synchronize the clips?

Similar Questions

• Missing the clip markers (not really, but they might as well be...) solutions? thoughts?

  What a pleasure! Adobe has a new neat way to put the clip markers where I need! (NOT!!!)

  The old clip markers are a thing of the past... SO, how can I work with this client? I made videos of his show at the NY Fringe Festival. Five shows, two casts. Instead of an orchestra or piano, he used an electronic track very carefully designed and registered. OPPORTUNITY! I can take the videos I did with my camera AVCHD (high-end consumers Sony model), slightly change my priority of video for a second (and third) performance with a cast (getting more close-ups of principles in a shootout, for example, and in one case I had a third to shoot what I missed or could add) , and if I have the line to the top of the electronc track I have a fake near-perfect «two cameras shoot» Singers sing in real time, but lip sync problems are surprisingly minimal, especially when you use the audio of the video of closing-priority.

  The problem: how to get the titles lined up on a specific image? The old method of the application of clip to the timeline markers is GONE. Working with Adobe technical support that I find the NEW way to add them by double-clicking the element that makes them appear in the Source monitor Panel. Here, by pressing "M" will add new markers throughout the day. In fact, the markers are added to the element level so that anywhere in the project, this clip is present the marker appear mainly (rather useless or annoying or particularly debilitating). The old clip markers added to the level of the timeline would be present only (with a fixed number - is there some numbers more) in the scenario where the marker was added; the lining to the top of the clips being the main use of clip markers, which made a lot of sense...

  SOOO... What is the problem? I have my workaround, right? BAD! Try the synchronization does not occur the playheads between timeline and source... Use 'GANG source and program'... they move in tandem, but they do not synchronize, so no go. He must be a marker in the source monitor, notice where it landed on the timeline, and take it (in the source monitor, you can not move the markers on the timeline) and move it until it falls on the playhead on timeline. Does anyone have a better way to synchronize the clips? I do not have timecode (could be possible with the workflow Adobe-suggested... but I have SERIOUS problems with that...) so I need to score and synchronize clips. I feel that something good has been taken away. I don't know that the thief thinks that he has done you a favor and give me a great new way to make... it is what, say pray?

  Try the playheads between the timeline and the source of synchronization.

  In the case of the sequence, target the track clip is on, so instead of double-click to open it in the Source monitor, press the F key.

  I feel that something good has been taken away.

  It has been.  Please let them know.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  Finally, there is a keyboard shortcut to add element marks while in the order, it is not defined by default.  But you can go in the keyboard shortcuts and the search for orders of the element brand and create one yourself.

• Clip disappears when you synchronize the audio feature, Bug or am I doing wrong?

  Im trying to sync a bunch of images together and have questions. in general try to synchronize two angles of camera (both with scratch audio) and two stereo audio channels of the lessee of his (total 4 audio tracks)

  
  When I use the function synchronize on first General CC three results.

  1. it works perfectly, and I rejoice!

  2. it does not work as one of the clips is not enough audio info to work with

  3. it works, but any or all video tracks (and audio partner Strath) disappears.

  This video which disappear, it is which I'm bugged by? I'm doing something wrong or is this a bug? If someone else found this?

  generally have tracks like this when you select all (entry incase it is part of the question)

  VIDEO1

  VIDEO2

  Linkedscratchaudio1

  Linkedscratchaudio2

  recordedaudio1

  recordedaudio2

  recordedaudio3

  recordedaudio4

  any help?

  OK, someone change this answer. I see some good info but no solution. Here's how to fix it, and never have a problem. Just select the original audio and video and right click. untie the success. Now select just the audio old and new and synchronize them (make sure that the video is not selected). It works for me when this happens. I hope that helps... Change my friends

• Napster did break with the Clip +?

  My Clip + today reminded me that I need to connect it to Napster to renew my songs.  So I did the same thing I have been doing for years - connect my Clip + to my laptop, open Napster PC software on my laptop, then the synchronization and the Clip and Napster away into the sunset, hand in hand, until its time to do it again.

  But this time, the Napster software simply refuses to acknowledge that my Clip + is connected.  Napster has ghosts on us?  I sent to Napster to ask the same thing, but I thought someone here might have some info while I wait to hear back.

  If Napster has indeed turned the back on mp3 players, what is a girl to do to its subscription-music mp3 needs?  I'll have to appeal to a lousy speakeasy-like service lane metro mp3 music to get my fix?  Or I need to find a 12 step mp3 music program?

  I've heard of Napster people.

  This is a update of Windows 10 anniversary issue - the latest deleted version in favor WMDRM.  Napster working on a Windows 10 application that will download and playback in offline mode, but no ETA on when it will be available.

