System fails to recognize the power supply and will not charge the battery

Similar Questions

• My windows xp crashed and will not charge. I have the original disc of gold and reloading has so far as to ask the key 25 digits

  My windows professional xp crashed and will not charge. I have the original, but on the sticker affixed on the packaging it sayswindows xp pro genuine adv engl 16 h intl live cd NO KEY - so I did not have a key. I also have a professional windows sp2 oem disc with a yellow key sticker license but apparently is not the correct key to activate my drive in genuine advantage kit. Where can I get this key please?

  Hey Derek,

   

  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you cannot activate Windows Genuine Advantage Kit after crashing Windows.

  I suggest to follow the steps below and we update on the State of the question.

  How to activate Windows XP:

  http://support.Microsoft.com/kb/307890

  Update your Windows product key:

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

   

   

  Frequently asked questions about the Windows Genuine Advantage Kit:

  http://support.Microsoft.com/kb/932301

   

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• My safari has stopped working and will not charge

  My Safari has stopped working and will not reopen little matter how hard I try. I was told to paste some information on this forum.

  Try to open Safari in safe mode.  Make sure Safari is no longer running, the black dot in the icon on the Dock should not be visible.  Hold down the SHIFT key while clicking on the Safari icon.  If Safari loading, the problem is related to the third-party extensions or plugins.

  If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support

• Sony Xperia z3 Turned off and will not charge after being immersed for about 5 minutes

  As the subject says. My Xperia Z3 was submerged for about 5 minutes in less than a foot of water. He was in charge at first, then it started to vibrate. The model will thus: 1 (typical to indicate the load power) Vibration, then a Triple vibrator. At this point the LED on the phone turns off. Now he's going to restart this process again and again until the phone is disconnected. That submerged while the phone components were closed and did not open. As far as the damage is concerned, it is a crack in the root of the hair in the backglass and part of the bezel has started to peel off near the camera for unknown reasons. Once again this damage is very slight, and only someone who knows what the phone looks like new would see same. Any help would be apperciated.

  I'm sorry to see it, but you will need to contact your local care Xperia

  http://support.sonymobile.com/global-en/contactus/

  Request a trial of vacuum.

  The crack may be the cause of the water damage.

• 30 T power on and will not start

  I have a Thinkpad to 30 T.  No changes were made to one of the hardware store.  When I turn on the system, it will attempt to power upward.  When that happens, he can't find the hard drive.  This disc was removed and tested and the disc is good.  I bought a replacement and also installed disc with the same results.  I put the original disk in.

  Not having only not troubleshooting skills, I don't know where to go from here to repair the laptop.  Any suggestions where I should look next?

  Looks like there is a problem with the motherboard, from a couple of knowledgeable friends.  Time for a new laptop computer. No interest in throwing money in the old computer when a new one will cost a bit more than what it will cost to repair it.

• Satellite A100 has a black screen and will not charge in the Bios

  I bought a Satellite A100 - (model psaa8c-0fh00e) about 5 months ago. It was left overnight, which is not uncommon, and when I came back using about 15 hours later it was just a black screen. moved from the touch screen and keys, and nothing did. so I cold it starts and he died. I then turned it back as usual and the laptop turns on but the screen is completely black. It's not loading the normal Toshiba Bios screen.

  Now my question: If there is any way I can solve this, I am familiar with computers and parts. I don't get this cause I've ever had to reflash the wood or something like that. I am unsure of how to activate and I really want to have to take it to a shop, any suggestions would be helpful.

  Thanks in advance.

  Hi Conrad,.

  If your 100 starts normally (spinning HARD drive, optical drive LED flashes, fans turn etc.) then I suppose that your FL inverter or LCD screen is not. You can check this by connecting an external monitor to the laptop to see if it shows the normal display.

  On the other hand if there is no activity at all portable computer turn when you turn it on then I guess you have an internal hardware failure, possibly the main card, which must be checked by a Service partner authorized Toshiba since the unit is still under warranty if it is only 5 months old.

