System hangs when starting

Someone had problems with t he laptop freezing on the screen of the Toshiba logo when starting? The only way to turn it off is to pull the battery, no other button works. Cannot, press F2 or F12 or button / stop. No response from either of them. After several attempts, the computer will boot. and run ok. Thinking it might be the motherboard or hard drive, but the two discover ok with diagnostics.

Any thoughts would be welcome.
Thank you
Harvey

My PSA has always been very helpful, but to be honest I didn't noticed this problem on my laptop.

Generally if the laptop freezes during POST (power on self-test) then an error on the motherboard could be detected
Eventually he s RAM related question
If the RAM is faulty or malfunctioning, then the laptop could freezes

Try an other Rams. Maybe it helps, if not, then a motherboard must be verified

Tags: Toshiba

Similar Questions

  • Windows XP Pro. Svchost use 100% system resources when starting. What is the purpose of svch.exe?

    Windows XP Pro. Svchost use 100% system resources when starting. What is the purpose of svch.exe? RWM

    Hi r_miller,
     
    Follow the suggestion given in this article to resolve this problem:
  • C000021a error: {fatal system error} when starting laptop PC M30 series

    I get the following error when starting my laptop.

    "Stop: c00021a {fatal system error} the windows logon system process ended unexpectedly with status 0 x 00000080 (0x00000000 0x00000000).
    The system was stopped.

    I have the CD of restoration at the time of purchase. I have some data I need to recover. If someone knows the resolution of this problem, please let me know the procedure.

    Thanking you in advance.
    -YG

    Hello

    I found an interesting page. Please check all the solutions mentioned on this page. http://www.eggheadcafe.com/NG/Microsoft.public.WindowsXP.accessibility/post652591.asp

    Good luck!

  • I recently installed PowerDesk Pro v7.0.1.3 and now, the system hangs when you right click to copy a folder, etc.

    Original title: Windows Explorer has stopped working

    My computer is running XP Home Edition Sp3 and using Norton internet security 2011. I recently installed PowerDesk Pro v7.0.1.3and now, the system crashes when you right-click to copy a folder, etc. I read on this forum of a person having a similair problem and being referred to this site offering a patch that seems to not be available:

    http://KB.avanquestusa.com/Al/12/1/article.aspx?Aid=4030&Tab=Search&BT=4&r=

    Marilyn answers Support Engineer Microsoft's answer also suggested maybe using some registry changes, which I'm not comfortable with because of my limited experience.

    Any suggestion would be greatly appreciated pedro147

    None of these suggestions to the Microsoft support technician will help you, but they will consume large amounts of your time.

    Please post a link to this Marilyn Microsoft engineer answer Support responses involving some registry maybe going to I can see that too.

    Older versions of PowerDesk Pro 7.x are known to cause explore crash, so that the sounds on the right.

    The current version of PowerDesk Pro is 8.5.

    You might be able to get the old version to behave by disabling PowerDesk one shell extensions at a time until when you right-click Explorer no longer crashes.  This will leave you with limited functionality of PowerDesk since those afflicted extensions will be disabled, but you should not have these extensions to do anything, you need to make sheets.

    I would start with the PowerDesk ZIP shell extension (I already know about this one).

    It is a version shortened and changed my notes on the use of ShellExView (since you already think sheets):

    Download ShellExView here to see what Explorer extensions you have loaded:

    http://www.NirSoft.NET/utils/shexview.html

    ShellExView does not install anything on your computer, simply of runs and displays.

    After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

    Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

    Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

    You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.

    For example, you could Google something like:

    Explorer XP crashing (you must fill in the name of add your suspect on.)

    See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

    Right click and disable Microsoft no suspicious extensions one at a time take a list so you can enable them again later if you wish.

    The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know which extension is the culprit, then you can start to enable them one by one until the Explorer fails again.

    Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

    Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.  You can then start to reactivate other extensions to zero on the extensions that are causing your accident

    If the cause of the accident is a third party application or program, their may be a later version of the program available that solves the problem.

    If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

  • System hangs when you work on Foxprox 2.6 for DOS

    hanging system

    I work in foxprox 2.6 for dos. My foxprox program hangs when system os on snare for one or two seconds how can solve this problem. the system is active and only the program hangs.

    Hi Maury,

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the MSDN forums. Please ask your question in the following forum.

    Visual FoxPro general forum

  • Original title: System hangs when you open Add/Remove programs

    Original title: System hangs

    Windows XP crashes each time I have open the control panel and try to view add or remove programs (it also crashes in safe mode). He locks also after has been idle for a few minutes. I tried selective startup mode and the shutdowns continue to be committed. All the screensavers and standby/hibernation modes are turned off. I ran the diagnostics and only met with a 2000-0146 error code. Any other ideas out there?

