System 5 using MySQL error

Similar Questions

• Qosmio X 300 - this system cannot use Toshiba Accessibility

  I managed to install all Qosmio X 300 drivers on Windows 7 64 bit. Everything works fine except this one: 'Toshiba Accessibility. When I click on a button of 'Access', I get this error message:

  "This system cannot use Toshiba Accessibility"

  I get this and what is this feature?

  Hello

  I agree with the user above. I think you didn't install Toshiba Value Package added but it is necessary to other tools to operate. You can download it on the Toshiba site so take a look at it again.

  Check this box!

• System fan 90 b error

  After 3 days because the computer and let me say that in three days I have not too much used, this error is out. So I tried to turn on the PC several times and even came out, after a few times the PC just started with windows loading upward logo, now, it seems that the problem is solved, but I ' m afraid this can appear at any time. Right now the PC works well, but after reading all the posts I'm starting to feel a little disappointed by this machine, what a shame, everyone thinks that HP is a good brand, but they are nothing more than a mask.

  Hello

  Fan

  Fan does not properly

  90 B

  The system fan may be faulty. For more information on troubleshooting heat related problems, see the fan runs continuously, the PC working slow than expected and generates the heat . It is also recommended that you perform a hard reset, because that can sometimes restore the system to the operating state fan. For more information, see reset and use, to solve software problems . If the system fan continues to fail, contact HP support.

• non system disk or disk error, windows 98

  I have the chromatograph with P IV system with windows 98. He began to display non-system disk or disk error. Please help and guide me if this hard disk can be used in the version of windows before this error. Because the software of the GC settings that windows and we have no backup. Also tell me if the hard drive partitions can be recovered after formatting and it can be restored to the operating system before the error.

  answer me on this email ID. E-mail address is removed from the privacy *.
  Kind regards

  Zafar Iqbal,

  Faisalabad.

  Support for Windows 98 ended on July 11, 2006.

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• I can't recover my system (DV6000) using recovery discs after replacing the card mother/HARD drive

  I have a DV6408nr (windows vista Home premium) I had to replace the motherboard and hard drive. When installing the new motherboard (same part No.: 443775-001) and insert the recovery (bought from HP) discs that I have, I received an error message stating that the PC could not be recovered using my disks. The serial numbers on the label service and in my bios do not match. When I entered the serial number of my bios in HPpartsurfer, he said that the system is a DV6449us. I already checked my RAM and HARD drive is brand new/not formatted. I used these recovery discs (manufacturer: 483905-003/483906-003) successfully before on other flags of DV series. Is there a reason why these discs should not work on two motherboards in the same system with these similar specs? What should I do to get my system recovered?

  The number of the motherboard and other show information in the bios of the new Commission?

  The numbers do not match the recovery disks or information is missing in the bios.

  If it's really a mismatch, then you will need to find the good recovery disks or use a Dell installation disk operating system and use the product key from the sticker on the laptop to get activated, and then manually install the drivers.

  If the bios tattoo is damaged or missing information only a used HP Center can then fix the tattoo.

  check your private messages

• [Help] Replace the MySQL error message

  In the form of the insert, I want to put a special, instead of mysql_error error message

  Here is an example:

  If ((isset($_POST["MM_insert"])) & & ($_POST ["MM_insert"] == "insert_form")) {}
  $insertSQL = sprintf ("INSERT INTO stuff (title, number) VALUES (%s, %s)," ")
  GetSQLValueString ($_POST ['titla'], "text").
  GetSQLValueString ($_POST ['numbers'], "int"));

  @mysql_select_db ($database_connection, $connection);
  $Result1 = mysql_query ($insertSQL, $connection) or die (mysql_error ());

  cause I get an error like cannot be null

  Thank you.

  [Subject line edited by moderator to make it more explicit]

  If you want to replace the MySQL error message, you can put your own error in quotes in the die() command. Change this:

  $Result1 = mysql_query($insertSQL, $connection) or die(mysql_error());
  

  to do this:

  $Result1 = mysql_query($insertSQL, $connection) or die('Database error');
  

  However, it is not very useful for a user, because all that appears is "Database error" with no indication of what caused the error or sort of a return to the page, except using the browser back button.

  A better way of handling things is to remove the or of the article die (mysql_error ()) code altogether and replace it with a PHP conditional statement that returns the user to an error page if the SQL code fails for some reason any. However, these changes will prevent you to make other changes to the server through the server behaviors panel behavior.

  $Result1 = mysql_query($insertSQL, $connection);
  
  if (!$Result1) {
    $insertGoTo = 'error.php';
  } else {
    $insertGoTo = 'another_page.php' // <-- this is the original $insertGoTo line
  }
  

• CFScript to create tables (using MySQL) and configure it to use InnoDB

  I use a cfscript to create my database and the tables using MySQL, and I was able to DO this with success, accept that I'm having a problem. I want to put my tables use InnoDB instead of MyISAM. How to do this?
  
