives me headaches.

  In order to change the code, I need to add items to the typedef enum. Depending on where I add the point, different actions may occur. If I add a component between two consecutive elements, it creates a range (no broken arrow) and uses this case. If it is placed within an existing range, it also uses this case to the beach (no broken arrow). I can add to the 'end' of the list without any problems until the customer wants choices sorted differently. Even after obtaining the program be effective, new sorting of enum causes the case structures recalculate the lines. This can break the code, or it can use an unexpected case "range". It's a nightmare to debug.

  I searched the forum and the only solution I found is to have a case for each enum item (this by definition would imply no. VARIED). It seems exaggerated, especially if I have 20 items or more in the enum and there are really only two choices in the structure of the case. For any small change in the code, I have to edit each individual case (probably easier create a Subvi and change that). It has to be a simple solution. If I could select explicitly enum items rather than to have LabVIEW automatically generate a range, my problem would be solved. Is there a property to stop the creation of these darn ranges? Any help would be greatly appreciated.

  Use a ring of text instead of an enum.  The enum changes the values to be sequential.  A ring of text will allow no sequential values.  When using a ring of non-sequential text, the value assigned to a specific item moves with him.

• problem of data flow in the case structures (using a state machine)

  Good day everyone.

  I'm having a problem with the flow of data between the structures of the case.

  I try to use an example of a state machine for this simple problem. but when I try to send data of a box structure to change the State of the code. It will change not in the desirable output, instead, it offers the possibility that the exit options emul.

  could someone please point what I'm doing wrong here. Any kind of help would be very appreciated.

  With a quick glance at your photos a question you have is that you use not data flow. You write your status updated in local variables value. Your State should pass through the case structures are a single wire. Playback of your order "Enum", happened in the register shift on the right side of your loop probably get running and reading before any processing occurs within the structure of your business. That's why you're reading the old value of the State and not the update. or have a classic case of a race condition in your code.

• DAQ Assistant no recorded data during the case structure is false

  I try to turn it on turn off heater using intermittent relay module (some time and some free time). The program attached that do very well. Except that I also want to record the temperature of the radiator using materials DAQ Assistant and it records all the data when the case structure is false. I mean, when the relay is off. I tried to use the vi for the acquisition of data in the structure of the case. However, aparently it is not possible to call the module analog input even twice in the same program. All solutions? Thanks in advance.

  
  

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• How to synchronize the complete catalogue with mobile phone

  I plan to update my old LR5 to Lightroom CC.  The idea of making all my changes and management of any of my devices is interesting for me, so I downloaded the demo to test the functionality.  I quickly discovered, however, that I can't synchronize my catalog, only the collections - and only non-smart who.  I don't know if the feature is really limiting as it sounds, or if I'm just not understand it.  So I came here for help!

  I always got my photos via a hierarchical directory... structure loosely, yyyy/mm/eventname.  If it is really only possible to synchronize collections static, all my pictures in this directory structure are prohibited to Lightroom.  It seems to me that if I want to change (or even see) my photos on my iPad and al, I need to import my photos in Lightroom, as usual and then manually maintain a collections structure that reflects the structure of my library.  Is this the case?

  Am I misunderstand how the synchronization works?  I put my catalog organized for editing with Lightroom Mobile online somehow?  Or I would be limited to only the photos that I manually maintain collections for?  (I say "would" because it is way more trouble than it is worth for me)!

  Help me get into this cloud thing!  I only 29.5 days left on my trial to find a solution!

  It is probably not enough space to put your catalogue online cloud and it would be very slow.   The synchronization process is for the initial edition more than the most recent shoot with the rest of the edition that happens on your desktop.

  I have two desktop computers and put my catalog and recent photos on a USB drive connected and who back up to another USB drive connected, in case I lost or destroy my external drive.

• Photoshop CC worm. 14.2.1 is the latest version? If this is not the case, how can I update the sw to the latest version?

  I have a license for PS CC installed on Mac. I would like to know if the version I have (14.2.1) is the update.  If this is not the case, how can I download the latest version? Thanks in advance.

  It is the most recent.

• If this isn't the case, juggling with the updates of the Firmware installation will be updated install all prerequisite updates?

