System not start normally and unable to run chkdsk and system restore.

Similar Questions

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• Computer will not start normally - boots to the BIOS boot screen

  Hi, today I had problems on my computer and it will not start normally upward. This started happening today. When I turn on the monitor, the HP logo appears on a blue screen (as usual), but then, there are a lot of vertical white lines grouped perfectly on the screen (it's never happened before) he started to arrive yesterday. and when I try to start it, there is just a black screen for a long time and sometimes the system recov appears but it takes SO long to finish so I just stopped and went into safe mode and did a quick scans with Malwarebytes, MS Security Essentials and SUPERAntiSpyware, but they are all come clean except SUPER which came with a few things from tracking cookies...

  Today, I have scanned a full scan with malwarebytes and it says that there is no infection.

  can someone help me? I'm at the library atm! Thank you!

  Picture of the blue screen with lines here: http://img638.imageshack.us/img638/8583/post1278441253416372.jpg

  also - im wondering how to start with recov disks? I have two drives but only as on slot dvd thing and I know to start upward with her? should I boot with it because the layout is a little down? and I don't have an installation disc windows vista then Yes.

  Thank you very much!

  Hello Winston,

  According to the image that you posted, it seems that the blue screen is a blue screen with the HP logo on the subject.

  If this is the case, then the machine has not yet reached Windows and is suspended in the machine Power On Self Test.

  My recommendation for this scenario is to contact HP about what there is something at the level of the material / process/firmware BIOS which prevents the machine to get it to start Windows Vista.

  Let us know what they have to say.

  Best regards

  Matthew_Ha

• Windows 7 does not start normally.

  Windows 7 does not start normally.  The Startup Repair tool will not fix the problem and restore the system to the restore point further did not help either.  I ran a Windows Memory Diagnostic, and he says that he has no problem.  I started the system in Mode safe, everything seems to work fine, but I can't seem to find something that will solve the problem and allow Windows 7 start in Normal Mode.

  In Safe Mode, try setting up Windows for "clean boot".

  http://support.Microsoft.com/kb/929135

  Follow step 1 to clean boot, and then see if you can start the computer in Normal Mode.

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• XP does not start normally. Must use the F8-last known good configuration.

  For the last three days, XP does not start normally. I use F8 and you select last known good configuration that worked. It gets old. If I try to boot normally, it freezes on Autontfs not found I have a MSI wind Pc with Windows XP Service Pack 3.

  Hello Susanherna,

  The last known good configuration is created during the logon process. This means that something has changed between the time that connect us and time that shut down us the computer.

  At the next startup, select instead of last known good configuration safe mode.

  We want to then try a clean boot.

  The following articles describe this process on Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Let us know what are the results of this and we will continue from there.

  Best regards

  Matthew_Ha

• My Windows does not start normally. I can't get past the "Welcome".

  My computer or my windows does not start normally. I can't spend the 'welcome' after that I put my password!

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Method 3:

  How to resolve performance issues during startup in Windows Vista

  http://support.Microsoft.com/kb/950684

  How to troubleshoot performance issues in Windows Vista

  http://support.Microsoft.com/kb/950685

• Windows - (various) corrupted file errors. Unable to run chkdsk. Windows XP Home Edition

  Hello

  I hope someone can help me with these error messages; which seem to vary what I do on my computer.  First error message is Windows - file corrupted the file or the directory c:\Program files Symantec Shared Shared\EENGINE\EPERSIST common. DAT is damaged and unreadable. Please run the chkdsk utility. The second error Google Update.exe - corrupted file as the c:WINDOWS\Temp\GUR2.tmp file or directory is corrupted and unreadable. Please run the chkdsk utility.  Unable to run chkdsk by using my computer or command prompt.  System message - cannot open volume for direct access or CHKDSK cannot continue in read-only mode.  Running fsutil dirty query c: Volume-c: is dirty message.  I also have experience from time to time a process loop at startup where the computer keeps turning off and then restarting.  Thank you

  Hello

  ·        Since when are you facing this problem?

  Method 1:

  You can run the check disk by booting in safe mode and check if that helps. To start in safe mode follow the link given below.

  http://support.Microsoft.com/kb/315222

  Once you start mode without fail, try and run the disk check and check errors.

  Method 2:

  If you are not able to run the check disk in safe mode, you will need to boot into the recovery console, and then run check say. To do this, you need the Windows XP installation disc. The enforcement procedure checks the disk in the recovery console.

  (a) Insert the Windows XP CD-ROM into the CD-ROM drive and restart the computer.
  Note: Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.

  (b) when the "Welcome to Setup" screen appears, press R to start the Console history.
  Note: If you have a dual-boot or multiboot, select the installation that you want to access from Console history.

  (c) when you are prompted to do so, type theAdministrator password. If the administrator password is blank, just C:.

  (d) to historic Console command prompt, type the following then C::

  Chkdsk /r

  (e) allow to run INTACT until the completion

  (f) report any error

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista does not start. I tried to run the Startup Repair tool and we have tried to select start Windows normally.

  original title: URGENT

  How to start Windows Vista when 'Launch Startup Repair' or 'Start Windows normally' did not work? I want to avoid the deletion of my data.