  Here is the complete answer to Napster.

  ================================

  Please note that customers who have installed the update of Windows 10 anniversary on their PC won't be able to use the Mp3 player or downloaded songs. Since windows 10 tracks birthday update (recent version) which has removed support for WMDRM. This is the reason for the question. Napster songs are songs WMDRM protected.

  Some of our customers already reported this problem. Microsoft has removed the DRM, and we can't put it back.

  We are working on a Windows 10 application that allows instead of downloading and reading offline.

  In the meantime, to solve this problem, we recommend that you do not to proceed with this update of Windows 10 anniversary.

  If you have already installed the update Windows 10 anniversary, then uninstall the steps are given below:

  Select settings > update and security > recovery and select the option to Go back.

  You can get detailed information on the issue of the article below:

  https://help.Napster.com/HC/en-us/articles/224373367-cannot-download-play-offline-or-use-MP3-players...

  Alternatively, you can follow the instructions in this article to uninstall the update of the anniversary of Windows:

  http://www.thewindowsclub.com/uninstall-Windows-10-anniversary-update

  Once you have returned to version of windows operating system, you will be able to use your device.

• Option + drag replace the clip with the changes in the sequence to THE point.

  I tried something recently that I was sure was going to work, but the results were completely unexpected.

  I have a source element in my calendar, which is still audio built-in camera. I wanted to replace this synchronized audio clip and rather than manipulate the content outside the first source.

  What I did was to drop this item in a new sequence. Adding synchronization audio off camera and filled then the content so that the sequnece exactly aligned with the original source clip. I also changed the time code of the departure for the sequence to match the original source.

  Looking at the metadata in the project Source Panel, they are completely identical in the measure of time, time code, etc...

  I chose this new sequence in the project Source, Opt-dragged on the clip Panel I wanted to replace, and then the sequence did replace the clip for the appropriate duration, the 'in' and 'out' points do not get adjusted as well. So, I had a totally different role of the clip, not the cut piece.

  It is possible that I had expectations for this evil, but what leads me to believe it would work is that you can do the same thing in AE, with clips and comps and it works perfectly every time.

  Thoughts?

  It is possible that I had expectations for this evil?

  N °

  Thoughts?

  If Alt / Opt + click - move doesn't work, try Alt / Opt + shift + click - move. Should work fine.

  If you used this in AE all the time, you would certainly annoyed that he does not work the same way in the first

  Looks like the PrPro team has been obsessed with the Nice defectors from FCP for the past two years, rather than transform organic whole Adobe Suite...

• Easy way to synchronize the audio left and right, from different sources?

  I mainly filmed concerts of a single camera using a Sony Z1 - when they are available, I'll take a sound card feeds channel 1, and a live auditorium feed a microphone mono channel 2. Because of the distance of the scene (and light is faster than sound, etc.), the power of the sound card is synchronized with the video and power of the auditorium is between 1 and 3 frames behind. Is there an easy way for me to take the tray clips together and just move this auditorium feed back in sync with the video and sound card feed, raw clips?

  Previously, I did this by dropping the clips to the timeline, done to separate tracks, sliding manually sync on the auditorium that feed by the required number of frames and link everything back up again. Synchronize audio visually using the waveform display (before first CC).

  I have two problems with this in Adobe first CC. First, the audio waveforms are not like waveforms more (and it doesn't seem to be possible to change the display to the old way?). So now that I am syncing the auditorium that feed in sound only, because I don't see anything on the screen to sync any more - both channels just look like random noise (or almost).

  Secondly, I film some events of multi camera, and of course, I'd like to be able to use the new functionality of synchronization for the multicam. But I know in advance that the audio channels on all the clips are not synchronized with the video (the camera powered by the sound card will be synchronized, the camera takes live food out as indicated above). Surely, there must be a way where I can fix the sync audio to video on raw clips first, before you say Adobe to synchronize based on the audio clips? Otherwise it will all be misaligned and require adjustment of the manual sync anyway? Again, what I've done previously is set of benchmarks on the identical frames, multi camera sync (so the video is now just good) and then manually set the audio synchronization before editing.

  In the context menu for the timeline, you can uncheck rectified of Audio waveforms for their return to normal.  (I wish that Adobe does not have this as default.  It's just weird.)

  But to synchronize, you can only do in the order.

• Synchronize the iPhone with pictures of Mac pictures

  Hi everyone, first post

  So my situation is I want to synchronize my Mac and my iPhone in such a way so that when I delete a photo of Photos from my Mac, he or she gets removed from my iPhone and visa versa - but there is a problem.