  I am currently using a Netgear WNR2000v3 wireless router. I've never installed the Firmware/Software updates. If I install the latest update of the Firmware/Software

  (Firmware Version 1.1.2.10), this includes all previous updates or do I return completely and install the updates of the Firmware/Software in the order in which they were made?

  Just the last one will do.

• Synchronize the Table Users with user Table SFDC Eloqua... has anyone done it?

  We can now use autosync integration to new downloads and update existing users of Eloqua that exist in the Salesforce.com user Table. I built a proof of concept to do this, so that SFDC is the system of registration of data of rep because I've been in a situation where marketing updates users eloqua for customization and data does not match what exists in salesforce, duplicate efforts...

  In any case, here are some of the complications that I find so far:

  The key identifier Unique to the Eloqua user Table is the 'User name' field and cannot be changed (his knowledge actually not yet public, I had to find out the hard way) that it should really be, e-mail address. According to Eloqua, the username is "firstname.lastname", "Nick.McGirr" would be my username Eloqua.

  1 Salesforce.com User Table does not have a username like that field. Your team of DEV SFDC will probably have to invent one that will take the first name and family name and create "first.last" on a new field to map to for your autosync.

  2. here's the real question, what does Eloqua if the company of enterprise-level and has a handful of John Smith of sellers? Do I need to say to the SFDC DEV team to make 'John.Smith1', 'John Smith2' and 'John Smith3'? What is the convention of naming of duplicates?

  I've referenced that a certain time before being published as a feature that there could be a possibility to do this type of synchronization, here. Some might find this information useful to this topic: http://topliners.eloqua.com/message/1795

  Hi Nick,

  We have done that... and implemented the exact logic you mentioned... with minor twist... take the first name, last name and add the ID unique company Emp in a field and operate as username for Eloqua. You can even add

  I hope this helps.

  Thank you

  Amit

• How to synchronize the photo library with the photo existing on iMac and iCloud library?

  Recently, I did a troubleshooting with Advisor to Apple for my iMac with the last OS X that I had a problem connecting to iCloud. Then he asked me to turn off services iCloud, including photos of iCloud but leaves all the databases. So now the problem went but when I turned on the photos from iCloud, it started to download all the photos back to the iCloud (6300 + pictures) instead of synchronization as it should.

  Is it possible to recognize the photos with the iCloud desktop library? Thank you!

  It's sync - just let it go - once you disconnect, then reconnect it must check each picture in order to ensure that it is correctly synchronized - i.e. how she "reconizes" that the photos are a ther

  LN

• The case structure and diagram disable abnormality of structure!

  
  

  I see the behavior it describes.  I went back to 8.0 and see this behavior.  The documentation that you linked to is a bit misleading in places and flat in others.  If you build your VI in an exe, it behaves as expected.  I think "compilation" in the links is back and forth between LabVIEW compile source code to run in LabVIEW and LabVIEW (building) of the compilation of the source code in an EXE file.

  In 8.0 structure dealing with a cable constant to it does not work in LabVIEW or EXE.  8.2 and later, he worked in an EXE file.  In all versions of 8.x, disable diagram structure will the VI memory in the EXE file.

  Thus, article area devloper is the confused and false in some places, as this only works when the VI is integrated into an EXE file.

• Help in the CASE statement with amount

  Hello Experts
  
  I amw Group on
  
  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  I'm unable to solve this Case statement.
  
  My requirement is that if the value of the attribute is greater than 50, then add 1 to the sum for attribute 4 the sum should be 4
  
  
  WITH T AS
  (
  Select MATH_CONV_SCR 70, 68 MATH_PERC, writ_conv_scr 66, 67 writ_per Union double all the
  Select MATH_CONV_SCR 70, MATH_PERC 48, writ_conv_scr 66, 67 writ_per Union double all the
  Select MATH_CONV_SCR 70, 68 MATH_PERC, writ_conv_scr 66, 67 double writ_per
  )
  (
  Select)
  CASE
  WHEN MATH_CONV_SCR > 50 THEN 1
  WHEN MATH_PERC > 50 THEN 1
  WHEN WRIT_CONV_SCR > 50 THEN 1
  WHEN WRIT_PER > 50 THEN 1
  TOTAL END)
  T
  )
  
  
  The expected answer is
  4
  3
  4
  for the respective folders
  
  
  Please give me the solution
  
  Thank you
  
  RB

  Hello

  Rb2000rb65 wrote:
  Hello Experts

  I amw Group on

  Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production...