  Kind regards

• LC - E6 quickly shows the flashing orange light. Will not charge the battery.

  The charger that comes with my new 5 d Mk III LC - E6 battery could not operate right out of the box. Would not load my new battery, nor any of my other Cannon batteries. Amber led flashes quickly.
  The old LC - E6 charger supplied with my EOS 7 d charging these batteries normally.
  I updated the scrapped charger delivered with my 5 d Mk III, and bought a new LC - E6 B & h. This unit has the same question. Sometimes it will load some of my batteries of Cannon, but more often the clear amber, after 20 seconds of just flashes quickly and will not charge the battery. My old charger LC - E6 Bill still all these batteries in normal mode.
  I use brand Canon LP - E6 batteries in these cameras.

  I followed the instructions found in the owner and guide online the site of Canon USA to charge the battery. The batteries are relatively new and show the good working condition on the information panel of the menu camera camera battery. These units (LC - E6) never worked properly.

  Tim,

  AC power removed normal home. All high-tech devices are functioning normally.

  As for replacement by Canon, I don't have the original invoices for this item, so I'm just going to buy another.

  Thanks again for your contribution.

• Corsair POWER supply update does not post, powers of the powers of 5 seconds down and loops...

  Have the HP Pavilion Elite m9650f with motherboard replaced in April 2012 class good to go.

  Replaced the stock GPU Nvidia GeForce 9800 GT with a Zotac GTX 560 Ti GPU and

  the stock HP 460 Watt power supply with a W0388RU Thermaltake TR2 600 Watt PSU in may 2012.

  All goes well until October 2012.

  PC randomly starts shutting itself off the coast and not feed until I have unplug the power cord and wait 5-10 minutes.

  Finally, he stopped turning on all together.  Reinstall all power PSU connectors, etc.  same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstall the stock HP 460 Watt PSU, now everything works fine.

  Thought it was a premature failure of Thermaltake PSU.

  Bought and installed a Corsair CMPSU - 850TXV2 850 Watt power supply for a few days but still not good to go.

  Lights, fans spin, but no MESSAGE, no video, tracks for all

  5 seconds, stops, turns on itself over and over again.

  Reinstall all power PSU connectors, etc. same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstalled the HP PSU stock, now everything works perfectly again.  ?

  Spends hours reading the forums...

  Some say that the RAM may not report correct voltage for power supply.

  If so, what can I change RAM voltage in the BIOS?

  Others say reset CMOS I did, same result.

  And someone on this forum HP thought that perhaps the Pegatron IPMTB-TK

  Card mother Truckee can only accommodate up to 750 Watts POWER supply.

  Any ideas?

  Can I get away with just using my HP 460 Watt power supply after all stock?

  Thank you.

  I have an additive to add to this topic.

  To refresh, my questions focus on a possible shift of the power supply and card mother specs:

  What is an ATX 12 v 2.0 and above technical problem or a power CAP problem?

  I posted my questions on the Forum of power SUPPLY Corsair PSU

  at the same time and I paste it here now, a response

  to GUY of RAM.

  "Hey RAM GUY."
  
  Sorry I couldn't answer until now.
  
  Please specify the difference between the ATX 2.0 specification and 2.01
  
  Spec that the negative - 5 v Rail is not present in the 2.01 spec and
  
  beyond.  As I mentioned previously, the Thermaltake PSU that has been
  
  running in my 2009, HP i7 tour for 7 last month said 12 volt ATX 2.2
  
  on the case and even if the power supply HP OEM said 12 volt ATX
  
  2.0 in the technical literature, that I found on Google, the real PSU I have does not work
  
  have any note on the case ATX specification.  So I think it's safe to say, my
  
  motherboard does not have the negative Rail v-5 at which he played
  
  nicely with 12 volt ATX 2.2 spec, until recently.
  
