system is unable to make a successful restore operation. Get an unspecified error msg.

Similar Questions

• When I try to use the system restore I get an unspecified error response

  Original title: 'all programs, accessories, SYSTEM RESTORATION tools'

  Recently, when I try to use system restore, I get an unspecified error response he has worked in the past. How can I fix it?

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• You try to run the system restore and get this error__unexpected error filename directory or volume label syntax incorrect (0x8007007B) __What can do?

  Try to run system restore and get this error
  error unexpected filename directory or volume label syntax incorrect (0x8007007B)
  What can I do?

  Hi Larry Bogie.

  1. you receive error message when creating point system or performing system restore?

  2. did you of recent changes on the computer?

  Usually, this would happen if there is any place in doubles in the system restore properties.

  To set the path of the appropriate Windows Vista restore point as follows:

  (a) click on the Start Menu.

  (b) type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.

  (c) click continue.
  The System Properties window appears.

  (d) click the System Protection tab.

  (e) to the automatic restore points, uncheck the any location invalid or duplicate

  (f) click to check drive C: with the Windows Logo.

  (g) click on apply, and then click Ok.

  (h) restart the computer and check if it works.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I am trying to burn a DVD using Movie Maker, but every time I burn it to disc, what happens at 60%, then all I get is "unspecified error cannot burn the disc?

  I created a movie after the import of videos and images, first after their conversion to Quicktime version to a version that would play in Windows. I made the movie and it plays well in Movie Maker and starts ok when I burn to disc, but happens about 60% each time and then just says it cannot create disc because of an unspecified error. So, I don't know what I have to do? Any help? Thank you.

  It may be interesting to try to publish (save) the project of a
  folder on your drive hard in the. Film WMV format.

  If it works... then import it. File WMV in DVD Maker.

  The following articles explain how to save:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• My Favorites are lost and Firefox can not restore from backup with this error msg "Unable to deal with the backup file.". Someone please help.

  I use Firefox 12 on my Macbook Pro, it crashed and when I rebooted, all my favorites have disappeared. When I tried to restore from the backup files, he returns with "Failed to process the backup file." Someone help please I would have lost years of bookmarks.

  Thank you

  Hi guys,.
  I also experienced this problem and based on the previous explanation in one of the threads here I got the following article - http://kb.mozillazine.org/Unable_to_process_the_backup_file_-_Firefox

  I myself have deleted only the file places.sqlite and places.sqlite.corrupt from the profile directory and was able to import my favorites since the backup file successfully.

• System restore failed during restore the registry from the restore point. An unspecified error occurred during the restoration of the system (0x800703f9)

  Well, all I can say is I tried to use the tool of restoration but always have the same answer, cannot perform the task. I wonder what to do because I opened the registry editor to see if something I did that intrigues, restoring the system but found nothing. While it would be!  Thank youvery much!

  Hello!

  You have published in the Forum in Portuguese. Take your questions on the specific Forum in your language.

  Even more.

  Elton Reis

• Unable to make the point on security, get error 0280070424

  How can I fix my update on security? tells me that it is something to do with the 0280070424 proxy server error code

  Hello

  1. don't you make changes on the computer before this problem?
  2. the updates you are trying to install?
  3. What is the full and exact error message?

  In response to the questions above could help us help you better.

  See: How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues

• When I try to do a restore I get a disc error message

  He suggested that I run a disk check, but when I try to annex anything that happens on statrtup. Same thing when I try to make a backup disk

  Hello

  • What is the full error message that you receive?

  You can help solve some computer problems and improve the performance of your computer by making sure that your hard disk has no errors.

  1. Open the computer by clicking the Start button , and then clicking computer.

  2. Right click on the hard drive you want to check, and then click Properties.

  3. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

     To perform a full disk check, select search for and attempt recovery of bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

     To check for errors file and the physical errors, select automatically fix file system errors and search for and attempt recovery of bad sectors.

  4. Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

   

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• Suite error msg popsup: Sync has encountered an error during connection: unable to connect to the server. Please try again. I tried 446 times and keep getting same msg have stop computer and firefox and get the same error msg have a mac desktop compute

  nothing to add

  Hello!

  It seems that you do not use the latest version of Firefox. Please update and try again: http://www.mozilla.org/firefox

• System Restore indicates an unspecified error has provisioned & you files have not been changed?

  When I try to use the system restore, I get this error as follows... (an unspecified error has provisioned & you files have not changed) I get this same error even using different activation & restore points. I don't know how you can even get an UNSPECIFIED error, seems to me if a mistake has provisioned & he knows it's a mistake he would know what is the error. In my opinion, this error message no sense at all... I'd be happy to hear this error message explained or all thoughts. Thanks for any help...

  Kind regards

  Dale

  Hello

  happy to help

  Norton is the main problem

  Thanks for the reply

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• "Unable to connect to the printer operation was not successful"

  I use the operating system Win Xp I have the WiFi network and I can't connect to any shared printer on my computer. She has a massage error like
  "Unable to connect to the printer operation was not successful"
  Can you please help me solve this problem

  Thank you
  Ramil

  Hi RamilAnuja,

  ·         This is the first time that you connect a wireless printer?

  Method 1: See if you follow the steps as suggested here.

  Microsoft Windows XP - to connect to a printer on a network

  Method 2: Check to see if this article helps you.

  How to set up a wireless network (WLAN) in your home

  See also:

  Microsoft Windows XP - overview of network configurations

  Printer in Windows problems

• During the restore system to a previous restore point, I got this error 'access denied 0x80070005.

  original title: 'access denied 0x80070005.

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  During the restore system to a previous restore point, I got this error "Access denied 0x80070005" Any Solutions?

  Possibilities:

  1. you are not the administrator. You don't have to enter the admin password valid when he asked for it.

  2. you probably have the problem with the infection by the virus.

  If you ARE the admin, suggestions:

  a. run a full scan.

  b. If the machine is clean, do your Safe Mode system restore.

  How to go in safe mode?

  Restart > immediately and repeatedly tapping the F8 key until you see a black and white scree > top? Touch down arrow, and then select Safe Mode > Enter > now that you are using safe mode. Make your system restore.

• wwhy does keep system restore with the message "an unspecified error occurred during system restore.

  Any date, I chose, whenever I try a system restore, I always get this message-"an unspecified error occurred during system restore", why?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• an unspecified error occurred during system restore whatever that means and what should I do?

  Arisen from the usual Windows, "you want to run windows restoration", after a crash and restart on "restart Windows normally. Then got the

  message "system restore was not successful, your computer's system files and settings were not changed.
  Details:
  An unspecified error occurred during system restore
  Tried a restore point different and got the same message.
  Any help gratefully received
  (Although - we pay enough for it - he should bloody works - all the time!)

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.