System analysis report error "service has an unexpected error code.

Similar Questions

• Unable to connect error headset/Bluetooth Headset: the pairing attempt failed in an unknown error, is the reported error code: 0x80070005

  Original title: Bluetooth headset not connecting

  I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)

  However, when pairing the headset I gives me the message
  "Device pairing failed.
  Matching attempt failed in an unknown error, is the reported error code: 0x80070005
  Contact the manufacturer of your device. »
  However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.
  Can someone tell me please how to fix this error?
  If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2 - is this compatible with your operating system device?

  First thing I suggest you to check the manual and if this device is compatible with your operating system.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: If the problem persists, then try to update driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Set up a Bluetooth device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Update for Windows 7 for x 64-based systems KB976264 80242014 error code

  Hello

  I use Windows 7 x 64 system. I have a problem with the "update for Windows 7 for x 64-based systems KB976264" 80242014 error code and the status "pending to be" appear next to him. I think that the update has been installed in part because whenever I'm turning off the computer there is a message "system is preparing for configuration" and when I turn the configuration but still start, it stops when it reaches 35 percent. The computer restarts and then there is another message that the configation was not successful and the changes are in return.

  I tried to install the update manually from the Windows Web page but there is always an error code that the update is not available for my computer, even if I download the version which should be compatible with it.

  Could you please tell me how to reinstall or uninstall the update not to be bothered by my computer restarts every time that I turn it on?

  Thank you

  Hanah,
  Take a look at this article and try the troubleshooting steps in this regard.  Let us know the results.  Also, check the update history and see if there are other error codes.

  You can also perform these troubleshooting beginning steps.
  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

  HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

  Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

  Sometimes spits out a blank sheet of paper.

  Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Can you please post back to let us know how you go?

  Thanks, Ciara

• Broken system health report; Error

  Error:

  An error occurred while trying to generate the report.

  _____________________________________

  Waiting for report generation tool finish has expired.

  I fixed that by removing manually report logs in the folder:

  C:\PerfLogs\System\Diagnostics

  Generate system health report tool every day for fun and I'm sure that the computer stops trying to save the reports.

• AVG Free anti-virus analysis reports errors potentially dangerous following rootkit

  AVG anti-virus free the following errors of potentially dangerous rootkit analysis reports - ' ";" C:\WINDOWS\system32\drivers\sppz.sys «;» ATAPI.sys, Hung import HAL.dll READ_PORT_USHORT-> sppz.sys + 0x20C0"; "' Object is hidden" ' ";" C:\WINDOWS\system32\drivers\sppz.sys «;» ATAPI.sys, Hung import HAL.dll WRITE_PORT_BUFFER_USHORT-> sppz.sys + 0x2800"; "' Object is hidden" ' ";" C:\WINDOWS\system32\drivers\sppz.sys «;» ATAPI.sys, Hung import HAL.dll WRITE_PORT_UCHAR-> sppz.sys + 0x26D6"; "' Object is hidden" ' ";" ' C:\WINDOWS\system32\drivers\sppz.sys ';' i8042prt.sys, Hung import HAL.dll READ_PORT_UCHAR-> sppz.sys + 0x11B90; "' Object is hidden.  Is this a false positive, or should I remove these rootkits?  If so, how?  These have been reported after that I installed the Windows updates on June 14, 2012.

  You need to scan with a program SPECIALLY designed to detect and remove rootkits (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm
  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.
  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

• Windows 7 backup system Image - 0x8078012D error Code - fails to complete system image backup?

  I seem to have a problem with the Windows backup when a scheduled backup image on a hard drive external fails to finish, although she worked successfully before many times.  Backup Windows reports an error code of 0x8078012D.

  I ran the tool of error checking on the external hard drive with running repair options, but no problem discovered.  The external disk drive seems ok because I use a Norton program to back up data on the same drive with no problems.  Also Windows backup will happily make a 'non-system image' backup on the external drive.

  But it is not an image of the system stand alone, or as an add on the a normal backup.

  Any advice?

  Thank you
  David

  After many tests on the solutions listed here, I found a way to fix my problem. I had continually failure is to say the system could not create a snapshot or that my drive has been a failure. It seems, with Windows 7, you must configure options that are not obvious to the users.

  1. go to control panel/system/System Protection and select your C: drive.

  2. Select "set up" and make sure "Restore system settings and previous versions of files" is on.

  3. the Max use value at least 2%

  4. apply

  5. Select your key USB you will use for backup and configure it again to the protection and the whole file size of at least 18%.

  6. apply

  7. in the control panel go to administrative tools, open Services.

  8 scroll down until Windows backup and make sure it is set to manual and not started.

  9. highlight Volume Shadow and make sure it is also set to manual and not started.

  10 10 aller go to control panel, select backup and restore.

  11. click on "Change settings", and then select the drive you will support up to.

  12 run backup let the system do its thing and everything should work.

• How can I get rid of the system DCOM 10005 error code?