  Thanks for posting the version and sample data; It is very useful.

  ... Select)
  CASE
  WHEN MATH_CONV_SCR > 50 THEN 1
  WHEN MATH_PERC > 50 THEN 1
  WHEN WRIT_CONV_SCR > 50 THEN 1
  WHEN WRIT_PER > 50 THEN 1
  TOTAL END)
  T

  Don't forget that the WHEN of a CASE expression clauses are mutually exclusive. If none of them are evaluated to TRUE, then all of the following are not even tried.

  )

  The expected answer is
  4
  3
  4
  for the respective folders

  Please give me the solution

  Here's one way:

  SELECT  CASE WHEN math_conv_scr > 50 THEN 1 ELSE 0 END
        + CASE WHEN math_perc      > 50 THEN 1 ELSE 0 END
        +     CASE WHEN writ_conv_scr > 50 THEN 1 ELSE 0 END
        + CASE WHEN writ_per      > 50 THEN 1 ELSE 0 END     AS total
  FROM       t;
  

• With the help of the Case clause with clause type

  Hello PL SQL gurus
  
  I used a few scripts I found on these forums to create an amortization of mortgage statement. What I'm trying to accomplish is to get the script to run a calculation or use a value in a table based on the value in this table.
  
  Here are two tables:
  
  
  CREATE TABLE mortgage_facts (customer VARCHAR2 (20), result VARCHAR2 (20),)
  quantity NUMBER (10.3));
  
  INSERT INTO mortgage_facts VALUES ('Smith', 'Ready', 131828.81);
  INSERT INTO mortgage_facts VALUES ('Smith', 'Annual_Interest', 3,348);
  INSERT INTO mortgage_facts VALUES ('Smith', 'Payments', 72);
  INSERT INTO mortgage_facts VALUES ('Smith', 'PaymentAmt', 0);
  
  
  Mortgage of CREATE TABLE (customer VARCHAR2 (20), pmt_num, no.4, principalp NUMBER (10.3), interestp NUMBER (10.3), mort_balance NUMBER (10.3));
  INSERT INTO mortgage VALUES ('Smith', 0, 0, 0, 131828.81);
  
  
  
  If the value in the mortgage_facts table is zero, I want the script runs a calculation to be used in a MODEL clause. If it is not zero, I would use this value instead of the calculation. Here is the script I am getting an error on (I have bolded the part in question):
  
  
  
  SELECT c, p, to_char (round(m,2), 'fm$ 9999999.00') principal_balance,
  TO_CHAR (Round(pp,2), 'fm$ 9999999.00') towards_principal,
  TO_CHAR (Round(IP,2), 'fm$ 9999999.00') towards_interest,
  TO_CHAR (Round(MP,2), 'fm$ 9999999.00') monthly_payment
  MORTGAGE COMPANY
  MODEL - see 1
  IGNORE THE NAV
  REFERENCES R ON
  * (SOME customers, fact, amt - see 2 *)
  FROM mortgage_facts
  * MODEL SIZE (customer, done) MEASURES (amount amt) - see 3 *.
  REGULATION SEQUENCE
  *(*
  CASE WHEN mortgage_facts.fact = 'PaymentAmt' AND mortage_facts.amt = 0 THEN
  *(*
  * amt [ALL, 'PaymentAmt'] = mortgage_facts.amt*
  *)*
  
  ON THE OTHER
  
  *(*
  * amt [everything, "PaymentAmt"] = (amt [CV (), "Ready"] *)
  * Power (1 + (amt [CV (), 'Annual_Interest'] / 100/12), *)
  (* AMT [CV (), 'Payments']) *.
  (* AMT [CV (), 'Annual_Interest'] / 100/12)) / *.
  * (Power (1 + (AMT [CV (), 'Annual_Interest'] / 100/12), *))
  (* AMT [CV (), 'Payments'])-1) *.
  *)*
  END
  *)*
  *)*
  
