Synchronize the video and data - Version tiara?

What version of DIAdem is required to synchronize playback video and data?  Can I synchronize two videos at the same time with a data source, or does have a video with a data source?

You need the DIAdem Advanced Edition

Greetings

Walter

Tags: NI Software

Similar Questions

  • synchronize the inputs and outputs on the USB-4431

    Hello

    I have an application that needs to send a signal on the USB-4431 and then capture it with an entry on the same device.

    Aware that I use two tasks to do this, one for input and one for output. I discovered that a trigger (on the RTSI bus) can cycles of sending/capture sychronisé departure operations so that it can be a constant offset between the captured signal and the output signal.

    Unfortunately, the code I found is for Matlab. I can't find an equivalent for it in the C API of NIdaq. The method is described here; http://www.mathworks.in/help/daq/synchronize-analog-input-and-output-using-rtsi.html.

    What I can't understand is how to implement this on the analog input:

    ai.ExternalTriggerDriveLine = 'RTSI0';
    

    Can someone shed light on how to do it?

    The rest of the things described here, seems to be feasible with a normal trigger:

    ao.TriggerType = 'HwDigital';
    ao.HwDigitalTriggerSource = 'RTSI0';
    ao.TriggerCondition = 'PositiveEdge';
    

    Thank you

    Nirvtek

    You can synchronize the HAVE and AO by sharing the start of relaxation between your two tasks.

    Choose one of your tasks as the "master" and the other to be the "slave" (any).

    Set up a trigger to start of digital dashboard on the task of the slave, and set the source of the trigger to be the trigger of the master's departure.

    Assume the following:

    The name of your device is 'Dev1 '.

    I is the main task

    AO is the task of the slave

    Here's what you would do to sync the two:

    (1) create the tasks I and AO in order that you want to

    (2) set up "timing" on the tasks of HAVE it and AO (you choose the sampling rates must be the same or power-of-2 many of the other (for example 100 K, 50 K, 25 K, 12.5 K, etc...))

    (3) configure your slave (the task of AO) task to have a numerical advantage start trigger and make the source is the trigger for the start of the task of the master (the task to HAVE it). In our case, "Dev1, AI, StartTrigger.

    (4) write data (a sine wave, presumably) to your task AO

    (5) start the task from the slave (the task of AO).  The task of the AO is now in the 'Started' State, but given that you've set up a digital trigger early, it won't actually generate data until he sees a numerical advantage of 'Dev1, AI, StartTrigger.

    (6) to start the main task (task to HAVE it).  The task of the AI does not have a trigger digital early, so the software will immediately generate a start trigger, which also causes a numerical advantage on "StartTrigger/AI/Dev1", which causes the task AO start at the same time.

    7) read your job to HAVE.

    You will notice a few 0 at the beginning of your data to HAVE. It's a result of something called "Filter Delay" and it is an inherent characteristic of all DSA devices - see the manual to use DSA and this article for more information on what is and how to cope.

    I hope this helps.

    EDIT: I just noticed that you pointed out an existing C example. It's exactly what you want. I don't know why you have a resource error booked - I tried it myself and (after changing the AO will of +/-10V to +/-3 .5V), it works beautifully.  Try to reset your device to the MAX (or DAQmxResetDevice() of your program)

  • How to change the time and date on the desktop?

    My computer does not show the time and date.

    I tried several times to update the date and time, but after the judgment the same problem persists.
    How to solve the problem?

    Mr. Thanapackiam I know that this issue please follow my steps

    Step 1:-go to the Start Menu and Type "region and language" and press enter
    Step 2:-go to the location tab and select your current location
    Step 3:-go to the Start Menu and Type "Services" and press ENTER. (i.e. open Services)
    Make sure that the Windows time service is running.
    Step 4:-click Date and time on the far right of the taskbar.                           Click Change Date and time settings.
    Step 5:-click Change Date and time settings button to change the date and time
    Step 6:-Click Internet Time to synchronize the time with the Server online
    Step 7:-   click on change settings , then update now

    Thank you
  • 8.5.1 LabVIEW Student Edition - differences between the Mac and Windows versions?

    Hello

    I just bought the student of LabVIEW 8.5.1 version and I use Mac OS X 10.4.11. What are the biggest differences between the Mac and Windows versions, since the box came with a CD of installation of Mac and a Windows DVD Installer?

