System and security missing in Control Panel and also not able to decrypt the drive

Original title: System and security

i is not system and security link in my control panel and I want to decrypt the drive I encrypted earlier, what I do now, please help

Hello

To suspend BitLocker Drive encryption on a drive
a. Click Start, click Control Panel, click System and security and then click BitLocker Drive encryption.
b. click on suspend Protection for the reader.
c. a message appears, informing you that your data will not be protected by BitLocker is suspended and asking if you want to suspend BitLocker Drive encryption. Click Yes to continue and suspend BitLocker on the drive.
By performing this procedure, you have suspended BitLocker protection on the disk by changing the decryption for the BACKSPACE key key. To read data from the drive, the clear key is used to access the files. When BitLocker is suspended, secure the TPM validation does not place and other authentication methods, such as the use of a PIN or USB key to unlock the operating system drive, are not applied. This allows you to make changes such as upgrading system BIOS or replacing a data drive. When you have finished your changes to the computer, click RESUME Protection in the BitLocker Drive Encryption to start Control Panel item to use BitLocker Drive Encryption again.
To turn off BitLocker Drive encryption
a. Click Start, click Control Panel, click System and security and then click BitLocker Drive encryption.
b. find the drive on which you want BitLocker Drive Encryption is disabled and click enable disable BitLocker.
c. a message appears, informing you that the drive is decrypted, and this decryption may take a long time. Click on deciphering the drive to continue and turn off BitLocker on the drive.

More information: http://TechNet.Microsoft.com/en-us/library/ee424315 (WS.10) .aspx

I hope this helps.

Tags: Windows

Similar Questions

  • Wil Windows 7 does not start and is not able to solve the problem

    Hello

    I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

    When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

    I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
    At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

    Thank you

    > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

    This is a typical symptom for a faulty HARD drive.
    I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

    > At some point, the screen showed that there is a cable that is not connected or something.
    Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
    This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

    In my opinion, you need to change the HARD drive.
    I think this should solve the problem.

  • X 230-camera improved security missing in Control Panel option

    Hello

    Does anyone else have this problem of improved camera security option missing in the control panel?

    the user manual online that I downloaded says it does not exist in X 230 but I'm not able to find.

    Note that I'm uptodate with the software updates windows and lenovo

    Hello janainlenovo,

    Do you mean the Lenovo Autolock feature?

  • Vista and Sony DCR HC32 DV download compatible question - not able to find the driver

    Hello

    My laptop Vista's window isn't able to recognize my Sony DCRHC32 when I use IEEE 1394 or USB cable. It says device not found driver. Of all the posts I've read online, it says Windows Vista and above OS should have all the necessary drivers to download video DV in Handycam. Pleasee Advisor.
    See you soon,.
    Anupsm

    Hey Anupam,

    Welcome to the community Microsoft and thanks for posting the question.

    According the description, it looks like the Sony handy cam is not getting recognized on the computer.

    1. Have you tried the device on another computer?
    2. Have you tried the device to another port?
    3. Has made the work of the unit earlier on the same computer or you try to connect the device for the first time?

    I've provided methods to solve the problem of hardware recognition . Carefully follow each method. If a method does not work, go ahead with the methods following to solve the problem.

    Method 1: You try to run the Fixit.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: Follow the steps to solve driver problems

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    For more reference:

    The hunt for drivers

    http://Windows.Microsoft.com/en-us/Windows-Vista/the-hunt-for-drivers-how-to-find-Windows-Vista-drivers-for-all-your-hardware

    What to do when your hardware does not work with Windows Vista

    http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

    Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

  • Info-bubble-Widget problems with Mobile and Tablet (not able to close the target)

    , I created a menu droptown with the ToolTip widget. Why ist there is no option to hide the goal of 'no click' in the latest version of muse (sensitive)? Is there such an option in the latest version. Now I choose the option to hide "on deployment of trigger and target"-this works perfectly on the desktop, but not on mobile or tablet. When I point to the menu icon (trigger) on mobile or tablet, it opens the target, but there is no way to close it. What can I do? Can you help me with this? Thank you!

    OK, sorry guys, I just found the root of my problem. I chose "the reversal" to display the target container. When this ist is selected, the option "click" to hide the target disappears. If a "click" only works when selected for display and the concealment of the target...

  • I have portable printer HP Officejet 100 and I'm not able to load the driver BT software what is the problem?

    I'm not able to add the BT drivers, your help would be appreciated. Thank you

    You are welcome.

    Please follow the steps below to set up the Bluetooth connection:

    http://support.HP.com/us-en/document/c02652212

    If you do not have the installation CD, you can download the software below:

    http://ftp.HP.com/pub/softlib/software12/COL36711/bi-90383-2/OJ100ML411_Full_14_en.exe

    Please let me know of any problems, all available details (for example, specific error message unique behavior)

  • I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel?

    I moved my HP Office Jet printer on my desktop and am not able to work with it now. Help me - what can I do to get it back on my list of printers Control Panel.

    Hi Liz L,.

    You can try to run the printer Troubleshooter and check.

    Printer in Windows problems

    You can also check out the following link to add the printer.

    Add or remove a printer

    Hope this information is useful.

