System File Checker detects files from oembios that cannot be repaired

I ran the System File Checker on my computer Dell Dimension, and he found files that cannot be repaired: oembios.dat, oembios.sig and oembios.bin. The computer has Windows XP with Service Pack 3 installed and was purchased new in December 2002. The original XP installation disk that I've ever used, a SP1 is installed.

Event Viewer gave this message for one of these files after run the System File Checker. "The oembios.sig of file protected system could not be restored to its original, valid version. "The file version of the bad file is 0.0.0.1 the specific error code is 0x800b0100 [no signature was present in the subject.]."

Everything works well, and these corrupted files seem to have no effect on the operation of the computer. I even ran a Seagate hard drive diagnostic test, and it passed. These files, compressed copies that are in c:\i386 and on the installation disc, be repaired and properly placed in their place in c:\Windows\System32?

Thank you, Robert. I tried your suggested solutions.

First, I tried expanding oembios.si_ of the CD on the e drive (CD player) after the reboot. But I got this message from the command prompt: "cannot open the input e:oembios.si_ file."

Second, I tried to develop oembios.si_ of the c drive, where I know it exists in c:\i386. Yet once again, I got the same message that the input file cannot be opened.

This has proved to be a sticky problem. Fortunately, my computer still works well. It is just that I do not have corrupt files hidden.

Tags: Windows

Similar Questions

  • Error: The file has properties that cannot be copied to the new location

    Hi, I have a problem when copying the files in my windows 7 PC to my Sansa clip 4 GB of sport.

    This error appears when I transfer them to any folder on my sport Clip:

    Are you sure you want to copy this file without its properties?
    The file has properties that cannot be copied to the new location.

    I can click Yes or not (when I click Yes, the file is copied to the new location)

    The reason why I ask is the following:
    The file will be somewhat different after being copied on my sport Clip?
    This is a file audio subliminal message to help me overcome some mental problems, so it would be bad if the file is modified after copying...

    The file plays perfectly and sound quality seems very good.
    However, I still need to know if the file is modified in a way?

    The device is correctly detected, but in the manual it says that when you go into my computer and click on the Sansa Clip Sports, you must click on a folder in the internal memory and then you will find a folder of music.

    But it is not at all a folder in the internal memory...

    When I click on Sansa Clip sport, I see these folders:
    Sound, music, audio books, Podcasts, playlists.
    AUDBOOK. LIB, AUDIBLE. LIB, M3U. LIB, MUSIC. LIB, PODCAST. LIB, version.sdk

    Thank you in advance, I really hope that someone will answer you

    The file properties check the metadata associated with the file.  This error occurs generally when the file was created on an NTFS volume and some of the assosiated with this file metadata is not supported on a FAT32 volume. What you mean actually is not associated with file properties, so it would not be changed.

  • Scan of found corrupt files that cannot be repaired by SFC

    After problems with a recent update of windows which was followed by a restore failed, a black screen, then a system repair, I now have a number of corrupt dll files which result in "bad image" error messages when I start applications.

    This does not stop at the launch, but is an irritation!

    I ran sfc/scannow which reports corrupt files that cannot be repaired.

    I have a 'backup' restore point in 2012, if I restored it, it would restore these files corrupt, or the only solution would be to use my factory restore disk?

    Original title: rafeng

    You can have your problem of corrupted files, but do you know why the problem arose in the first place?

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

    Please download and share with everybody fresh copies of your System and your event viewer on your Player Application logs One (formerly Sky Drive) and post a link here. You can delete the earlier copy of your OneDrive records.

    Please download and share with everyone your event to your OneDrive Viewer Application copies of your System and logs and post a link here.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events (the file default evtx type) and give a name to the file. Do the same for the application log. Don't provide filtered files. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:
    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

    http://www.gerryscomputertips.co.UK/syserrors5.htm

  • There was an error opening this document. The file is damaged and cannot be repaired.

    Greetings,

    I searched the forums, and this mistake has been examined in the context of how to treat a damaged PDF file.

    My question is a little different. The company that I am working has a tool to create what we call "knowledge base articles", i.e. product XML authoring with us help topics. They used this tool from 2008. Files can be attached to a topic. The XML files and attached PDF files is stored in a SQL database. Using the TOC Panel or the search function, relevant topics are retrieved.

    When there is an attached PDF, users can view the PDF in the browser or download the file and open it locally.

    The knowledge base has been moved from an environment of database SQL 2005 in Windows Server 2003 and IIS 6 for an environment database of SQL 2008 R2 to Windows Server 2008 R2, IIS 7.