    See you soon

    Looks like you got the LabVIEW Student Edition Software Suite DVD.

    It comes with 6 boxes to tools, and the TME product, some (or all?) of those who are windows only (at least 8.5), for example:

    • Toolkit Digital Filter Design
    • Modulation Toolkit
    • SignalExpress
    • ...

    Since you have 8.5, you are missing also a few basic things that only recevied at the 8.6MAC support, like Mathscript, Control design and Simulation and native 3D graphics.

  • Whenever I have turn off my pc and reboot later, the time and date go to 0.00

    Original title : improve system performance slow slow start

    Whenever I have turn off my pc and reboot later, the time and date go to 0.00

    Probably means the ROM BIOS chip gone bad and must be replaced. Its a small coin like chip located on your motherboard. You should be able to buy one on where one sells computers and electronic products.

    How to replace the BIOS chip on a motherboard . eHow.com

  • After you configure the video and music on Windows Movie Maker 2.6 screen goes black

    The Windows Movie Maker 2.6, I have my video and audio set up and perfect. But when the video and music that is made, the game screen turns black and theres no video and audio on. HELPP PLEAAASEEE! It is a House project which was awarded only to me yesterday. tomorrow, it is due.

    Hello

    (a) we would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

    (b) what operating system do you use?

    (c) what is the length of the film?

    (d) what is the original file of the film format (.avi, etc.)?

    The issue could be caused by audio and video filters. Please see the link below.

    Video filters in Windows Movie Maker: frequently asked questions:

    http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  • Pics of the processor to 100%. Especially watch the video and You Tube

    Original title: Windows updates.

    Hello

    Serious PC recently suffered delays a few days after a format and fresh install, CPU spikes at 100%. Especially watch the video and You Tube, but also a few internet broswering. No maleware, spyware or virus. Went through various things to solve the problem without success.

    Then I did a format and a new facility. At this point, the only difference with the previous install I've not updated the PC via windows update and the problem disappeared.

    Obviously for security updates are required, but there are about 130 updates installed. Is there a way to identify the update was the cause of the problem without having to install an update at a time. What updates are most important.

    Hi Niel,

    Process Explorer shows the real CPU usage based on the number of cycles. If you speed or other limitation of frequency active CPU that will work consumes a number of cycles to be calculated as a percentage of available cycles per second.

    The Process Explorer display consists of two panes.

    The top window always shows a list of active processes, including the names of their owners accounts, whereas the information displayed in the bottom window depends on the mode that Process Explorer is in.

    Try the following steps, who worked for many users:

    1. Try turning off the lower pane of the process explore.
    2. Go to the sleeves of another process in the lower pane.
    3. Change the frequency of at least 1 second.

    Thank you

    Waseemulla S

  • Clock-calendar does not maintain the time and date

    The clock-calendar on my laptop does not maintain the time and date after I put it.

    Usually a sign that the bios cmos battery is defective and must be replaced

  • Windows Movie Maker-how to match the length of the video and audio

    Windows Movie Maker

    Hi, I've used Windows Movie Maker 6.0 and windows vista.  I do a sort of slide show with pictures and music.  How to match the duration of the video to audio.  Right now my audio file is longer than my video.

    Hi, I've used Windows Movie Maker 6.0 and windows vista.  I do a sort of slide show with pictures and music.  How to match the duration of the video to audio.  Right now my audio file is longer than my video.

    =============================================
    Have you tried to split the Audio file (Ctrl + L) at the end of the video
    and then right-click / Delete the unwanted part?

    Or... to increase the duration of the photos. If you place the cursor on the edge
    a photo on the timeline, you'll see a red double arrow... you can
    Drag the arrow to change the duration. A ToolTip should appear to show
    change.

    BTW... Photo Story 3 is a good software to make video slideshows.

    PhotoStory 3 for Windows
    http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx
    (works on XP, Vista and Win7)

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • How can I reset the time and date on Windows Vista?

    How can I reset the time and date on Windows Vista

    http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html

    http://www.Vistax64.com/tutorials/114989-date-time-change.html

    Read the information in one of the links above.

    See you soon.

    Mick Murphy - Microsoft partner

  • can anyone help me find an app for the Zeen which has just the time and date? Don't want to google.

