system - failure - windows update status

Similar Questions

• My system crippled Windows Update

  my system crippled Windows Update. Lights on. All the tests of transmitted material. Try to restore but it does allow me to enter a restore point and none come up when I click on the show more restore points box. What should I do?

  If you are unable to find a repair disc, you will have no choice but to run a factory restore.

• restore system and Windows Update

  Windows 7 Home Premium SP1,.

  Windows Update no longer works... It hangs on the VERIFICATION of UPDATES...

  I tried all types of corrections.

  Finally, I tried to make a rerstore of the system to a date where EVERYTHING WORKED very WELL.

  Windows Update still does not work.

  Why a system restore NOT rerstore Service of associated system components Windows Update?

  Because they are broken. Only insufficient. Install the latest version of the client update Windows, included in the cumulative hotfix July 2016. See:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375?page=11&msgid=52e74cd6-a9b8-45ac-BD1B-bc3ed60488bd

  Automatic updates to 'never check updates' and restart Windows before the manual installation of the value, and then install KB3172605.

  Best regards, VZ

• Cannot use restoration system or Windows updates: 80070017 error?

  I want to do a system restore because my system has encountered serious problems.

  But when you try to restore fails and I get the error message: "data error (cyclic redundancy check). (0 x 80070017) »

  I also won the same "80070017" error code when I try to install the updates using Windows Update utility!

  A little research told me that it may be corrupt or missing files on my, so I run chkdsk.exe and scheduled a restart it control and repair.

  Chkdsk.exe ran on starting and from what I remember there were replaced for some reason files any.  However, it took a long time so I left during the night and woke up to find my loan to connect system. I'm not entirely sure of what were the errors it and whether or not they have corrected!

  So I ran sfc/scannow and these are the results: abbreviated errors - complete (.txt files)

  Needless to say what these two did not help.

  If anyone has any ideas on how to get system restore to work that would be great!

  Thanks, Rich.

  Well, the Diagnostic tests showed a pass on my HDD without any problem when I ran origanally.  So I decided just to do a reinstall of Windows that I wasn't getting any case with the restoration.  But I couldn't do that, that failed too!  Another error code to add to the collection

  In the end I had to use Dban to completely erase the disk as it seemed the only choice, Dban found no errors of disc during this process either.

  After said and done, it looks now my drive has bad sectors on it, during the installation of Windows, he warned me my disk was not and the WD Diagnostic tests also shows a failure with number of sector transferred, value - 132, 140 threshold, worst - 132.

  Guess it's time again to HD.

  Thanks for your help!

• "Error loading operating system" after windows update

  I have an ASUS EeePc netbook model: 1005PEB. Last night before going to bed, I stopped the netbook and it has begun to install and configure windows was last updated. I left on the office do its thing and went to bed. This morning, I got the netbook and it went out of the car and it turned on while I was about to leave the House (before ask you, no I ' was not flying). He started installing all the updates that it had installed the night before. It has gotten to the point where it installed the last element and hung up there. I leave a this screen for 45 minutes and nothing has changed. I went against my better judgment and off the netbook. When I went immediately to turn it back on all I get is "error loading operating system". I tried to use F8 to try to start it in safe mode and I can always access the BIOS. How do I get this service still? I don't have really any data here, I'm too preoccupied. Thanks for any help anyone can offer.

  Hi argyle_83,

  Were you able to boot into safe mode?

  This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows 7. You can try the steps below to resolve this issue.

  Method 1: Obtain the latest BIOS updates

  WARNING: This article contains steps that may involve changing your BIOS or parameters of semiconductor (CMOS) to complementary metal oxide, or that may require you to make physical changes to your computer hardware. Incorrect changes to the BIOS of your computer may cause serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved.

  Your first step to solve the problem of the error loading operating system should be updated to your computer BIOS.

  Contact the computer manufacturer to find out how to obtain and install the latest available for the computer BIOS update.

