System Exec.vi - .dll - problem

Similar Questions

• Problem: Using the command 'msg' with 'system Exec.vi.

  I try to write to the LabView code that takes advantage of the 'Exec.vi System '. For the moment, I have tried to use it to ping machines, return the command ipconfig and run through the code example that provides NEITHER.

  I would use the "msg" command used on Windows operating systems to send a message to several machines on our network at a time. Warning that we're about to update a program and that they should disconnect, things like that.

  I tried to use the command 'msg' LabView maintains return errors. I also wrote a quick command as follows file:

  @echo we
  CD c:\Windows\System32\
  Msg.exe /server:localhost * test

  When I run the batch of windows, it runs. When I launch from LabView (using the Exec.vi system), it fails.

  Potential quirks:

  I discovered in a different place under a machine to receive these messages they need to have a registry entry:

  "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server" and have a DWord value called "AllowRemoteRPC' = 1.

  Note that "/ Server: localhost" might be "/ server: anycomputer" and the "*" is used as a wildcard character that sends a message to anyone who is connected to this computer. Also note that the 'test' is the message to send.

  Any ideas why I'm having a problem?

  TL; Dr.: "System Exec.vi" does not have the command "msg". Why is this?

  
  

• Dialog control stamp kills system Exec.vi!

  Hello!

  I have just a really strange behavior in my application. I managed to narrow it down to a much smaller VI, please don't look at the framework, but the real problem, this test of the vi MAIN looks like this because it's a skeleton of an application more great (I had to remove a lot of relevant and confidential parts).

  So. I have a relay for monitoring USB from a 3rd party company that I use in my application via a supplied EXE perfectly. I call this exe in LabVIEW using the Exec.vi system and it works perfectly and watchdog functions as it should. However, I see a strange bug (?): if I run a browser control Time stamp dialog window, it "suspends" somehow the Exec.vi system. If my watchdog command stops setting, open relay, problem!

  I compressed my test application, and I can reproduce this same problem, although I have just called a BREAK to gain control of command line. Note that, in my real application, the control of time stamp is in another, said dynamically (call and forget the method) VI, but I get the same bug!

  Steps to reproduce the bug:

  1. launch my app
  2. observe that the iteration of the loop at the bottom
  3. Click browser control time to bring up the dialog window.
  4. You can see the background loop iteration has stopped (iterations of the loop DAQ)
  5. If you close the dialog box, the background loop continues execution

  What the heck is this?

  How this is possible, why there is "interference" between a completely separate control and a loop of low system Exec.vi?

  Thanks for any suggestions!

  I hide in my real application, as a solution, just the element browser control time stamp...

  LabVIEW is a software component called root loop which is used by different parts of the LV. opening dialogue blocks the loop of the root, which is probably what is blocking the DLL called inside the exec system VI. Probably, you will be able to do as opening a menu and leaving open.

  You can do a search for the term to learn more on this subject, but I don't think it's all you can really do about it.

• blue screen error message: < root Windows >-system 32\ hal.dll. missing or damaged

  Problem: Cannot start (not even in safe mode)

  Operating system: Windows XP pro

  PC: DEll 2400

  Error message on blue screen:
  "Windows did not start because the following is missing or damaged:

  ------System 32\ hal.dll.

  I do not reformat the hard drive and lose all my programs and data.

  If anyone can help, I would be extremely grateful.

  Thank you

  HAL811

  Hello

  I have fixed many times by the steps described in this article...

  http://support.Microsoft.com/kb/330184

  This is not guaranteed because the problem can be reduced to hard drive failure rather than just the corruption of the boot.ini file.

  If it does not solve the problem, post back and I will get back on it.

  Tricky

• Receive error message: "C.\windows\system 32\TAPI32.dll" is not designed to run on Windows at startup.

  original title: how to fix "C.\windows\system 32\TAPI32.dll".

  When starting, I get a message saying "C.\windows\system 32\TAPI32.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or support software provider."  What can I do to fix this?

  Hello

  You did changes to the computer before the show?