  Although theoretically it is supposed to be no limit on the amount of
  
  Absorbed power, you can use to power your motherboard, the motherboard because
  
  is supposed to use only what suits him and cap the rest, it seems that the OEM
  
  can dial up limitations of power if they deem necessary.
  
  Could be as simple HP, without wanting to compete with some of his HPs
  
  Professional workstations, caps so power on some Pavilion Elite
  
  Series models to prevent them from becoming a much cheaper
  
  solution.
  
  In any case, I think that all the available information, digested, he does not speak
  
  Specification of the ATX, but rather my motherboard HP has a limit of 650 Watts of power
  
  If I think that I read that someone else got the same motherboard goes with
  
  750 watts, but I do not remember where to find this announcement. »
  
  I'm back and Yes!
  
  Thanks again Lasvegaswireman!

• I want to replace the power supply and graphics card in my p6550z

  Hello

  I'm looking to replace my power supply (BESTEC 300 watts) and the graphics card (ati radeon hd 5450). Here is a link to the HP page with my pc: http://h10025.www1.hp.com/ewfrf/wc/product?product=4242359&lc=en&cc=us&dlc=en&lang=en&cc=us

  The card I want to put is an Amd Radeon HD 6870. And I also want to put in a block of power SUPPLY Corsair 550 Watt.

  They will work when I install them? (I'm actually a little nervous about the upgrade my power supply and graphics card since it is the first time I'm doing this) (I'm also nervous because I've heard many horror stories about upgrading an HP computer)

  Hello

  There is a small metal tab inside (guts) on some models of PC HP adds stability to food. You'll have to push the tab down to get food out.  The link below will show this tab.

  How to replace a power supply.

  How to replace a video card.

  Corsair power supply (psu) I used can be mounted with the fan facing upwards or downwards depending on where fresh air is available from. Some PC cabinets have mesh ventilation where the PSU Monte so the fan should face the ventilation mesh so that fresh air can be brought into the power supply and then exhausted at the rear. Some HP computers have slots to air ventilation through the upper edges of the flanks and in this case, the PSU is mounted to the top fan. Otherwise, the Assembly of the fan should be such that the PSU will draw air from inside the Cabinet.

• Replace the power supply, computer does not turn on

  I had a Seasonic SS 560 KM power supply for my HP Pav e9280t.  I removed the old power supply while keeping the power cable is plugged in.  Then replaced each power cables one at a time in the new power supply and finally he attached to the tower.

  Now when I try to turn on your computer, it just boots barely upward.  I can hear the fans kick on for a second or two, then everything just stops.

  Since I replaced the cables one at a time I don't think I missed anything; MoBo, Fan of MoBo, 1 optical drive, disk HARD 2 and 1GPU.  The tower is open and I can see the fan, the fan GPU MoBo and PSU fan all hang on one second so that they get the right power?

  I must have missed something or possibly faulty PSU?  Any help will be appreciated.

  Hello Chadow86, it is possible to the new power supply may be faulty. I would check double all the connectors again.

  Since you mentioned the fan to the motherboard, it would not be necessary to unplug the CPU fan when you changed the power supply. The CPU fan power source comes from the motherboard and not directly from the power supply. I don't know what fan on the motherboard you are talking about.

  I watched the specifications and photos of the new power supply. It is a modular design. I would check the cables connected to the power supply to make sure that they are in the correct connectors.

  If the system still does not start, the cause could be a new power supply faulty.

  I hope this helps.

• New power supply and logic board?

  I need to get a new power supply and the logic board put in my iMac - when I did, this is my iMac will be indented from the base/settings (i.e. will I need to put everything on my external hard drive to backup) or will all my personal data / records/work etc., always be on it?

  All your data, applications, and settings are on the hard drive, if that is not replaced everything will be as it was. That said, you should always have a backup before you take your mac at home.