  Find information of BIOS on your Netbook from this link.
   
  http://support.ASUS.com/download/download.aspx

  Here are answers to some common questions on the basis of input/output system (BIOS).

  BIOS: Frequently asked questions

  Method 2: Run the Startup Repair

   

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting.

  Refer to this article for more details.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Calls, by a representative of the system of Windows Update?

  I received a call from a man by the name of James, who claims to be a representative of windows update system. It said my email had been hacked by Ashley King and that people receive a lot of spam to me. He said that I had to go on my computer immediately and allow him to correct this problem. I asked for her phone number... 800-630-0583. He is not my email addresses, but claimed to have my IP address. Is this a problem? I'm sure it was a scam. I don't give him no information and it was very demanding. He told me to go to my computer and turn it on. My computer was already, but I hung up. Please advise me on this. Is my computer safe? Thank you.

  Hello

  I completely agree with your actions. It was definitely a scam designed to trick you into revealing personal information, such as your email address. What he did probably was trolling the internet and came across your computer, "in the wild". Once a computer is, the IP address is automatically called.

  As long as you are protected by a robust inbound and outbound firewall and antivirus / antimalware you are reasonably safe. I use PrivateFirewall from Privacyware as my firewall. It also offers a protection anti-phishing and antikeylogging as well. It is freeware. See here for more information: http://privacyware.com/personal_firewall.html .

  I would like to know if this helps you or if you need more specific information about something...

  Kind regards

  BearPup

• Problems with updates 'Configuration failure Windows updates.

  When I reboot to set up updates I always get the message "Failed to setup of the Windows updates" and at the end he "try again" a new message appears "Returning changes" and obviously no update is installed. Any suggestions?

  Hello

  I see that you are unable to install updates on Windows 8. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  I suggest you to see stages of Windows 8 of this article and check if that helps.

  Error: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates: http://support.microsoft.com/kb/949358

  I hope this helps.

• Constant failure Windows Update

  Hello! I tried to update windows 8 to 8.1 for a long time and keep on error # 0x8020002e, I have reset windows components update automatically and manually, tried to start own mode, clean the cache of the store... and nothing worked, also I have disabled the firewall and anti virus with no changes at all... Please help!

  WIN8.1 is provided & installed through shop Windows, Windows Update No.

  Try to post here instead,-online http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install-wininstalls

• Error message "failure configuration windows updates, changes in recovery, do not turn off computer.

  I tried to update my laptop with windows updates and an error message "failure windows updates, changes configuration recovery, stop computer" has been there for 20 hours and nothing happens. I can't get rid of this message despite the closure of the laptop for 2 hours and take out the battery. How can I get out of this perpetual loop please?

  I have windows 8.

  [Original title: Windows updates]

  Use any method is needed to access Advanced Startup Options in Windows 8 or 10 including if necessary to the installation media to create for Windows - 8.1 help Windows to start in console repair on the second screen.

  Startup options run the system restore which is the first line of defense and still has a Restore Point before installing the updates.

  If it does not try to repair the startup or as a last resort a refreshment or a Reset.

• Windows Update and System Restore does not work after that the virus

  I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

  Hi TedDanson,

  1. do you get an error message when you try to run the restore system or Windows updates?

  I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

  Microsoft safety scanner

  I hope this helps.

• I'm getting 'Failure Configuring Windows Updates, changes of restoration' by updating windows.

  It was the first time that I am trying to update my laptop of Lenovo G500s which is come with 8 windows pre installed, before installing the updates, I have restored the laptop if you default factory using Lenovo a recovery key. While the updates are being installed I received a message 'Fail configuration Windows updates reverting changes'. It lasted for an hour. When I tried to install updates again the same message appeared. My laptop came pre-installed with Nitro Pdf 8 and Mcafee Internet Security, so I have even uninstalled them, I also ran Mcafee Consumer Product Removal Tool. But the problem with windows update remained. I then ran the convenience store update Windows that sets these two problems:

  fix windows update fixed the database and repair misconfigured update windows components, but this solves nothing. Later I discovered that although the resolution of update problems show that the problems have been solved but convenience store running immediately shows again the same problems.