  Method 1: Follow these steps and check if that helps.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• When I start the computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error.

  a.o.a, when I start computer and a box will appear "winlogon.exe - Bad Image c:\program file\setting manager \system\x64\sysapcrt.dll is either not designed to run on the window or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider." Here again, box comes and says bad googleupdate.exe Image.  I open the cutting tool, then again the box comes snippingtool.exe - Bad Image. Please solve my problem

  Original title: bad image

  Scan the PC for malware http://www.malwarebytes.org/antimalware/

• Using FTPClient on a real time with system Exec.vi

  How can I tell FTPClient.exe address target when I start this executable with system Exec.vi in Labview?  I don't want to reinvent the file FTP utility used by MAX with targets in real time. I want to run this executable to a labview support utility without using MAX to do.

  Is this possible?

  Danny

  Thanks for the info.  Your "bad mood" response "suggests" a response to my question.  However, the full answer to my original question is that it is not possible to use FTPClient.exe outside MAX.  It is therefore not possible to spend in the address target at run time if the FTPClient.exe runs external to MAX.  FileZilla is a good choice - there are also other FTP clients out there, but you pointed out a solid choice.  Thank you.

• hpqpsutils02.dll problems with HP Photosmart 3.5

  Original title: hpqpsutils02.dll problems

  How I have this dll in HP Photosmart 3.5

  Hey,.

  hpqpsutils02.dll is a file that comes with the HP Photosmart 3.5 software. It would be better if you can contact HP support regarding the same.

  http://h30434.www3.HP.com/

  If you have the software disc, and then try to uninstall and reinstall the software. That could help.

  Here is a link to HP forum that talks about the same question you have on your computer.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/hpqpsutils02-dll-error-message/m-p/1495347#M57828

  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

• c:/windows/system 32/dx7vb4.dll

  When I restart my computer say unable to load c:/windows/system 32/dx7vd4.dll

  When I restart my computer say unable to load c:/windows/system 32/dx7vd4.dll

  Please check the spelling of the name of the file that you list. If your spelling is correct, you need to perform a malware scan. I recommend that scan you with Malwarebytes. Download, update and perform a quick scan, choosing to remove whatever it is detected by the analysis.

  Malwarebytes.org

  How to use Malwarebytes

• alert! system battery is low problem for dell optiplex GX620 Tower

  alert! system battery is low problem for dell optiplex GX620 Tower, how do I fix or solve this problem, is this will solve by change coin cell? If yes than suggest me about the cell its name will be full description

  The battery is a battery CR2032 DL2032.  In the USA they are in grocery stores in the pharmacy section because the readers of blood sugar using the same battery.

  http://www.Walmart.com/c/KP/CR2032-batteries

  

  

• Pavilion dv2615nr: lack of system 32\NvCpl.dll

  I've updated a laptop from a friend, and maybe he just can't run windows 10 64-bit edition.

  in any case, I started with Windows 7 Ultimate and had everything works fine but since I went to 10 I have two error messages.

  There was a problem starting C:\\Windows\system32\NvCpl.dll and

  There was a problem starting C:\\Windows\system32\NvMcTray.dll

  I searched and search and I know it is related to the NVIDIA drivers but I reinstalled and it keeps the switch back to default microsoft video drivers. I have to get rid of him on a restart after that relocation, but he came right back the next time I restarted the system.

  The laptop seems to work very well and I would be happy to just get rid of the error messages.

  I hope for more help!

  See you soon,.

  Jim

  Hi, Jim:

  Uninstall all graphics drivers nvidia you have previously installed and restart.

  Then manually install the driver Vista support page for your laptop as follows...

  This package provides the graphics/video driver and a user interface for graphics NVIDIA MCP67M in the notebook models and operating systems. This driver allows the video display and implements a UI for settingvarious shows the properties.

  File name: sp37873.exe

  Download and run the above driver file.  You will probably get an error not supported operating system.

  Conclusion of any windows error you get.

  Go to Device Manager and click on the map to display Microsoft base needing the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp37873.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart.

• How to operate the system Exec (Batch file) as an administrator

  Hello

  I have a batch file that I need to run. But it should work with administrator access.

  How can I run a command line by using the Exec.vi system as an administrator?

  I was able to "solve" this problem with a work around.

