System backup fails with the error no disk space

Similar Questions

• Backup fails with the error code 0 x 810000005

  Original title: error codes 810000005

  Backup fails with the error code 0 x 810000005

  Hi ElaineKingsley,

  ·         What is the exact error code is 0 x 810000005 or 0 x 81000005?

  ·         To the place where you are performing the backup?

  ·         Not him enough not space is available to perform the backup?

  I suggest you do the check disk (chkdsk) to the backup location.

  Check the hard disk for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Chkdsk WARNING: CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors. I suggest you Save the data because data may be lost in repairing this sector.

  If the error code is 0 x 81000005 see link for resolution below:

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Hope this information helps.

• Windows 7 backup fails with the error code: 0x8078012D

  I ran several backups on my external hard drive without problem, but I am now constantly a backup failure with an error code of 0x8078012D.

  How can I fix?

  Hi Helen,

  I suggest to rerun the command chkdsk (check disk) and let us know if there are bad sectors found/fixed.

  You can also see the following article for more information about the disk check:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Also, make sure that the Volume Shadow Copy service is running.

  Follow the steps below:

  a. click Start.

  b. type Services in start search.

  (c) in the search for Services Windows shadow copy volume and the Windows backup from the list.

  d. right-click on the Service.

  e. click Properties.

  f. Select the Startup Type to Manual.

  g. click OK.

  h. now, repeat the same for the service Windows backup.

  Let us know the results.

• Windows backup fails with the error "the last backup was not entirely successful.

  Original title: baclup fails

  I've repeatedly tried to back up my Win 7 files. I turned off check virus and Internet.  The only message I get back is "the last backup haven't successfully' information plus button just translates to"try again ".

  Hey Joe,

  (a) did you get an error with this error code?

  (b) do you remember to make changes on the computer before the show?

  This could be the shadow copy Volume service, and SPP services are not started.

  To restart the Volume Shadow Copy service and the services of the SPP. You must be logged on as administrator to perform these steps.

  1 open administrative tools by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. If the SPP function is disabled, double-click it to open the service properties.
  4. If the Volume Shadow Copy service is double-click on it to open the service properties
  5. click on the startup type list, click Automatic (delayed start), and then click on apply.
  6. under the service status, click Start.

  If the problem persists, follow the steps in troubleshooting section and check if that helps:

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455

  Hope this helps, if you need help on windows let us know we will be happy to help you.

• backup fails with the error (0 x 80042318) (VSS_E_WRITER_INFRASTRUCTURE)

  -J' get the following errors when you try to back up my box.

  MsSnapShot::waitop:GatherWriterMetadata:QueryStatus2 error hr (0 x 80042318) (VSS_E_WRITER_INFRASTRUCTURE)
  MsSnapShot::do_gather_writer_metadata:waitop RC(-4)
  MsSnapShot::do_init:do_gather_writer_metadata error(-2)
  SnapCMInterface::discover_apps:list_backup_selectable (RC(-3)

  -exit "vssadmin list providers" seems correct

  -"vssadmin list writers" shows nothing

  -Volume Shadow Copy and provider of software MS Shadowcopy are disabled

  LxA10,
  One thing I suggest you start by would be to run Chkdsk /r and sfc/scannow.  See if those correct any errors and test.  Also, you should boot your system and test.

  Also, if you can let us know what version of XP and what service pack level you have.  You use the backup and Restore Wizard or another program?

  Post back with the info. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WIN 7 x 64 backup fails with the error 0 x 81000019

  My backups using Windows 7 backup & restore used to work flawlessly until a few weeks back when they have started to not give the error code 0 x 81000019. I've tried everything suggested online ensuring that VSS & SPP to automatic and started. I even went a step further because I had a personal copy of all my files on my backup drive (WD My Book Studio Edition 1 TB) - I did a clean reinstall of WIN 7 thinking that would solve the problem but nothing is done - I have always the same error message "a SHADOW copy could not BE CREATED - please CHECK VSS & SPP APPLICATION of the EVENT LOGS FOR MORE information. "DETAILS: INSUFFICIENT STORAGE TO CREATE THE SHADOW COPY STORAGE FILE OR OTHER SNAPSHOT DATA.

  My backup disk has 822 931 GB free GB!

  Many others have had this same problem... Help, please!

  Mike

  Hello msab,.

  Thanks for posting on our forums.

  Please check that the hard drive is formatted in NTFS.  If you think that the updates may be the cause, unstill them one at a time to see if that solves your problem.

  I hope that this answer to your questions, if you need further assistance please come back and post, we are more than happy to help you.