  So this time I ran again the recovery system, and immediately after the system recovery windows update of convenience store that showed the problems mentioned above two updates of windows.

  Is it so that means the recovery partition itself contains other problems that my problem would have been solved, what do I do to fix this?

  Take a look on: http://support.microsoft.com/kb/947821/en-us

  ... use the Deployment Image Servicing and Management (DISM) Inbox. Then, install the update or Windows service pack again...

• On Qosmio F45-AV411 errors Windows Update

  Hi all

  Below the discussion with me and the microsoft support on the problem to my laptop.
  What can I do next? Thank you very much.

  Hi Jon,

  Thank you for your response and delayed apology.
  After that I will review the outcome of the System File Checker, it shows that there are corrupted files in impossible to remedy Windows and Windows system files. So the next step is no choice for the repair of Windows and if you have a computer of OEM manufacturer I'm afraid that you do not have to have.

  You should ask the manufacturer of your computer to this Windows repair. If they're going to ask you to make a Windows Recovery please backup all your important files, as he'll recover your computer originally manufacture settings.
  Thank you for your cooperation.
  Your patience is much appreciated.

  Kind regards
  Agung Berbudi
  Online technical support Microsoft South East Asia
  http://support.Microsoft.com

  Dear love, thank you very much for your suggestion. This is the result in the attachment. What can I do next? Thank you very much.

  Best regards, Jon

  Sea, 12/17/08, Agung Berbudi
  From: Agung Berbudi

  Hi Jon,

  Thank you for your reply and appreciate for all information you is provided. As you can see below, your Windows Update failed with the majority two 0x80072ee2 and 0x8024402F error code (AutomaticUpdates software failure Windows Update Sync Client has not detected)

  2008-12-17 02:24:42:647 1248 11 c 0 Misc WARNING: WinHttp: httpRead failed. error 0x80072ee2
  2008-12-17 02:24:42:647 1248 11 c 0 Misc WARNING: WinHttp: DoFileDownload PerformDownload failed. error 0x80072ee2
  2008-12-17 02:26:49:068 1248 11 c 0 Misc WARNING: WinHttp: httpRead failed. error 0x80072ee2
  2008-12-17 02:26:49:068 1248 11 c 0 Misc WARNING: WinHttp: DoFileDownload PerformDownload failed. error 0x80072ee2
  2008-12-17 02:28:50:562 1248 11 c 0 Misc WARNING: WinHttp: httpRead failed. error 0x80072ee2
  2008-12-17 02:28:50:562 1248 11 c 0 Misc WARNING: WinHttp: DoFileDownload PerformDownload failed. error 0x80072ee2
  2008-12-17 02:30:53:412 1248 11 c 0 Misc WARNING: WinHttp: httpRead failed. error 0x80072ee2
  2008-12-17 02:30:53:412 1248 11 c 0 Misc WARNING: WinHttp: DoFileDownload PerformDownload failed. error 0x80072ee2
  2008-12-17 02:30:53:412 1248 11 c 0 PT WARNING: ECP: impossible to download the cab of http://download.windowsupdate.com/msdownload/update/software/dflt/2008/08/1482251_2efbea463be5fa586ebf8f6b1b011fb5451fb501.c ab
  with error 0x80072ee2