  I synced photos from my iPhone to my Mac in iTunes, hoping it would synchronize the actions so that I would be able to sort my content on my Mac and have everything what I remove synced to my phone, so it is deleted from there too. Unfortunately, which ended by happens is that many pictures on my phone have been reproduced and now I basically have 2 half of all my photos, a version which I am not able to remove. I can't simply delete the half that's disposable, because not all of them have been reproduced. I'm a little puzzled.

  So my question to you all is how to sync Photos to my phone with pictures of my Mac so that when a picture is deleted one, it is also deleted the other?

  Thank you!

  In addition, Mac running macOS Sierra and the iPhone is running iOS 10

  This using the library to iCloud. For questions about the Photos.app and the iCloud library find the Photos for Mac forum, here:

  Photos for Mac

• Can I synchronize the activity of health between two watches from Apple?

  I have two Apple - one for work, one for out watches. If I change watches in the middle of the day, the follow-up of the first watch of activity is not synchronized with the second watch. Is it possible to enable this so that the follow-up activity is specific for the whole day?

  Thank you!

  N ° it is not possible to synchronize the activity of health between two watches from Apple.

• How can I add a transition without eating in the length of the clip.

  I have a newer iMac with iMovie 10.1.2 and OS 10.11.6.  I would like to add transitions, but they eat in the length of each side of the transition of 2.0 seconds.  Is it possible to add transitions without eating in the length of the clip.  In old iMac with the internal CD, before Apple "upgraded" iMovie, you could add transitions without affecting the duration of the clip.  When a large part of my project, composed of clips 6-8 seconds of time, waive the duration of the clip to make a presentation more chic does not seem an option.

  For a transition to build to use incoming and outgoing clip media. We call these handles. It has always been like that. Most people leave a few seconds out of their clips when adding to the timeline. With clips you just save a second at each end, and you can create a second 1 transition or the precision Editor to set the duration of the transition. A point to note is that this does not apply to photos that they automatically of the handles. Your transition that uses 2 seconds of your clips is a second transition 2. If you use the full clip in the timeline and add a transition, iMovie will warn you that it would take the clips to make the transition.

• iMovie 10.1.2 adjust the size of the clip in the timeline

  When I move a clip in the timeline, the size is reduced to a point where I can't move titles correctly.  I tried the setting of the slider, but it does not affect the components of the package.

  Hi, David,.

  You use the scroll bar that you get when you click the gear in the top middle of your screen.  This bar only works on clips in the clips pane, not in the time line.

  The slider beside the button settings in the middle right side of your screen expands the time line so that the clips in it are spread out more.

  Also, if you click on the settings button, a dialog box appears that contains a scroll bar to adjust the size of the clip in the timeline.

  Hope this helps,

  -Rich

• Have the phone Nokia 635, to synchronize the pc with Firefox. Why can I not? Poor show if not compatible must be a way, surely?

  Very new to Firefox - but like her. Have 635 Nokia phone and I thought would be easy to synchronize the two, but apparently, they are not compatible?
  Is it possible to sync - I am a novice to this simple of terms please! Thks

  HI Evie.
  What version of FIrefox OS is on the Nokia 635? If Firefox OS isn't on this phone, and it runs Windows, so it is true that the device doesn't support Firefox for mobile. (Currently there is development of Firefox for Android and IOS)

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• I have a video clip taken with a Go Pro.  The clip is upside.  Is it possible in Photos to reverse that?

  I have a video clip taken with a Go Pro.  The camera was upside down when the clip was taken.  I imported it in Photos, and now he is always upside down.  Is it possible to return the clip?

  Not with pictures - you can I think iMovie or QuickTime - export video back in the ouside software and then re-import

  LN

• I have can´t select part of the clips in iMovie...

  Hi guys

  I m now using iMovie to edit a new project.

  There is a low, I used iMovie without problems.

  Today to import my video iPhone and try to select in the project, which is part of the clip, but automatically select the entire clip... In other works, simply place the mouse on the clip and drag to complete... Why not now?

  

  It's a feature, not a bug, that you can't drag a portion of a clip to the timeline. Hold down the R button to select a part of an element to be used in the film.  Otherwise, you will always add the full clip.

  See notes to iMovie version 10.1.2:

  

• I'm trying to move a song to my iPhone music library to the iTunes library on my MacBook Air.  I do not want to synchronize the two, so how do I simply copy/migrate the song on my computer?

  I'm trying to move a song to my iPhone music library to the iTunes library on my MacBook Air.  I do not want to synchronize the two (and they have never been synchronized), so how can I simply copy/migrate the song on my computer?  Is there a way to do, without having to re-purchase the song on the iTunes Store on my Mac?

  E-mail (for yourself) click on it in the email