System of ping by using the e-mail

Similar Questions

• How can I change my birth date in Windows Live Hotmail profile because I mistakenly put 2011 instead of 1970 and now I can use the e-mail due to parental control?

  How do I change my date of birth in the profile because I mistakenly put 2011 instead of 1970 and now I can use the e-mail due to parental control?

  Hello

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://windowslivehelp.com/product.aspx?ProductID=1

• Cannot receive or send mail using the Windows Mail get 0x800CCC18 error number

  How can I fix the problem?
  Cannot receive or send mail using the Windows Mail get 0x800CCC18 error number
  Windows mail was working fine until about 2: 30 EST 2011-12-14 and tried to send an email and got the above error msg.

  Check with your mail service provider to make sure that there is not an intermittent interruption of service.  If you have webmail capabilities, you can also check.  Otherwise, compact and repair the database (www.oehelp.com/WMUtil/) and if that doesn't help, remove your e-mail account, close and reopen WinMail and then add it back back.  Also check 3rd party program interference such as antivirus software (see www.oehelp.com/OETips.aspx#3).

  Steve

• do I have to pay to use the electronic mail of microsoft

  I have to pay to use the e-mail from microsoft, because when I click on the email address on the website somebodies, e-mail Microsoft comes back for me to use,

  Moved from the community involvement Center

  Subscription to Office 365 home or Office 365 personal are not free, but access to the web site http://www.outlook.com/ is free. 365 Office Home and Office 365 Personal use Outlook.com to host the mailbox, but membership gives you the right to install and use Office 2016.

  There is also a service called Outlook.com without advertising. This, too, uses the Outlook.com free mail service, but at a cost of about US $20 per year, gives you some advantages compared to the free version of Outlook.com, which is that Microsoft does not all ads on the web page of the mailbox.

  So, it would seem that you have one of these subscriptions. Only you can know that.

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• How can I have 2 email accounts open at the same time using the apple mail icon?

  How to open 2 e-mail accounts at the same time?

  Hello carroll12,

  Thank you for using communities of Apple Support.

  I see that you do not want to open two e-mail accounts at the same time using the Mail application. I understand perfectly. I have multiple e-mail accounts set up in my Mail application. I'm happy to help you with this.

  You can have more than one e-mail account set up in the Mail application. The first time you open Mail, it may prompt you to add an e-mail account (if you have not already done). Select an account type, and then enter your account information. To add another account, choose Mail > add an account, select an account type, and then enter your account information. Make sure that the Mail check box is selected for the account.

  If you have already both set in place, and I just want to be able to view both on the screen at the same time, open Mail, and then click file at the top.  From there, select the option for the new window of the observer.  This will open a new window where you can see each of the individual mailboxes on the same screen.

  Have an amazing day!

• After the crash of the HD and reloading of Gmail and Thunderbird using the e-mail as before POP now, random messages on the Gmail server does not move to Thunderbird.

  I think it's all said above. Always use POP e-mail to move my Gmail to Thunderbird and it worked perfectly. Now apparently rec emails at random would be in Gmail server do not move to Thunderbird. Most do, some don't, and it seems so random.
  I checked all the settings I know and it corresponded exactly to the configuration I have on another computer set up with the same POP mail/thunderbird configuration, which continues to work perfectly.
  Any other explanation than switching to IMAP which I don't want to NOT do?
  Win7 64, laptop Dell XPS 15Z
  Thank you is advanced.
  -Neil

  Both computers have POP accounts? With POP by default is to remove the messages from the server. So the other computer can simply be faster from time to time and pick up the message first.

• Satellite L40 - 18Y: corrupt system files - how to use the recovery partition

  Greetings,

  One of my friends bought the Bulgarian electronic Toshiba Satellite L40 - 18Y (PSL48E) from a major retailer and insists on the fact that it came without any CD, but the first time he installed Vista.

  After that some of his other friends have uninstalled Vista and XP for unknown reasons (he says that some drivers and patches were necessary to make XP work properly, I think he might have something on LBA48 and SP1).

  In any case, installing XP died, and the disk share is the file system is damaged.
  After I removed it with gparted I have two disk actions now.
  1st row in the table to partition: ntfs share labeled WinRE (no hidden bootable)
  (He has a stash of file RavMon.exe and autorun.inf which implies that damage to the installation of XP are perhaps caused by a virus)
  Second row in the partition table: empty (installation of XP was)

  Third row in the table to partition: ntfs share with data

  The problem is that the first partition unbootable and act like partition recovery, even when I toggle the boot flag.

  It is all recovery partition and how I should go?
  I read in some messages if you press '0' when the computer starts the Bios it will start automatically, but it did not work.

  A manual which was available for download for this model on Toshiba Support site the key has been specified as F12. It didn't work either.

  I'll be very grateful for directions, solutions or ideas.

  Hello

  There is perhaps a little change to reinstall Vista with the HDD recovery procedure.
  Please check if it would work.
  -Turn on the laptop and press F8
  -Check if there is an option called fix my computer
  -If so, select it, and then choose the last option called Toshiba recovery.

  But to be honest I don t see the chances it would work because you have already removed the Vista from the HARD drive.

  You must have read the user manual before deleting the Vista.
  The manual (Chapter 3), said that if the recovery DVDs has not been handed over with Notepad then you create the DVD using the Toshiba Recovery Disk Creator (is was also preinstalled). The user manual also describes the above HARD drive recovery procedure.