  2008-12-17 02:30:53:413 1248 11 c 0 PT WARNING: ECP: this trip contained some optimized updates failed. New number of update = 1, old Count = 10
  2008-12-17 02:31:01:245 1248 11 c 0 PT WARNING: synchronization of updates: 0x8024402f
  2008-12-17 02:31:01:245 1248 11 c 0 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
  2008-12-17 02:31:01:246 1248 11 c 0 Agent * WARNING: could not synchronize, error = 0x8024402F
  2008-12-17 02:31:01:264 1248 11 c 0 Agent * WARNING: exit code = 0x8024402F
  2008-12-17 02:31:01:265 1248 11 c 0 Agent *.
  2008-12-17 02:31:01:265 1248 11 0 Agent c * END * Agent: finding updates [CallerId = AutomaticUpdates]
  2008-12-17 02:31:01:265 1248 11 c 0 Agent *.
  2008-12-17 02:31:01:265 1248 11 c 0 Agent WARNING: customer WU didn't search for the update with error 0x8024402f
  2008-12-17 02:31:01:289 1248 74 c to THE > # RETURN # to THE: research updates [CallId = {B8DB0DAA-4B3A-4F8A-8326-3C2E0C426033}]
  2008-12-17 02:31:01:290 1248 74 c# WARNING: reminder of search failed, result = 0x8024402F
  2008-12-17 02:31:01:290 1248 74 c# WARNING: could not find updates with error 8024402F code
  2008-12-17 02:31:01:290 1248 74 c to THE #.
  2008-12-17 02:31:01:290 1248 74 c# end # in THE: research updates [CallId = {B8DB0DAA-4B3A-4F8A-8326-3C2E0C426033}]
  2008-12-17 02:31:01:290 1248 74 c to THE #.
  2008-12-17 02:31:01:293 1248 74 c to THE setting next detection timeout at 2008-12-16 20:31:01
  2008-12-17 02:31:01:294 1248 74 c time of installation to THE adjustment to THE planned at 2008-12-17 09:00

  2008-12-17 02:31:06:300 1248 11 c 0 report REPORT EVENT: {441E306B-86A2-4302-A25E-BCD097906114} 2008-12-17 + 1100 1 148 101 02:31:01:264 {00000000-0000-0000-0000-000000000000} 0 software AutomaticUpdates failure 8024402f from Windows Update Client sync did not detect with error 0x8024402f.

  And I can see that you can not run the System File Checker and verify the disc because that do not have enough privilege to perform these actions. Now you can try to run the System File Checker and Windows safe mode disc, check

  1. turn off your computer.
  2 turn on the computer and when the POST (Power On Self Test) is completed, press the F8 key until you see Windows advance Options menu.
  3. select Safe Mode, and then press enter two times.
  4. connect to your administrator account.
  5. run the System File Checker, and check the disc.

  May I know the results updating form new account?

  Please let me know the results

  Thank you for your cooperation. Your patience is much appreciated.

  Kind regards
  Agung Berbudi
  http://support.Microsoft.com
  From: Jon Afrizal

  Dear love,

  Sorry Agung, I send you many files, because I sent you the wrong file format.

  Best regards
  Jon

  On Tue, 16/12/08, Agung Berbudi
  wrote:

  Dear Jon,

  This is Budi Microsoft's technical support and I will continue to help you on this question, as Ali Will be absent for a week. Thanks for your response and like to update on the situation. Understand that you may have a chance with all the previous suggestion of my colleague. At this point, I will provide you with another work autour for you to try.

  Initially, please send me your Windows Update log:

  Collect the WindowsUpdate.log

  1. Please click "Start", double-click it to open the Local disc c, navigate to the "C:\Windows" folder, right-click on WindowsUpdate.log and choose "copy".
  2 right-click on the free space of the desktop, choose "Paste".
  When the user account dialog box appears, please click "Continue" if necessary.
  3. a WindowsUpdate.log right click on the desktop, choose "send to"-> "compressed file (zipped).