  I installed the 64 bit version of LabVIEW that calls the appropriate 64-bit shell to execute the TFTP call.

  I do not understand the lack of functionality in the 32-bit version and the 64-bit version seems to work.

• Use the system Exec IrfanView to open the JPEG file

  I am trying to use the Exec System call Irfanview to open a Jpeg file, and the following error occurs:

  "Error 2 occurred in the Exec.vi system. Order has been "iview32 c:\test3.jpg/Hide = 3 pos = (30,30)."

  "LabVIEW: memory is full."

  "NOR-488: no listener on the QPIP.

  I then tried to add "cmd/c" in front of the command, but the windows open and close just flash BACK and then nothing happens.

  I have no problem opening jpeg format in the DOS command window.

  Can anyone help?

  you don't need to specify the full path as long as you have the path in your path variable

  I think that the problem may be that you are using the wrong program name, I think it's i_view32 not iview32

• No sound, unable to update windows, a variety of error codes and dssenh.dll problems... Help?

  I'm running a Toshiba with Windows Vista. The 24th of this month, I have installed the updates for my computer, but when I rebooted I had absolutely no noise. I double checked to make sure it was not cut, I uninstalled and reinstalled the drivers, and then I tried to do a system restore. None of them worked.

  Then I tried to check updates more see if this would help to solve my current problem and began to find more mistakes, such as "could not find updates, error code: 800 b 0001 ' or 'Code error 8024402F' these are mistakes that I see most.

  Then when I go to open certain programs I get errors that say something about ' bad image: problem with Dssenh.dll "when I try to save it again, I get other errors with about 5 other .dll files.

  Of course, I went to the Microsoft website long enough... and I went through multiple options and steps, but nothing helped. So I thought that my last option is to ask.

  The last thing I can find is to download the "System update readiness Tool" to check for problems.

  Well, I can't download or run because of my error '800 b 0001'.

  I don't know what I would do at this point... Help?

  Before the update from the update began when my computer was being restarted... I had a black screen and had a weird three-step process that was supposed to be recommended. Meanwhile, there was a flood of information that crosses the screen.
  I ran a scan complete antivirus just in case, but it could be a virus that has not been detected?

  If anyone has any information, it is greatly appreciated... I don't know what to do.

  McAfee (and Norton) applications are notorious for not to uninstall (or upgraded) themselves!

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 test cycle.

• I am trying to run Halo 2 on windows 7 n 64-bit OS. MFPlat.dll problems

  I am trying to run Halo 2 on windows 7 n 64-bit OS. The game installs properly and is registered. When I start the game it says the the mf.dll and mfplat.dllfiles are absent. I downloaded both of dll.com and install in my system 32 file and file of halo 2. The message I get now is that "point of entry" is missing from the file mfplat.dll.

  Hi, Landon5050,

  If you get to the missing file mf.dll errors or any other errors with the mf.dll file, we suggest that you re-install the program, uninstall and reinstall a newer version, or check to see if updates are available for the program associated with the file instead of trying to copy a new version of the file on the computer. File errors are often caused by more than just a missing or corrupt file and copy a single file could cause more problems.

  http://www.computerhope.com/cgi-bin/process.pl?p=MF.dll

  These dll files exist in Windows, but there are also in the Halo installation directory. The equipped versions of Halo are older and is not compatible with Win7.

  Rename the files in your directory of Halo or replace them with newer versions of your directory %windir%\sysWOW64 or % windir%\system32.
  http://www.computing.NET/answers/gaming/Halo-2-missing-DLL/11709.html

  For re - save these files follow this step:

  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator.

  2. type regsvr32 mf.dll and then press ENTER.

  3. new type regsvr32 mfplat.dll and then press ENTER.

  There is a patch for this game as well. Have you tried to install the patch and check if it helped.

  Here is a link to download the update for this game.
  http://download.Microsoft.com/download/b/0/e/b0ec1acf-8623-4520-9764-75baaffc0718/Update.exe

  Run this update after the game is installed.   -DivyaR - Support Engineer

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Halo-2-missing-DLL-files/def138fb-7b9a-4AA1-BDD5-a6171534aaaa