  That's what I did:
  
  < cfquery = 'test' datasource name = 'mydatasource' >
  CREATE TABLE Test
  (
  Id int (11) NOT NULL auto_increment,
  Name varchar (20) default NULL,
  Tinyint (4) active default NULL,
  PRIMARY KEY (Id)
  ); ENGINE = InnoDB DEFAULT CHARSET = latin;
  < / cfquery >
  
  But when I get an error when I run this script. That's what I get:
  
  -You have an error in your SQL syntax; "check the manual for your version of the MySQL server for the right syntax to use near '; ENGINE = InnoDB DEFAULT CHARSET = latin1'.
  
  I look and it's the right syntax. Any ideas what I am doing wrong?
  
  Thanks for any help
  
  Alfie

  Nevermind, I figured it. I misspelled it.

  ENGINE type = InnoDB... must be before the semicolon.

  :)

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• We will not burn SN-S082H CD player using iTunes - error 2131

  Hello

  I just bought a laptop PC Nextday with the SN-S082H command that will not burn CD using Itunes - error 2131 (I think from memory).

  Could someone let me know the solution to this?

  Thank you, Rob.

  I think that this error due to consistent problems.
  I read in some articles of the computer that the iTunes software is not fully compatible with different CD/DVD drives firmware.

• What operating system I use for iPhone 4?

  What operating system I use for iPhone 4? It will work with OS 9?

  7.1.2 No. is as high as possible.

• system restore an unspecified error occurred during restore of the system... why it can not restore for me?

  I tried to restore my system 3 times because something is wrong and I wanted to get back to normal... but it keeps saying

  Hi, Doris.

  An analysis of the system by using the System File Checker

  Start > type CMD

  If you are using Windows Vista and Windows 7, right click on the CMD window and select run as administrator

  If you use Windows XP, press ENTER to open the command prompt window

  Type SFC/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228.------

  If it is missing or damaged you will be asked for your Windows Recovery CD/DVD files so please with it.

  You can also view the solutions proposed in these discussions:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/i-am-unable-to-perform-a-system-restore-how-do-i/d80e54ae-2829-4270-B032-455d017172b4

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-do-a-system-restore/1ef52b3f-ff34-461D-9813-a95d341e2afd

• Whenever I have shut down my system, I get an error of "nlsphelp.exe".

  Original title: nlsphelp.exe

  Whenever I have shut down my system, I get an error box "nlsphelp.exe". What can be done to fix this?

  See you soon

  The nlsphelp.exe has nothing to do with a virus.

  It's the NetLib SQL Service Helper Service (not found on a general XP installation).

  Now you or you already had versions of SQL Server installed on your system of unspecified of brand and model with the unspecified XP version and Service Pack?

  If not, it may belong to a third-party application you have installed or it might be some something remains either of something that you have uninstalled before this incident.

  If you are not sure whether you need it or not, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet and locate the assistance of NetLib SQL Service Pack Service, right click, properties and after making a note of the current startup type, set the startup type to "Disabled", reboot, run for a while and see how things work without it.

  If you find things that don't work without it running, set the startup type to what it was before and pick up another idea.

  Is it your desire, you can also delete the Service completely so that you will never see it again.

• After the repair system now get Validation error

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: blocked VLK
  Validation code: 3
  Code of Validation caching: n/a
  Windows product key: *-* - 3R89F - D2KXW-VPK3J
  Windows product key hash: Ro / Y7HENE9CfW7lW + QtlNbYQEE8 =
  Windows product ID: 76487-640-8365391-23209
  Windows product ID type: 1
  Windows license type: Volume
  The Windows OS version: 5.1.2600.2.00010100.2.0.pro
  ID: {E1E586D7-D985-40D5-B72B-B417194240BE} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation Diagnostic: 025D1FF3-230-1
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Caching the result: 3
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1

  Data browser-->
  Proxy settings:
  User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {E1E586D7-D985-40D5-B72B-B417194240BE}1.9.0027.05.1.2600.2.00010100.2.0.prox 32*-*-*-*-VPK3JS-1-5-21-839522115-299502267-214717958776487-640-8365391-232091MICRO-STAR INTERNATIONAL CO., LTDMS-7313American Megatrends Inc.. V1.0 20080218000000.000000 + 000CC76347F0184E0780c 090409AUS Eastern Standard Time(GMT+10:00)03109    

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 13B7D: TRUE C & C INC
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  * original title - had repaired system and get validation error have an oem disk how cai I enter the appropriate key (repairman has closed the store) *.

  Hello

  It seems that the license Volume (VLK) key has been blocked. I suggest you to check the links below.

  http://social.Microsoft.com/forums/en/genuinewindowsxp/thread/cbb60c8c-0c83-4601-90b3-19a1c24cd6f6

  http://social.Microsoft.com/forums/en-us/genuineoffice/thread/6d13cbed-0e23-489F-a0f8-e4fef52659a9

  Apart from that, I suggest you to report your query in the TechNet forums to get help. Click on the link below.

  http://social.Microsoft.com/forums/en/genuinewindowsxp/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.