  Kind regards

  Edgar
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing icons and the system restore failed with the error code: 0xc0000022

  More a cosmetic problem, but it is annoying me.  I wonder if anyone can help.

  I'll try to explain what happened and explains the steps that I tried to solve.

  At the launch of windows, after connection, some icons began to miss on the desktop.  Below, these appear to be programs of Microsoft and Apple.

  

  If I choose to properties and then change icon... from the office, I get the following error:

  

  Icons for mainly products of Microsoft and Apple are also missing from the start menu.

  

  However, if I go into properties here, the change icon... button is grayed.

  

  It happened once before.  I tried to run the system restore.  The last time I did this the system restore said have failed - however, the icons were restored.  I tried the same thing again once, however the system restore has not (yet), but this time, the icons are still missing.

  

  I tried to create a new user, but the new account also has the missing icons.  I also ran a full virus scan (Avast) and Windows Defender, but they found nothing.

  While not a huge problem, it's annoying, and I wonder if it points to a bigger hidden problem.

  Any help would be appreciated.

  Original title: lost a few icons on the desktop and start menu.

  Hello

  Thanks for the reply.

  You try to follow the below link to uninstall Microsoft Office 2007 and see if that helps.

  How to uninstall the suites Office 2003, Office 2007 or Office 2010 if you can not uninstall in Control Panel?

  http://support.Microsoft.com/kb/971179/en-us

  If this does not help then, try posting your question in the forums of Microsoft Office 2007 and see if that helps.

  Microsoft Office 2007

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007?tab=threads

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• RMAN backup fails with the error

  Hi all
  
  Oracle 10.2.0.3
  Windows 2003 Server
  
  We take RMAN backup full every day. We are facing problems while taking backups.
  Please find the error message is recorded in the backup log.
  
  RMAN-03009: failure of the backup command on channel ch1 at 2009-09-07 23:17:05
  ORA-19502: write error on file '\\VN619. In. NAB.COM\ORACLE_BACKUP\DB\DB_DATA_GHKOM9K0_3_1_20090907 ", blockno 342401 (blocksize = 8192).
  ORA-27072: IO file error
  OSD-04008: WriteFile() failure, cannot write to the file
  S/O-error: (OS 64) the specified network name is no longer available.
  
  What is happening Alternatively, some days, the backup is successful. We thought that the problem of network and changed the way network access, but since a few days, it was ok, and even now, we are facing the same problem.
  
  I spoke with our network administrators, they said its not related to the network and there is no errors in the log of their network.
  
  
  If you please advice to slove this...
  
  TIA,

  RMAN works very well. This is your network connection. He sometimes works normal, sometimes doesn't

• Backup fails with the error code 0 x 81000037

  I'm trying to run a full backup on Windows 7 Ultimate 64 bit, but I get an error message 0 x 81000037. I am backup on an external disk that was used to back up my old machine XP using the Memeo software.

  Any suggestions?

  Dave

  Failure of Windows backup while trying to read from the snapshot. Code: 0 x 81000037

  How to troubleshoot Windows backup and restore problems at one point analysis folder or its subfolder is added to a user library in Windows 7
  http://support.Microsoft.com/kb/973455

  Also Microsoft Answers post: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/ba1a7ee1-3cc0-4765-a0a8-2c4cc05caabc
  And: http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/b68afbf9-ed1d-44e2-a044-63c7911b0f55

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Backup fails with the error code 0 x 80070422

  Can not execute 'change settings' in the backup.  I get a message: "service cannot be started because it is disabled or don't no enabled devices that are associated with.» 0 x 80070422 '.  I am running Windows 7 Professional on a 64-bit computer.  Anyone have the same problem or a solution?  Thank you.

  It was for me too. Brings up a few questions... The big East... Why was first it disabled?  As Carbonite backup service would do that? and how would he leave? It's a little paranoid. So I always wonder why. It is part of a windows update? But... it worked. Sure would like to know why my installation does not automatically activate a service that is supposed to work just.

  Thank you, Tom

• OPatch failed with the error code 74

  Hello
  
  I'm on 12.0.4 & database 10.2.0.5.0 - 64bi.
  
  I am trying to apply a patch for ORA-00600: internal error code, arguments: [errior to kwqicgpc:cursta that has occurred.  But receive the error below.
  