  I will be working along and then I get the blue screen. In the event viewer it shows error code 10005 DCOM system and a computer error code of Service Control. This time, the # is 7026. They are different every time. But the DCOM # is always the same.

  Make sure that the Search Service is configured to start automatically in the Services Management Console (type Services.msc in the box run from the start menu).

  John

• can not backup files to restore the system to receive error code 0 x 80070005

  Original title: can not save the files in system restore

  > error message... a shadow copy could not be created (0x80070005).

  Hello

  Disable the security software and activation of Volume Shadow Copy and backup service can help in performing a backup.

  Check the steps suggested by Sandeep GNT from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Vista-Home-backup-0x80070005/4558119a-73d6-4C18-9a95-8ae484678586

  Good day!

  Answer please if you face concerns.

• HP Stream x 360 11-p010ca: System disabled 84478037 error code

  Hello

  I have a hp Stream x 360 11 - p010ca system disabled error code 84478037 appearing all trying to access my bios.

  How can I erase this?

  Thank you in advance.

  Hello

  Enter 31550019

  Kind regards

  DP - K

• I can't install Windows updates security for Microsoft Office System 2007: 646 error Code

  I can not install the following Windows updates:
  Update for Microsoft Office System 2007 security:

  Update of security for Microsoft Office Excel 2007 (KB982308)
  Update of security for Microsoft Office InfoPath 2007 (KB979441)
  Update of security for Microsoft Office PowerPoint 2007 (KB982158)
  Update of security for Microsoft Office Word 2007 (KB982135)
  Update of security for Microsoft Office System 2007 (KB982312)
  Update of security for Microsoft Office System 2007 (KB982331)

  I get the error code 646.  If someone could help me, I would appreciate it.

  Hello

  Here's what I recommend you do:

  1. disable UAC (do this if you are using Vista or Windows 7, otherwise, go to step # 2). Comes down

  restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow steps 3-4.
  7. If it still does not work, follow step # 3 again. After you download it, try unplugging your computer from

  Internet (unplug the internet cable or turn off the modem). Then, try to install the downloaded file

  (KB982331). It should work this time.

  Do the same for all the updates that come with KB982331, IF ANY.
  Let me know your results.

  WARNING: This is only a WORKAROUND and not a RESOLUTION. The resolution is displayed as soon as we have it.

• cannot update the system... error code 80070005 appears?

  have tried several times to automatic update window system, but windows cannot verify the updates and the aboe error code appears... also tried the fix online tool without success... of advice would be appreciated... thanx

  One of the most common causes of this error code is the Anti Virus and Anti Spyware software running on the computer.

  You can try to disable them, and then try the updates again. Keep the firewall however.

  Recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP Antivirus
  http://support.Microsoft.com/kb/822158

  How to reset security settings to default values
  http://support.Microsoft.com/kb/313222

• Financial reports: Error Code 255 when installing power supply 11.1.2.3.505

  Hello

  I ve tried to install the power supply 11.1.2.3.505 (19795686) for financial reporting.

  The command is:

  C:\Oracle\Middleware\EPMSystem11R1\OPatch > opatch.bat applies C:\Oracle\Middleware\

  EPMSystem11R1\OPatch\19795686-oh C:\Oracle\Middleware jdk - C:\Oracle\Middleware

  \jdk160_35

  But it stops with the following error message:

  OPatch failed to find inventory YES home of the Oracle based. But, location YES

  is provided through "oui_loc" option. Please check the inventory of the Oracle CDM

  e and OPatch execution again.

  OPatch failed with error code = 255

  Any ideas?

  Thank you!

  Hello

  You can download the latest version of OPatch of My Oracle Support (MOS)

  Reference: OPatch - where can I find the latest Version of OPatch? [Video] (Doc ID 224346.1)

  Kind regards

  Harish.

• Cannot create 0 system restore point error code 80070057 x

  Hello

  Please help me with this error:

  Today, when I do a manual create a system restore point, I received the following message "could not perform scheduled task for the following reason: parameter is incorrect." I do a sfc/scannow, but the process has frozen the audit of 100% and has not given any results. I have also uninstall the antivirus software and redo the creation but without success. Please let know me what I can do?

  Thank you

  Negis

  Hello

  Sorry for the late post. I don't try to back up or restore. I just want to create a restore point.

  Netherless, I followed the advice on this thread http://social.technet.microsoft.com/Forums/en/itprovistasecurity/thread/37160397-349e-4aa2-992e-1ffe58b5e51e and renamed the SR file in %windir%\System32\Tasks\Microsoft\Windows\SystemRestore to SR.sav and can create restore points successfully. So I create a restore point, a new SR file is created adjacent to the old (SR.sav)

  However, is it to let the SR.sav file remains in the folder or just delete it? Is it possible that renaming some files to offset it later?

  Please kindly answer. Thank you

  Negis

• Cannto run System Restore: 0x8000ffff error code

  Original title: error 0x8000ffff trouble code

  System Restore tried and couldn't make any changes due to the error 0x8000ffff, t please help-Bill

  Which antivirus product is installed? You will have problems if it is Norton!