  Please send these zip files to [email protected]

  Suggestion 1: Run chkdsk /r and sfc/scannow

  1. start (Windows Logo)-> all programs-> Accessories
  2. right click on command prompt-> choose 'run as administrator '.
  3. when the command prompt window displays the type

  Chkdsk /r-> press ENTER, let windows check your hard drive error (follow the procedure until its finished)

  Chkdsk /r - check HARD drive and fix errors, locates bad sectors, and recover readable information

  sfc / scannow-> press ENTER, (follow the procedure until its finished) sfc/scannow verifies the authenticity of the file system and replace the files that have been corrupted.

  Please let me know the outcome of these orders and send me the screenshot of it. If the problem persists, you can run the following suggestion

  Suggestion 2: Create new user account.

  1. Click Start and select Control Panel.
  2. click on user accounts and family safety.
  3. in respect of user accounts, click Add or remove user accounts.
  4. click on create a new account.
  5. Enter the name of the account. Select the account type: Standard or administrator.
  6. click on create account.

  more information on how to create a new user account, please check with mentor or refer to http://support.microsoft.com/kb/279783
  If you have any questions or concerns about the information that I have provided, please do not hesitate to let me know.
  It is my pleasure to be useful and I look forward to hear from you.

  Kind regards
  Agung Berbudi

  First I put t understand why post you the history of all email in this forum.
  I put t think that s useful for everyone here

  However, it seems that the guys at Microsoft couldn't t help and that's why it seems that your Windows operating system is really confused until

  If your OS is confused upward then ONLY reinstall new would be really useful and recommended.

  So take your recovery disk and the operating system to restore to the factory settings.
  Then try to update the operating system.

  Concerning

• Error code 646 when trying to install Windows updates.

  Windows updates appear to download but will not be installed.  I tried to go into 'control panel '; Security systems &; then Windows updates.  It checks and concludes that they are downloaded and try to install but won't.   My computer is set to automatically download and install, so I'm never checked to see if they really were the installation so far.  It seems the latest installations of updates took place the 1/11 & 12/01/11.  There has been many failures last year.  Right now, it seems that there are 6 updates important and 6 optional updates that will not be installed.

  I tried to disable my Norton Internet Security and then the installation, but that does not work either.

  Can anyone help?

  Thank you.

  See the following topic for your question

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1c7b1ab1-FCBA-4897-bd36-c766addb0cbf >

• 8 Windows update, error 8007007E on ASUS laptop

  Hello, I have a laptop ASUS bought some years ago - OS is Windows 8.  My system shows windows update is set to update automatically, but for some reason any shows that 'never' and I tried to click on update.  The error message appears in the error 8007007E

  What is the best way to search for the missing or corrupt file and for the correction of a mistake?  If it needs to be updated to 8.1, I worry that I can run into the same error.

  Please advise, help and thank you!

  Pépin,

  Error: 8007007E, occurs if the operating system files are missing.

  Run the System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833>

  Change or restart the service (BITS) Background Intelligent Transfer Service.

  You must be logged on as administrator to perform these steps.

  1. press key Windows + R, type services.msc in the run prompt and press ENTER.

  2 - Click on the service (BITS) Background Intelligent Transfer Service, and then click Properties.

  3. under the tab general, next to startup type, make sure that automatic (delayed start) is selected. If she
  is not, select it and then click on apply.

  4 side of the service status, check whether the service is started. If it is not, click Start.

  Reset Windows update components and check with the question.

  Refer to this link: how to reset Windows Update components?

  http://support.Microsoft.com/kb/971058>

  `~`

• Several updates to install after performing a system restore. Updates must be installed?

  After the system recovery, windows updates shows 64 installed updates. Many have the same title with another date. Should I install all updates or just the most recent version of each update? Is there a certain order to install these updates because there is so much?

  Hi erculb,

  Thank you for visiting the Windows Vista community.

  You can install the latest version of each update. But make sure that you install only two updates

  at the same time and each time you are prompted, restart the computer.

  Some updates apply to files or services that Windows uses. These types of updates can't be installed while Windows is running so you should save your work, close all open programs, and then restart your computer to complete the update process.

  Please visit these links for more information about installing updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.