    Now that we have the following problem: in some subjects the downloaded PDF can't be opened and one error

    "There is an error opening this document. The file is damaged and cannot be repaired. "is displayed. The curious is that some PDF files published this error, while others open without a problem. Source file all PDF files open without a hitch before they are downloaded.

    Any advice or pointers would be very appreciated.

    TIA, Donna

    Donna,.

    as you have probably read in a lot of discussions on this matter, this error message is usually correct, and the PDF file is damaged. As for how it gets damaged, it's something you need to know by poking around in your system. Here are a few general things that always apply when working with corrupt files:

    The first thing I would do is open such a file corrupted in a text editor such as NotePad to see what it actually contains. Any valid PDF file must begin with '% PDF -' followed by a version number. If you don't see that in the first line, then you are not dealing with a PDF file and you know why you do not get the file saved in your knowledge base.

    If this string is there, then you know that there a PDF file and the issue is somewhere in this file, and is where it gets much more complex. You will need a good understanding of the PDF specification to parse the file to see what is wrong with him.

    If you're lucky, you'll actually have a file of length zero (which means also no PDF header). No valid PDF file cannot be zero bytes long. Your second chance case would you find in fact an HTML error in this file (instead of PDF content), that tells you the reason for the problem (but again, this depends on your system).

  • I have a license of a vector, but the file is damaged and cannot be repaired.

    I have a license of a vector of Stock and when I import it into Illustrator says "the file is damaged and cannot be repaired." I need to edit the vector in illustrator and import it into indesign. I log off CC and reconnected I know sometimes that's helped before with images but that did not work. At the same time, I also registered 2 images that work well, but not the vector. I have the license of your web portal, not the application, but I don't think that should make a difference. Any ideas on how to get this vector to work? Thank you.

    The number is #50433877. I had to call customer service and they couldn't get it to work either. They ended up giving me a credit and I've used a vector that is similar to the for replace. Strange preview works perfectly, but when I have a license for it, it broke.

  • Adobe PDF stands up and says "the file is damaged and cannot be repaired" works great in IE9.

    Open an Adobe PDF file on this site: http://www.safehaven.com/ and this specific PDF comes up with the "file is damaged and cannot be repaired: JAN30-EUR/USD bearish reversal Pattern triggers in... - MIG Bank.

    It helps if you change the setting 'Always ask' or 'Save file' for the PDF in "tools > Options > Applications" and open the file saved in the Adobe Reader software?

  • want to recover my files from laptop that does not work either

    my hp pavillian tx2500 has a black screen and impossible to repair, and want to know how to copy my files from his hard drive to another laptop. Vista operating system. Thank you!

    Hello

    Saving your files:

    You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

    See you soon.

  • Can I delete system files from Windows.old after format?

    I reformatted my computer recently and I usually remove the Windows.old folder. What I never understood are system files that it contains. Can I remove them?

    Whenever I've upgraded to Windows 7 I reformatted and delete the windows.old folder and files system for Vista and had no problem, but he never did with the same program. So is it safe or should they be not deleted?

    Hello

    Remember there is nothing in the Windows.old folder or its subfolders you need before
    you remove.

    How to remove the Windows.old folder in Windows 7
    http://www.SevenForums.com/tutorials/19151-Windows-old-folder-delete.html

    How can I remove the Windows.old folder?
    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

    How to remove the Windows.old folder that is generated when you perform a custom
    Windows Vista Setup (also Windows 7)
    http://support.Microsoft.com/kb/933212/en-us

    How to remove and delete the folder Windows.old on Vista or Windows 7
    http://www.kodyaz.com/articles/delete-Windows-old-removal.aspx

    I hope this helps.

  • restore multiple system files from Recycle Bin by using the command line

    Hello world

    I ' v done gone wasted with this one

    I downloaded a third party software to delet all files duplicate on my laptop

    unfortunitly I completely forgot I had put all the files in the files of system including visible on partion 1 running windows 7, bye bye file system

    Now, I can't find my installation disk to restore the system files and don't have not one partion factory repair, also I can't start in safe mode with command prompt.

    what I got is windows server 2012 on the partion 2 that works very well

    I found the folder bin recyle for windows 7 opperating system while in server 2012 what I want to do is to restore all the files not only some like fortunately we who will get all my files back in there right posion with fear that the time spent...

    now, there is another way I could restore these files but unfortunitly I don't have enough room in my score didn't do the restore

    I found under the disk management Explorer/properties/previous vertions, but did not...

    appoligies for the bad spelling

    Any help would be appreciated

    Hello

    Thank you for visiting Microsoft Community.

    I suggest you to post your query on our Forums TechNet social as this question should be better there.

    Please refer to the reference to the link below to send your request:

    https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

    Hope this information helps.