    I was finally able to save all my data and was able to reformat my existing hard drive. I also reinstalled XP SP3. I finally got all the drivers reloaded and have reinstalled virus protection. So far, everything seems to be back to the standard...

  • Photoshop cs5.1 hangs when starting

    My cs5.1 photoshop freezes in reading preferences when starting.  I've tried resetting preferences, did not work, tried a new installation, it freezes again... help?

    Solve problems of launch | CS6, CS5.5, CS5

  • System hanging when I click on the stop button on the start menu

    Hi everyone I use win xp professinal in my laptop of dell (Dell Latitude E5410) for a few days, I get some problems as when I click the button turn off in menu start my laptop get hung up and not unresponsive for 5 to 10 minutes due to problems of this I have every time with force shutdown my laptop. I also contacted with dell support they talked about some diagonstic even tests I did the test of all the problems is always the same and finally they told me that you must format your laptop, but I don't want to format my laptop because I recently bought this laptop with Genuine windows pls help me what should I do

    Thanks in advance

    Glance in the log events for possible clues.

    Install the Profile Hive Cleanup Services user

    John

  • Win XP Pro SP3 hangs when starting.

    My copy of close to ten years of Windows XP Pro served me well... it has been updated a number of pious UN time (and that was just the first few days after I first bought!) is the current state of the SP3.  I've never had a problem with the start of the BONE, until two days ago.  He simply refused to start.  There had not been updated, there had not been any virus, (Norton 360 first version 5, SpyBot Search and Destroy, AVG Security Suite Pro) full... it worked and works well, I stopped him and when I went to restart, it is hanging in the first screen of Windows XP (black one who lights up for a few seconds and scan blue dots everywhere under the name "Windows XP").

    I was able to restart in safe mode, no problem.  I then went through all the lists of things to try that I could find on here and any other support area of Microsoft.  Clean boot didn't work, start diagnosis does not work, no matter how configure msconfig, the result was the same. hang in the first XP screen.  I found an article that said to use the Windows installation disc and do a "set up"... essentially replace the operating system without affecting any of the other programs or data on the disk.  I did this, and of course, it still hangs on the first XP screen.  The kicker is NOW, I can start is no longer in safe mode, because it comes in saying that it is a 'NEW' XP installation and as such must be activated before first use... and because activation cannot be done in safe mode, please restart the computer in normal mode and proceed with the activation...

    IF I COULD START THE COMPUTER IN NORMAL MODE, I WOULD HAVE NOT HAD TO REINSTALL THE OPERATING SYSTEM AND SHOULD NOT ACTIVATE OR HERE BEGGING FOR HELP!

    Hi RonaldHaywood,

    It looks like the Windows XP installation is damaged and that the only option is to reinstall Windows XP on the computer after saving the data.

    You will need to take the computer to a store local tech to save data and then perform the clean installation.

    Install, reinstall, or uninstall Windows

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  • Firefox hangs when starting

    Firefox worked fine until a few days earlier.
    Now I can't start at all in Firefox even in Mode safe.
    As soon as I click to start Firefox, I get the journalist Crash whenever I try to start Firefox.

    My Crash ID: bp-1bb519d8-ea46-4cdf-85b5-ac3312151004

    Crash report:
    AvailablePageFile: 4136968192
    AvailablePhysicalMemory: 1582690304
    AvailableVirtualMemory: 4137361408
    BlockedDllList:
    BlocklistInitFailed: 1
    BreakpadReserveAddress: 336920576
    BreakpadReserveSize: 67108864
    BuildID: 20150929144111
    CrashTime: 1443976420
    E-mail: [email protected]
    InstallTime: 1443911622
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: press release
    Safe mode: 0
    SecondsSinceLastCrash: 85
    StartupTime: 1443976420
    SystemMemoryUsePercentage: 59
    Ramjet: 1
    TotalPageFile: 7892844544
    TotalPhysicalMemory: 3947364352
    TotalVirtualMemory: 4294836224
    URL:
    User32BeforeBlocklist: 1
    Seller: Mozilla
    Version: 41.0.1

    This report also contains technical information about the State of the application when it crashed.

    Hi kteinc, looking at this report, it seems that this may be caused by external software on the computer. go to control panel of your system and remove any software marked 'Freecorder"or similar, or by the Publisher"Applian Technologies"or any other toolbars.

  • Satellite A200 PSAE7E: Win XP hangs when starting

    It's happened several times.

    At the start, at random, all in one shot a blue screen appears (critical error) and the system restarts.
    I was not able to read what is causing the problem.

    Someone had the same problem?

    Solutions?

    Thank you, JP

    There is no magic solution to such problems. BSOD can be caused by different things, but I assume that, in your case, it is caused by some software. Have you installed third party software?