  • T510 - Bitlocker is missing from Control Panel

    I just got my new T510 with Windows 7 Professional 32 bit, and I tried to use Bitlocker to encrypt the hard drive. But Bitlocker is not found in the control panel.

    Search used in the start menu and the only result is referring to manage file encryption certificates.

    I looked in the BIOS, just in case I need to activate the TPM chipset - found nothing. All my other DELL laptops in the Office were present in the Bitlocker Control Panel. Even on my old LENOVO T60P, I could allow it.

    I don't know what is happening here, what Miss me?

    I can't believe that the new T510 missing functionality. Any help apreciated...

    OK, BitLocker is in Win 7 Ultimate (and businesses).  You can use Windows Anytime Upgrade to upgrade your Pro to Ultimate--> hit-windows key + break to bring up the properties of the system, and there is a link at the bottom left of the window (I'll memory here) that allows you to perform upgrade anytime.  You do not have to reinstall your operating system or applications, or whatever it is, it happens on site once you have paid the tax.

  • Mail icon missing in Control Panel Windows 7 64-bit

    I tried to set up my email in Outlook and this is the message I received. "' operation failed due to a registry or installation problem Outlook office 2007. So I did some research and found thatI need to create a new e-mail profile for solve the problem but my "MAIL" icon is missing from my control panel and I can not create a new e-mail profile. I tried to get through registry, tried to set Outlook as the program default for e-mail and still no luck. I use a new HP laptop with Windows 7 preinstalled.

    I tried, but the question is there is NO mail icon in Control Panel and I don't get an option in the control panel to switch to Classic view. The only option is to switch from large to small icons.

    The options are the category or big/small icons.  Small or large icons is standard view.

  • 10 Windows, system and process compressed memory & slow down the performance of Lightroom

    I use Lightroom 6.6 (non - CC version) and for months, I have noticed the degradation in performance on my machine Windows 10 the more Lightroom runs. LR restarts solves the problem for a while, but anywhere from minutes to an hour, Lightroom performance down to the level where it becomes unusable.

    Finally, I think I found a reproducible indicator in the Task Manager which may lead to the reason for this - it seems to be linked to the process "System and compressed memory" which is new for Windows 10. Maybe it's a coincidence, it could be the correlation instead of causation - but that's what I want to know.

    When I start Lightroom and edit some pictures, everything seems normal in the Task Manager:

    17-07-2016 00-59-41.png

    Lightroom uses about 6 GB of memory, which is OK, as I 24GO of RAM in my machine. The mentioned system and compressed memory process currently maintains that a low profile with the use of memory 204 MB and Lightroom performs well at this point.

    Some pictures later, however, things start to get worse:

    17-07-2016 01-09-15.png

    The system and compressed memory process increases its memory footprint and Lightroom memory footprint decreases. At this point, I think Lightroom is already slower - but this could be just imagination. It isn't so bad so I can be sure that it really is.

    But a few minutes and retouching of photos later, system and compressed memory past Lightroom in the memory usage and which are how things always become really bad:

    17-07-2016 01-37-54.png

    System and compressed memory draws a memory more and more away from Lightroom, and meanwhile, Lightrooms performance is killed. As I understand the system and memory tablet, it's intent is to compress the memory instead of disk paging-, but it seems he has high performance here and there of the implications would not even be necessary to page or compress memory because there were a lot:

    17-07-2016 01-38-08.png

    Perhaps a Windows problem, may be a Lightroom problem - chances are, it's a combination of the two. With 24 GB RAM and Lightroom be gourmet applications in memory just running, this should not occur or cause problems. I use other applications in memory such as Visual Studio, or sometimes first - this does not occur when you use this application.

    I can't believe I'm the only one knows than that on Windows 10 - yet I have not found much about it online, just a few remarks on this subject in some support threads here and there, but no solution.

    So-, here is my question d ' others have experienced this too? Someone was able to get this under control? It's really frustrating relaunch Lightroom every 30 to 60 minutes to get a good performance.

    Thanks for the tips

    b.

    There is a leak memory known in Lightroom 6.6. You might want to try to go back to Lightroom 6.5.1 and see if the problem goes away. See How do I restore a previous version of Lightroom? The Lightroom Queen and where it says Lightroom 6.1.1 you insert Lightroom 6.5.1

  • Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

    I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

    It is a problem of carrier - I would like to talk with my carrier

    Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

  • I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

    Internet, not able to browse computers on the network

    The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

    I'm puzzled.

    Hello

    I suggest you to send your request in the below link.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  • When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

    Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

    My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

    Please suggest

    Hi Mohammed Arif a. R,.

    You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

    Install Windows updates in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

    You can also view the following HP Web site and try redownloading drivers and check.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

    Also check out the following link and try the suggested steps.

    Network printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    Note: This article also applies to Windows 7.

    Hope this information is useful.

  • Icon missing in Control Panel Accessibility Options

    I needed to change a setting in the Accessibility Options, but found that the icon is missing from Control Panel. I found the file access.cpl in C:\Windows\ServicePackFiles\i386 folder. How to restore the icon in Control Panel? Thank you!

    Copy the CPL file to the C:\Windows\System32 folder. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

  • I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please advise__

    I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please notify

    Please see: How to replace the lack of software Microsoft Carey Frisch

Maybe you are looking for