    I don't know how to use the apps since all I found is on android, but apparently the Zeen is not compatible with the android apps.  I have google calendar, but it doesn't work and want to only the time and date is displayed.  I followed all the directions for adding applications, but they do not work or I can't understand them.

    Salvation of theeagles,

    The Zeen is unable to access the Android Market, but it's an Android device.  There is a market for this called SlideME, and you should have the icon for it in your apps section.  I have a station also, and I'm just a normal clock on mine.

    Here is a link to SlideME, if you want to see what applications are available: http://slideme.org/

  • How to set the time and date on printer n911a e-all-in-one officejet pro 8600.

    How do you set the time and date on printer n911a e-all-in-one officejet pro 8600. This info is not in the user's guide or the getting started guide.    Thanks in advance. Jim

    Jim go to settings on the 8600, click Preferences.

    There is an option DATE and HOUR.

  • ETA App should help to get the time and date feature HELP!

    Hi everyone, I'm doing an application where I need to get the time and date of the antone device can help, I know there is a function such as getDate or getTime but im not to know how to use it.

    As far as I know,

    I use this to get the time system (it returns long type)

    System.currentTimeMillis();
    

    After that, you can use SimpleDateFormat to convert date and time

    SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy, HH:mm");
    String time = sdf.format(new Date(System.currentTimeMilis()));
    
  • Trouble with the voice and data Vlan vlan translate between CT3905 and SF300 - 24 p

    Hey actually, we have the solution to monitoring of implementation with CT3905 phone, SF300 - switches 24 p cameras and AIR-AP1041N Access Points

    We have the problem with the vlan tag in SF300 switch ports - 24 p we can´t tag vlan of the voice and data VLANs on the same port on SF300 - 24 p it is Possible or we must dedicate a port for each VLAN or ussing the same data segment of VLANs and vlan voice?

    Someone has an answer or technical documentation that can help us

    Best regards

    First of all,

    Please disable lldp transmit in SF 300 switch.

    The command is "no lldp transmitted."

    After you disable check the following steps.

    https://supportforums.Cisco.com/docs/doc-27005

    facing the same problem with cisco SG 300 and 3905 ip phone switch.

    And nested thing was my 7945 and 6941 phones use to work properly, without above configuration.

    Cisco 3905 became not vlan Ip address votes and even if I put static, it did not work.

    After a long struggle, I was able to solve the problem. Now both phone and system work fine in the same port.

    Samantha

  • problem with the clock and date

    I need to change the time and date when I started windows. so, what's the problem?

    It could be the button for the CMOS battery.

    A low CMOS battery can sometimes various issues, including slow, locking unexplained performance issues as well as others.

    It is quite rare, but the battery is relatively easy to replace, check the manual of your computer/motherboard for replacement details.

    Generally, the battery is a watch battery "CR2032", about the size of a nickel.

    `~`

    The current time and the date now in Baja California, Mexico

    07:36
    Friday, may 3, 2013
    DST - 0700 UTC
     
    UTC/GMT is 14:36 Friday, may 3, 2013
                
    Current weather conditions in San Felipe

    Sunny29 ° C / 85 ° F

Maybe you are looking for

  • PhotoImpression 5

    I get the message "Photoimpression has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "It works very well and no solution now is coming. I have

  • Satellite U400-138: how to activate Bluetooth in Ubuntu device

    I have a new Toshiba Satellite U400-138.This is the version of Centrino with Intel GMA4500HD graphics card and Intel 5100 a/g/n wireless. If I understand correctly, the Bluetooth adapter is * turned off by default * and a special * command ACPI * is

  • I need drivers for Mini PCI PA3212U-1MPC wireless card

    Hi, I bought a second hand wireless card for my toshiba satellite 1410 902. Unfortunately, the person who sold me the card has not found the CD with the drivers in it.I downloaded a driver from toshiba support site, but it did not work. My computer r

  • Acquisition continues two sensors LVDT

    I'm trying to build a program to monitor the two LVDT sensors inside a table of machining to measure vibrations. I wish I could acquire as close as possible continuous. I'm looking for small delays because the plan is to have a feedback mechanism lat

  • my internet explore opens with conduit. How do I get this back to IE

    Why the duct rises in the browser instead of Internet Explorer