    If you know the day when it happened for the first time try to roll down the operating system to an earlier time using System Restore tool.

  • system hangs when you sit online game

    my computer crash after going on the site of games pogo tigerwoods online ect.it visit it tell me to download the Shockwave already play.that install. It will not start back upward for at least 10 minutes when crash or IE7 stop answer on game tigerwoods EA.com .i have ran spyware malware progam used fix it .cochez all my settings still no fix.

    Moved from feedback Forum to repair the Windows and system recovery Forum.

    Hello

    1. What version of Windows are you using?
    2. Faced with this problem while playing games online?
    3. You get an error message when the computer goes down?
    4. Are you having the same problem if you are browsing Web sites?

    I suggest you send more information to help you better.

  • HP 6530 b hangs when starting

    Hi all!

    I have a HP 6530 b hanging while I'm trying to start. Basically what happens is it starts to boot and then it stops. I got Windows 7 Pro 64 bit installed with a Linux 12.04. I was doing my job on the computer a few days when it shut itself down, without warning. The screen will not suddenly goes black, but it was as if I had told her to stop, that I did not. As he was closing down, there the screen on the fact that she had installed updates. Anyway, it restarted itself and it could not boot into Windows. It got to the point where the Windows Logo appears, but it froze right there.  I waited for about 20 minutes to see if she would do anything, which he did not. Tried to restart that and it froze before he even got the Windows Logo. Now, it happens on the screen that indicates that Windows could not start and needs to be started in recovery mode. I tried and it failed too. I could remove the hard drive and connect it to another PC and starts very well under Linux, he said that the installation of Windows has been damaged. From what I can deduce, I think I can give up this install of Win7, but I can't understand what is causing the PC to hang during startup. any suggestions are appreciated.

    Thanks for the advice, but I already understood that the motherboard is bad. Thanks anyway!

    -DogLover

  • [Personal information deleted]: Support HP support hangs when starting the

    On HP Support Assistance to start up, I get this message.

    Whenever I click on 'OK', it is on this same screen.

    I had this problem until I upgraded to Windows 10 (upgrade to Windows 10 July 30, 2015) and I guess it's never resolved. I thought he would go himself after a few reboots but unfortunately that was not the case. It was a bit difficult to find my information to computers because I didn't want to remove the battery. I also do not have a tag on the bottom of my laptop. Never came with one when it was purchsed. Is it possible that I can have this problem? Help, please. The system is going on 3 years, wifi, replaced card, fell (but it's been a great soldier!), hinges replaced, battery sealed with a tape or paste will fall due to a fall and hinged battery broken, battery is in the descents, & scratches little couple on the screen but nothing major. To use the computer for school work until I graduated in may 2014.

    Ms. Gettings

    Hello @gettingsb,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I read your post on the HP Support Assistant and wanted to help!

    For starters, can you provide me with the number of product of your laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

    In the meantime, please consult this document, to see if the problem can be solved:

    HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

    Please let me know if this information has been helpful by clicking the thumbs up below.

    Have a great day!

  • Pavilion TX2623: Laptop hangs when starting Windows

    Hello

    When I start the laptop, I see the HP logo, the blue window of Microsoft and the white dots turning in a circle and then everything freezes after 5 seconds or more. If I force the power off I can restart without problem. At the start, I can hear the fan, player and I see that the player accesses (blue led).

    I tested the memory and the disk with tools (diagnostic) which you can access from the start. The results were very good.

    I did a hard reset, search the forum for similar problems.

    What bothers me is the fact that force a shutdown will lead to a normal start. For several days, the model has been the same. Computer hangs at the first attempt, I force shutdown and then everything works fine.

    Any idea?

    Concerning

    I managed to find a solution.

    It seems that the fast start feature is at the origin of the problem. I turned he took and no more freezing, at least so far (several departures and stops without problem).

Maybe you are looking for

  • Disk drive does not

    My computer is a windows Vista. It is supposed to work for games designed for windows vista, but only a FEW old games working on it. 'Games for Windows Vista' work either, it just cannot read the disc, as if this isn't in the drive at all. This also

  • Can you buy XP Professional without having to purchase the product code

    I'm attaching to re - install xp professional without having to buy a new product code. You can buy new xp or you can buy a thing of recovery?

  • Capricious monitor problem

    My monitor does not work unless I unplug it and a plug, I have Windows Vista. Vista load upward (I hear it in the background!) but I have a black screen.  Then I have to unplug the monitor, plug it in again and it manifests as usual.  This problem st

  • Remove the KeyStore security prompt

    Hi all Can someone tell me please how to eliminate security prompt whenever my application tries to access a symmetric key. For example in this method I am delete all the keys present in the keystore: /////////////////////////////////////////////////

  • can't download app

    in my store can't downlad