  History of patch file: /orabase/asg/oracle/db/10.2.0/cfgtoollogs/opatch/opatch_history.txt
  
  Fix provisional application '5910901' ApplySession to OH ' / orabase/asg/oracle/db/10.2.0'
  Prior running check...
  The prerequisite checking 'CheckApplicable' failed.
  The details are:
  Patch 5910901 : Required or missing components: [oracle.dbjava.rsf, 10.2.0.3.0, newer version found 10.2.0.5.0]
  ApplySession failed when prior checks: checking prerequisites 'CheckApplicable' failed.
  System intact, OPatch will not attempt to restore the system
  
  OPatch failed with the error code 74
  
  Should it be applied to the application $ORACLE_HOME node or node of db as my db node is separate from the CM, the forms and the Apache.
  
  Below was the action plan provided by Oracle earlier.
  
  1. download and apply Patch 5910901 to a 10.2.0.3 $ORACLE_HOME and use the updated ojdbc14.jar is file.
  
  2. you can also use the 10.2.0.4 ojdbc14.jar is file.
  
  How to apply this patch and how to use the 10.2.0.4 ojdbc14.jar is file.
  
  Ask for your help.
  
  Kind regards
  DBApps

  I'm on 12.0.4 & Database 10.2.0.5.0 - 64bi.

  I am trying to apply a patch for ORA-00600: internal error code, arguments: [errior to kwqicgpc:cursta that has occurred.  But receive the error below.

  History of patch file: /orabase/asg/oracle/db/10.2.0/cfgtoollogs/opatch/opatch_history.txt

  Fix provisional application '5910901' ApplySession to OH ' / orabase/asg/oracle/db/10.2.0'
  Prior running check...
  The prerequisite checking 'CheckApplicable' failed.
  The details are:
  Patch 5910901: necessary or missing components: [oracle.dbjava.rsf, 10.2.0.3.0, most recent version 10.2.0.5.0 found.]
  ApplySession failed when prior checks: checking prerequisites 'CheckApplicable' failed.
  System intact, OPatch will not attempt to restore the system

  OPatch failed with the error code 74

  Should it be applied to the application $ORACLE_HOME node or node of db as my db node is separate from the CM, forms & the Apache.

  Below was the action plan provided by Oracle earlier.

  1. download and apply the Patch 5910901 for a 10.2.0.3 $ORACLE_HOME and use the updated ojdbc14.jar is file.

  2. you can also use the 10.2.0.4 ojdbc14.jar is file.

  How to apply this patch and how to use the 10.2.0.4 ojdbc14.jar is file.

  Ask for your help.

  You are on 11.2.0.5 and the patch is available for versions 10.1.0.5 and 10.2.0.2 10.2.03 you do not need to apply this hotfix.

  According to (ORA-600 [kwqicgpc:cursta] [139200.1 ID]), this bug is fixed in 10.2.0.4 If you're on 10.2.0.5 you don't need to apply this patch that is included in the version of your database.

  Please log an SR for this error if (search tool error ORA-600/ORA-7445/ORA-700 [153788.1 ID]) does not help.

  Thank you
  Hussein

• the system image create fails with the error e/s

  error message says to run CHKDSK/r on source/target volumes.  CHKDSK found no errors.  create system image still fails with the error e/s.

  NOTE: I've been running this process for several years without problem.  This problem is placed right after the application of all the new updates/patches to the system.

  Found a solution that works...

  format receiver volume, take him and start the system.

  recharge the receiver volume, then create startup system image.

  It worked until the end without I/O error message.

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• Backup fails with an error of device 0 x 807812.

  Original title: device error 0 x 807812

  Backup fails with an error of device 0 x 807812. I tried a disk of 1 TB of my book and a Seagate 1 TB Western Digital. Both failed with the same error. The system says that I have the most recent and correct drivers. My computer is Deel Latitude 17r.

  Hi James,

  Thanks for posting your question in the Microsoft Community.

  The error would have occurred if the services associated with Windows backup may have been disabled, you can try to restart the service, follow the steps below:

  1. click on start.

  2 type Services in the start search.

  3. in the search for Windows Services of shadow copy Volume in the list.

  4. right click on the Service.

  5. click on properties.

  6. Select the Startup Type to manual.

  7. click on OK.

  8. repeat the same for the service Windows backup.

  If the problem persists, then I suggest you run the chkdsk command, which fix chkdsk errors, follow these steps:

  i. Click Start.

  II. type cmd in the start search box.

  III. right-click on cmd.exe list programs and then select the run as Administrator option.

  IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  v. in the command prompt window, type the following command and press enter Chkdsk /R

  VI. o press when you are prompted to check the drive the next time the system restarts.

  VII. close all applications and restart the computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  When you restart, Windows checks the drive for errors, and then Windows starts. Now run the disk check in command prompt, follow the steps below:

  Now, when you try to perform the backup, I recommend that you can try to disable the temporary security on the computer software and perform a backup, be sure to activate security in the computer software.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00