  • Can I delete files from disk that I removed just to LR by mistake?

    Hi, this is a really stupid mistake.

    I just deleted 100s of raw files from lightroom, useless stuff that I should have deleted at the time but that he was too lazy to do. I now try to purge all the waste and it takes me days (that's for the past 3 years or so).

    This morning I just deleted several hundred images I went to empty the trash and it's already empty, and it's only then that I realise I was just delete files from Lightroom and not from the diskette. It is several hours of work, is it possible that I can identify now in the folder from the finder that images aren't in the LR, because these are the ones I want to get rid of for good. I don't want to keep them there taking up valuable memory space or restore them in LR and have to do it all again. Help!

    Any advice much appreciated.

    Emma

    Mac OS x 6.3

    Lightroom 2.7

    Emma,

    I would do the following:

    1. YOUR CATALOG BACKUP
    2. Synchronize folders in question (perhaps on the record higher level parent)
      -Uncheck the box 'Search the metadata updated' when syncing
      -Select "import new photos" when syncing
    3. Remove photos ("remove disk") just imported by Synchronize to in LR (from the view "Previous import") after each import (if more than one folder)

    This should remove all images not previously in your catalog, but in your file (s).

    Gossweiler beat

    Switzerland

  • SFC.exe find corrupted system file and confirms the determination of repair at the next startup. but are still present after running sfc scannow new windows 8

    I run sfc/scannow;  results. resource protection finds files corrupted and managed to fix it. System file repair changes will take effect after the next reboot. but after the restart without change, I run sfc/scannow and files are always corrupt

    system not finish booting and stuck at halfway. Also the programs would not open. I had installed some drivers from the Asus download site. before it began. so I uninstalled it, but no help, then I ran the SFC scan who gave me the message about corrupted files, I ran a system restore and everything works although now I have same re installed all the updates except some Akami download which was also offered on the Asus downloads thanks. for your quick response

  • Delete all files from SanDisk that accompanies my Cruzer Blade USB Flash Drive (8GB)

    This is why I asked.

    "Is that correct?"

    Yes.

    However, it is possible that on some PC the SecureAccess app can start automatically when you insert the USB key.  But it can be left and the files on the disc normally use.  It is also possible on some PCs that their anti-malware applications may block the access to the USB because it contains files .exe on this subject.  And some of these applications can be configured to not display any windows gains when they block something.

    Didn't, really, it would be a simple Yes or no answer you did?

  • Deleting files from Archive CC - cannot remove the mobile creation error

    I am trying to clean my cloud storage because I have reached my limits, but it does not remove anything without having the error "failed to remove the mobile creation."  I get this error regardless of what file I'm trying to delete.  I don't know what it is or how to fix for free space on my drive of cloud.  Help, please!

    @nicoleb16277652 - you have a large number of items in the Archive tohttps://assets.adobe.com/files?filter=archive https://assets.adobe.com/files?filter=archive: 2355 files and 1 folder. I am currently getting a list of complete metadata that you have stored but didn't notice the Lightroom Catalog files. You should not use the current CC site for backup Lightroom catalogs.

    We can permanently delete all items in your Archive if that's what you want. Let us know what you would have done as. If necessary I can you email a complete list of what you have stored. My email is [email protected].

    Lightroom and Creative Cloud FAQ at https://helpx.adobe.com/lightroom/kb/lightroom-creative-cloud-faq.html#id_9994

    Can I keep my Lightroom Catalog in the 20 GB of storage space do I get with my membership creative cloud?

    No, you cannot store the Lightroom catalogs in the creative cloud, and you can save a Lightroom catalog on a network drive. You must store the Lightroom catalogs on your computer or on a hard drive connected locally.

  • I have a router Linksys WRT54G, a flashing power LED, and it does not connect what either. I downloaded a bin file from Linksys, but cannot open it. Can anyone help? I try to get another computer running for my children. Thank you

    The router will not connect to my computer. He repeats to me check the connections. They' fine rev.

    Hi Tweetytewe,

    This occurs on cable connections and wireless? If this happens on cable connections and wireless and your Windows installations are fine, you should contact linksys support to receive the best support.

    http://www.linksysbycisco.com/US/en/support.

    I hope this helps. Let us know if you have any questions.

    Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Error opening this document. The file is damaged and cannot be repaired.

    I use Reader 9.1.3 and trying to open this pdf file: http://www.xilinx.com/support/documentation/data_sheets/ds162.pdf and got the error in this message. Other people have been able to open this document, so I don't think that the file is damaged. Any ideas?

    Clear the cache of your browser and try to re - download the file.

Maybe you are looking for