  Hello

  for starters, the info you received a DVD of windows 7 repair vista usage are BAD

  you need a DVD vists or a vista Startup Repair disk repair vista

  and you can NOT do a repair installation of booting from a DVD in vista

  Repair facilities are on within an operating system

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If necessary

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Receive error messages: E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS DAMAGED AND ILLISIBLE and unable to run CHKDSK at startup

  Original title: corrupt master file table pleae help

  Hi all I have a problem I hope that someone can help me with
  first of all, I have a toshiba satellite laptop computer running windows vista.i have 2 drives c: and e:
  c being the main one with windows and e being the backup and where I put a lot of my files, movies, etc.
  IV had no problems atall and then I went to the E drive access yesterday and first had it that no info under the drive icon does say just LOCAL DRIVE E:
  When I click on it I get this message E:\ IS NOT ACCESSIBLE THE DISK STRUCTURE IS CORRUPTED AND UNREADABLE
  I tried to run chkdsk at startup and cmd prompt and I get this message "corrupted master file table.
  cannot recover master file table chkdsk abandoned... " Device Manager sees no problem. Event Viewer, says "the file system on the disk structure is corrupted and unusable. Please run the chkdsk on the E: volume utility. »

  I have a lot of files on the drive I want to lose.can someone give me advice on how to solve this problem, I hope iv gives you all the info you need. Thanks in advance

  Hi helzf,

  You can try to run a Checkdisk on drive E to fix disk errors that can cause this problem. You can make a backup of the data on this drive and try to run checkdisk.

  Check out the link:

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Hope this information is useful.

• laptop HP Pavilion g7: pc does not start correctly and wiped the system administrator account

  The system failure. Was not properly closed. Now ask system administrator password but erased or has no listed listed system administrator account. So I can't enter my password and the pc will not restart correctly. I want to run a system restore but can't! I am stressed beyond my capabilities and am ready to lie down in the dirt and the scream. Please help me!

  Hello

  You're more than welcome, and I'll keep my fingers crossed that he finished restoring Ok

  Kind regards

  DP - K

• Computer will not start normally, in safe mode or from the recovery disk - stays on the Green loading bar of microsoft

  I got to my computer today and there was a blue screen with white writing about him say a word on the internal discharge. Then later in the day, the computer froze, after a while the screen went black with just the cursor on the screen. I restarted the computer and now it just does not start. In normal mode it gets as far as the loading screen Windows with the movement of green bar but stays on it indefinitely. If I try to start in safe mode it gets as much as crcdisk.sys and then crashes, and if I try to boot from the Vista recovery disc, it also only gets the windows loading green bar and stay on it. Any help on this would be much appreciated. Thanks in advance.

  Hello

  What is the full error message?

  Follow the suggestions and see if it helps.

  Method 1

  I suggest that do you the Startup Repair through the system recovery options with a Windows Vista installation disc.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2

  I suggest that you perform the system restore from the system recovery options with a Windows Vista installation disc.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 3

  Perform the disk check via the system recovery options with a Windows Vista installation disc.

  a.Select command prompt.

  b.Type chkdsk /f and press ENTER.

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Windows does not start normally after Windows Update

  My computer does not seem to start more. Whenever it starts, it makes to the 'Starting Windows' screen, and then my screen goes black. My primary monitor does not receive a response, but my second monitor stays on until the computer restarts again. This happened last night after that my computer shuts down for the first time in a few weeks to install windows updates from July. I had updated windows to try to fix something with iTunes, which might have something to do with my problem. My computer was not showing any other kind of problem before that.

  Here are some other details:

  * I use Windows 7 Home Premium (Microsoft Windows Version 6.1.7601)

  * Windows does not load with normal settings but will load in safe mode.

  * System Restore never works in the system recovery (a non specifiederror occurred during system restore.) ((0x800700b7))  and sometimes says it works when I do it in safemode, but solves nothing. Yes, I tried using different restore points.

  * I think that my roots of the problem in the fact that I tried to restore my phone, but the computer could not install the drivers correctly.

  * Startup Repair does not detect it.

  Attempt to sfc/scannow in command prompt returns two different answers: "there is a system repair pending whice requires the restart ends.» Restart Windows and run sfc. "during the attempt to system recovery and" Windows Resource Protection found corrupt files and managed to fix their. " Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log"in Safe Mode with command prompt.

  I apologize if my description is a bit vague, but I need some urgent help with my computer. I tried all the solutions I've come across, but the same problem persists.

  Hello

  Sorry for the delay in response.

  Your problem has been resolved. Let us know if there is not, and we will be happy to help.

• Could not start Rescue and Recovery

  I have Thinkpad SL500 with vista 32 bit on it.

  I have an urgent problem with Rescue and Recovery of departure.

  When I run the program, it does not start!

  Please please advise on this.

  Kind regards.

  Yes, you can use the recovery disk to install the operating system.

  Best regards

  Tanuj

• Check the disk does not start if he had to run when you restart the computer.

  I selected automatically fix system errors file and Scan for and attempt recovery of bad sectors.
  I was prompted to reschedule the disk check for the next time you restart your computer. 

  However, when I rebooted my computer, nothing happened. No disk check has been performed. I tried tha procedure above a couple of times without success.
  
  
  Someone please help I was able to do this before, but can't do the job now?  Thank you.

  ACHOIWONG,
  Well, it's system files to discover good good news.  Is probably why chkdsk does not work due to not having permission start upward.  Try to run it from an elevated command prompt:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type chkdsk c:/r

  Try and let us know if it works.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.