  SIZE OF (customer cust, made) measures (amt)
  Amortization of PRINCIPAL
  PARTITION BY (customer c)
  DIMENSION (p) 0)
  MEASURES (pp, interestp ip principalp, mort_balance m, mc, mp 0 customer)
  REGULATION SEQUENCE
  ITERATE (1000) UP TO (ITERATION_NUMBER + 1 =
  r.AMT [MC [0], 'Payments'])
  (ip [ITERATION_NUMBER + 1] = m [CV () - 1] *)
  r.AMT [MC [0], 'Annual_Interest'] / 1200,.
  MP [ITERATION_NUMBER + 1] = r.amt [mc [0], "PaymentAmt"],
  pp [ITERATION_NUMBER + 1] = r.amt [mc [0], 'PaymentAmt']-ip [CV ()].
  m [ITERATION_NUMBER + 1] = m [CV () - 1] - pp [CV ()]
  )
  ORDER BY c, p
  
  Any help is very appreciated. Thank you!!

  OK, here we go, go with the iterative model:

  select *
  from mortgage_facts
  model
  partition by (Customer)
  dimension by (1 p)
  measures(loan, payments, INTEREST, PAYMENTAMT, INTERESTPMT, PRINCIPALPMT, balance)
  rules iterate(1e9) until (iteration_number+2 >= payments[1])
   (loan[iteration_number+2]=loan[1]
   ,payments[iteration_number+2]=cv(p)-1
   ,interest[iteration_number+2]=interest[1]
   ,paymentamt[iteration_number+2]=ROUND(
    (LOAN[1] * (INTEREST[1]/12/100)*Power((1+INTEREST[1]/12/100), PAYMENTS[1])/(Power((1+INTEREST[1]/12/100),PAYMENTS[1])-1)), 2)
   ,INTERESTPMT[iteration_number+2]=round(balance[cv(p)-1]*interest[1]/1200, 2)
   ,PRINCIPALPMT[iteration_number+2]=paymentamt[cv()]-INTERESTPMT[cv()]
   ,balance[iteration_number+2]=balance[cv()-1]-PRINCIPALPMT[cv()]
  )
  
  CUSTOMER     P     LOAN     PAYMENTS     INTEREST     PAYMENTAMT     INTERESTPMT     PRINCIPALPMT     BALANCE
  Smith     1     131828.81     72     3.348     0     0     0     131828.81
  Smith     2     131828.81     1     3.348     2023.55     367.8     1655.75     130173.06
  Smith     3     131828.81     2     3.348     2023.55     363.18     1660.37     128512.69
  Smith     4     131828.81     3     3.348     2023.55     358.55     1665     126847.69
  Smith     5     131828.81     4     3.348     2023.55     353.91     1669.64     125178.05
  Smith     6     131828.81     5     3.348     2023.55     349.25     1674.3     123503.75
  Smith     7     131828.81     6     3.348     2023.55     344.58     1678.97     121824.78
  Smith     8     131828.81     7     3.348     2023.55     339.89     1683.66     120141.12
  Smith     9     131828.81     8     3.348     2023.55     335.19     1688.36     118452.76
  Smith     10     131828.81     9     3.348     2023.55     330.48     1693.07     116759.69
  Smith     11     131828.81     10     3.348     2023.55     325.76     1697.79     115061.9
  Smith     12     131828.81     11     3.348     2023.55     321.02     1702.53     113359.37
  Smith     13     131828.81     12     3.348     2023.55     316.27     1707.28     111652.09
  Smith     14     131828.81     13     3.348     2023.55     311.51     1712.04     109940.05
  ....
  

• try to synchronize the ipad pro with my laptop

  my laptop is unable to sync my ipod pro, saying I need to download the latest version of itunes, which I have any solution for this? Thank you

  Your mobile phone is Mac or PC?

  First of all, you can try to force your iPad to restart. Press the sleep and home for 20-30 seconds. When you see the silver Apple, let go and let it restart and try again.

  You can also try another USB port

  If it's a PC sometimes not updated drivers when you update iTunes and you have to convince your computer that you have updated a little. How I do it's too go into Control Panel, add/remove programs. Uninstall iTunes, Apple Mobile Device Service, Apple Application Support. Then redownload and reinstall iTunes and try again.

  If you are on a Mac then I don't think that will help you to the part of add/remove programs. But restarting different strength and a port could.