  However, the recovery DVDs can also be ordered here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• How to set system for Veristand mappings using the API

  Hello

  I'm doing a VI that would map the channels system for me within a Veristand system definition file. I have a certain mappings to do and many of the names of ports are repetitive, so this should be easy to implement. I have attached photos of my attempt below. The Panel displays the results. The indicators get Sources and Destinations show mappings that I did inside Veristand himself.

  I used the block of EEG channels in LabView to check the structure of the path and you can see on the indicators to get the Sources and Destinations is that they are correct.

  I intend to throw this in a loop and incrementing number to all my connections.

  Thanks in advance,

  Brent

  I wrote a very similar code and it seems to properly configure the mappings for system for me as long as I have the definition file closed during execution of the VI system.

• UDP COMMUNICATION FROM ONE SYSTEM TO ANOTHER BY USING THE TYPE CAST

  Dear reader,

  I tried a simple communication udp from one system to the other. I have conditions of that does not change the receiver vi It is set. I'm attaching my vi sending and receiving the part. Please go through it and give me suggestion on how to code the part shipment without changing the receiving party and successffully communicating by udp.

  I am just a starter in LabVIEW.I believe your suggestions of ideas will be very useful to move forward.

  Concerning

  Srinath, R

  One thing you should know is that cast a DBL (or table DBL) requires eight bytes (or an integer multiple of 8).

  The sender must send 8 bytes, which is easier to do by remodeling (padding) of the Boolean array with 8 element (using the table to reshape) prior to cast to a string.

  Here is the code that works. You can easily implement it your original code.

  

• Why and how 'create a profile using the e-mail icon?

  When I try to send a screenshot of a web page, and after that I'm going to "email recipient" a small screen appears and tells me that "no profiles have been created.  To create a profile use the mail Control Panel icon.  What this means and how can I do?  I use outlook express and can not send another email, just not screenshots of web pages.  UPS used to before.  I recently "upgraded" in IE8.  Thank you!

  Check in Internet Options as your default mail Outlook Express Manager
  (The mail applet is to use with Outlook, part of the Office family and completely different from Outlook Express)

• Disk error non system at boot when using the external USB disk

  Hello

  I use Windows 7 Pro.  I have a Seagate external USB disk causing a "Non-system disk error" at startup.
  I had the same problem with a Clickfree drive.
  The problem occurs on my other PC with different versions of Windows.
  How can I get my computer to start and not give me this error message for my backup drive?
  At startup (when the drive disconnected), I get a screen of BACK indicating "Client Mac Addr."... GUID..., DHCP. "I think it's looking for a disk boot from.
  I just need to boot from the internal hard drive.
  Thank you
  AS

  USB external references aren't desingned to be connected on startup, you must also use the safely remove the procedure and disconnect the USB key before closing.

  If you get such a screen "Client Mac Addr... etc" at the start (with usb unplugged), looks like you are using a very old motherboard. If the system starts only with connected usb, then your initial installation of victory is defective or damaged

• Organizer of items 12 crashes whenever I try to use the Photo mail function. Has anyone encountered this bug?

  I insist on the pictures I want to share, go to picture messaging, select recipients and click 'next '. I can get the error message: "Organizing Elements has stopped working" and I have to close the program.

  This is obviously a bug in the program and needs fixing. Another person met it and found a solution. (I might add that the same accident happens if I try to use the function "Attachments").

  Hello

  You are running on a Windows system?

  If so, use windows Explorer to access one of the following files depending on your system.

  64-bit system: "C:\Program Files (x 86) \Adobe\Elements Organizer\PhotoshopElementsOrganizer.exe 12.

  32-bit system: "C:\Program Files\Adobe\Elements 12 Organizer\PhotoshopElementsOrganizer.exe.

  Right-click on this file and select run as administrator and try again your email.

  You have only to do once.

  Good luck

  Brian

• Someone at - it difficult to use the electronic mail on mac?

  HI, I'm trying to set up an e-mail client on a mac connection to the e-mail account configured on BC, but it doesn't seem to work.

  I've got to run on a pc running Windows 7 Professional.

  This is going to be a major problem for the client, if I can't get this to work.

  Any advice / help would be greatly appeciated.

  Thank you!

  Matt

  Hi Matt,

  You get any error message when connecting to the mail server. Have you tried troubleshooting troubleshooting issues sending and receiving emails

• Cannot use the e-mail client without having to pay for the upgrade of Yahoo

  Original title: "Email on Windows Vista"

  I use wireless modem to connect to internet.  Have the Window Vista system. What web-based e-mail accounts he recognizes without having to pay for the upgrade (yahoo)

  Hello

  ' Web Based, you can use some, such that without Yahoo, Hotmail (both free online and POP3), Windows.
  Live Mail, InBox.com (both free online and POP3), Gmail.com (both in line and POP3) and many
  others.

  POP3 mail download is through Windows Mail program included with Vista. For example, you can
  Sign up for Hotmail or Inbox and use online or POP3 or both.

  http://www.hotmail.com

  http://explore.live.com/Windows-Live-Mail

  https://www.Inbox.com/login.aspx?GDI=true

  http://www.gmail.com

  There are many other free services both on-line or POP3.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.