• HP ENVY 700-527c: upgrading of power supply and graphics card, need help

  You just bought a NVIDIA - GeForce GTX 970 4 GB GDDR5 PCI Express 3.0 Graphics Card - silver/black for my HP ENVY, but the food I have in my computer does not support this graphics card. So I was wondering if I bought the Black Corsair - CX series modular CX750M 750W ATX Power Supply - if it could fit in my computer and function properly with the graphics card and all the rest of the computer.

  Almost thought you made a mistake, but you do not have BIOS rev 8 because this unit originally comes with WIN 8. The GTX 970 attracts only 145W. Corsair CX750M is3.39"x 5.91"x 6.30".  It is profoundly in your case, without connectors.   You have so much room between the existing power supply and connectors for DVD?  NVidia recommends a 500W, I would say the 600W modular version.   Its depth is 5.51 ".

• Power supply and battery...

  I've often used my laptop with power supply and the battery plugged in at the same time... Is this correct?... I confused the battery after charging or leave it in my laptop to go... I want to protect my battery so please tell me the right

  Dear med87,

  Welcome to Lenovo Community

  Under the program of the energy that should come with the computer as a pre-installed program management, you must press (settings battery) then under the battery you should have called the battery Protection Mode, select it and press OK.

  This Mode charger the battery Up to 60% and stops charging the battery, then it take its power from the charger, it's the best thing you can do to protect your battery.

  Please try the computer, if you have had other problems, let me know.

• Power supply and graphics card update

  Hello

  I own a HP p6610f desktop computer and want to upgrade my power supply and graphics card.

  Power supply:

  I saw recommended Corsair CX500 and I found a CX500M of Corsair for sale. I'm fairly certain that it will work with the graphics card, I'm considering the purchase. The CX500M would work with my device?

  Graphics card:

  I have need later in the technology of graphics card but I still want to improve my current AMD Radeon HD 4200. I plan an AMD Radeon HD 6570 because it meets my needs and fits my budget. Would this work with my p6610f and a PSU Corsair CX500M?

  If it helps, I want to update the graphics card to play some place the modern games (Assassin Creed Revelations and maybe Assassin Creed 3 on low heat) and possibly install a Blu - Ray player.

  I ask because I can't seem to find an answer clear enough to calm my fears to ruin my computer if I go with these two options.

  Thank you!

  Food: The CX500M of Corsair is a great choice and will definitely enter the computer.

  Graphics card: you can get a Radeon HD 6670 for the same price as a Radeon HD 6570 and on a faster card of 20 to 25%. Or a little more money, you can get a Radeon HD 6770 and about 125% faster. In all cases, measure from the rear of the case further along the PCIe x 16 location plan. Just shy of an obstacle comes as long of a card you want.

  Please send BRAVO

• Upgrading power supply and graphics card for HP-Pavilion VD012AA-ABU m9753uk

  Hi guys

  I have a HP-Pavilion VD012AA-ABU m9753uk with OS windows 7 ulitmate and I want to upgrade my graphics card to a Nvidia GTX 560Ti and I was wondering if this card would hold on my motherboard. I know that the motherboard has a PCI Express x 16 slot and be ok 1, but I don't know that I need to look at, I know there are several variants such as ATX and others because I have only a 300 watt power supply, I need to spend at least a power of 500 watts power however im don't know what connectors my computer has to power supply and what kind you provide and also is here a chance to overcharge me my other components such as my processor or CPU due to the increase in power as I currently have a graphics card Nvidia GT 220 installed if that helps at all

  Here are the specs for my graphics card (http://www.geforce.co.uk/hardware/desktop-gpus/geforce-gtx-560ti/specifications)

  also here are my computer Specs (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01817967&prodT...

  any advice you could give me the guy would be great I never made any changes to my computer with acclamations im not sure what to do

  Hello

  Consult this publication document for more information.  Open your PC and measurement.  The NVIDIA 560 TI type is 9 "long.

  I don't see a problem with the NVIDIA TI 560 and the m9753uk.

  You will need a power of 500 watts.  The Corsair CX500 is an excellent choice.

  ' HP ' how-to ' articles should be useful.