System partition becomes suddenly complete!

Similar Questions

• HP Slekbook 15-b004tu: EFI System Partition

  I'm install windows 10 laptop HP, during the installation by mistak 240 MB EFI System Partition formatted, how to repair back this partition, partition shows me but empty the safe recovery options and also doesn't F11

  I have a recovery dvd media, I do factory reset but not back up files of EFI System Partition.

  Help, please.

  Hi @Nikunjkacha,

  Thank you for your query.

  I take that you upgraded to Windows 10 and deleted the UEFI system disk partition. You have your recovery media and we will do a factory reset. If, after completing the reset factory, if the partition is not listed, here is a link to the HP Notebook PC - hardware failures (10, 8 Windows) screening, which will help you to install the latest version of diagnostics UEFI.

  Please let me know the results.

  Please let me know if that solves the problem by marking this post as 'Accept as Solution'. "To simply say thank you, click on the" ","inch Up ' below!   If you need more assistance let me know and I will gladly do everything I can to help.

• system partition reserves

  installed system partition is 100 MB. somehow, it's now 25 MB and near 100% complete. I tried to use disk management, but could not extend. Makes this partition self adjust? How can I extend the original 100 MB

  Hi sjjss3463,

  Your swap file is not stored on the system partition, so I wouldn't worry about it. Personally I wouldn't worry about the almost 100% of the partition of the system either!

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• System partitions and upgrade to Windows 7, Linux

  Yesterday, I bought my first CV - ProBook 4515 s model with SLED 11 Linux preinstaled. Given that I'm not familiar with Linux systems first thing I did was to install Windows 7.

  My laptop came with 4 partitions that is formatted in a file system that Windows does not recognize. I'm guessing a partition for installing Linux, two of them are system (HP_TOOLS and HP_RECOVERY) partitions and the fourth was just an empty disk. So I formatted the fourth partition and installed Windows 7.

  The problem is now that I am out of system partitions, so can not access other software preinstaled and QuickLook. I tried a single partition format and rename it to HP_TOOLS and then tried to install QuickLook v. 3 but the facility reported that my system has not been supported? I don't want to mess with the other partitions in the fear that I could remove the BIOS, but want to sort this mess up and would certainly like to have some of the options that is is installed with the system.

  Any suggestions?

  Message edited by Martine on 14/10/2009 14:07

  I think that the HP_TOOLS and HP_RECOVERY partitions are formatted as ext2 or ext3 file system, Windows cannot read. It can only read NTFS and FAT32. There is no way I can think to convert the ext2\3 to NTFS without keeping the integrity of the system. In addition, the files are all intended for linux and not Windows. He has makes no sense to do that. That said, I'm not sure if your laptop has Windows 7 drivers now.

• Satellite P200-1JR: display becomes suddenly empty only restart helps.

  Hello

  I have laptop Toshiba P200-1JR, and I am satisfied with the performance.

  Unfortunately, I have experienced a few problems for which I'm not sure if they are material (manufacturing) or a driver problem (software).

  1 display sometimes (maybe once a week) becomes suddenly empty. Nothing special was did not previously, which should be the trigger. Just the time. Only restart helps.
  2 same as 1, but already show just goes crazy for a few second. A few lines aside (as the magnetic interruptions) are on the screen.

  I just downloaded a bunch of driver updates (have not applied the yet), but I want to ask is this already known issue?

  Best regards
  Vladimir Stefanovic

  > The screen started flashing uncontrolled for about 15 seconds, then it becomes totally blank.

  If the display driver and BIOS update help didn t I would recommend checking the laptop in ASP in your country
  Something like this may seem very strange, or it s a hardware problem

  Good luck

• names of system partition

  Can I reverse the sheet music for a clean install so that the partition/drive c:\ is NOT the system partition. On my Vaio, it is the partition musette and as everything by default installs on the C:\ drive, it has caused many space issues in spite of the process of installing programs on disk D:\. This is how the machine and it's very frustrating. None of my other computers have never been set up this way.

  If you you reinstall windows on some of the recoveries, there will be an option to change the size of the C: drive. Otherwise you can specify the programs to be installed on the D: drive. Or use a 3rd party partitioning program to change the size or combine the partitions.

  -Mike Sony Service & Support

• Put into hibernation - insufficient system resources exist to complete the API (Tecra M4)

  I just thought I'd pass on my experience with this problem.

  I recently updated my Tecra M4 2 GB of RAM memory. Everything was fine except everyonce in a while he would not hibernate. However, it would suspend to RAM (standby). It seemed to happen after the antivirus software has managed to (which I had changed at the same time). I studied this way, but it also happened if I had a lot of programs running. So, a quick google search revealed why almost all laptops come with only 512 MB of RAM.

  There is a problem with Windows, freeing the memory in a way that allows it to be written to the hard disk, preventing the hibernation and to create the very vague error message "insufficient system resources exist to complete the API".

  The solution is to contact Microsoft by phone and ask them for the fix for the #909095 of the Knowledge Base article. The fix is free but the MS site makes it seem as if you have to pay £200 to contact Ms support

  This seems to have solved my problem!
  Hooray!

  This is the Knowledge Base article:
  http://support.Microsoft.com/?kbid=909095

  Here's the Blog I found the solution on:
  http://www.ntwizards.NET/2004/10/13/Hibernate
  Of course, the only problem with contacting MS support is that I received a LOT of phone calls asking me what I thought of their support... it was very good, so I don't really mind, but I find it funny that I continue to have called and asked the same questions!

  Hi Kelly

  Thanks for this useful information.
  It of very nice that you posted this tip. I think that it s very useful for users of the forum who might have the same problems on laptops.

  Concerning

• fragmentation of system partition

  system partition shows 14% fragmentation when optimized past to 7% and shows once again 14% when it is scanned into the computer hp laptop pavilion g6 2105tx please help!

  Hello

  The system partition contains the files and start the Windows recovery environment and it is perfectly normal for her to show some degree of fragmentation - that partition should not be défragmentée, because it can cause problems with the loading of Windows.

  Best regards

  DP - K

• Tecra M5: "insufficient system resources exist to complete the API"

  Symptom:
  When you try to Hibernate new notebooks Tecra M5 with-online 1 GB of RAM, the error message "Windows - system error. "Insufficient system resources exist to complete the API" appears and laptop crashes hibernate until you restart XP. This problem may be present on the other model with-online 1 GB of RAM.

  Difficulty: http://support.microsoft.com/?kbid=909095

  PS. you need to call Microsoft to get the fix.

  Hello

  I studied on the Toshiba site and found this one.
  Please check this useful Toshiba FAQ document:
  http://support.toshiba-tro.de/KB0/FAQ6201CE000SR01.htm

  Good bye

• Mirror operating system partition

  I want to my windows server operating system partition 2011 on a raid 1 mirrored configuration to the top

  Developed via disk management raid converts all dynamic disks.

  If you have a real raid on the motherboard controller (and the manual of the motherboard would give instructions) or a third-party raid card that gives more options

• Impossible to install the wireless network adapter TP-Link on Windows XP Pro error "insufficient system resources exist to complete the requested service"

  Hello

  OT: I can not install my wireless adapter TP-Link on PC under Windows XP Pro. I continue to receive messages from "insufficient system resources exist to complete the requested service" after each reinstallation
  I had this problem since I moved into my new house two weeks ago. To my old place, my pc is connected to my router via a network cable, so everything was fine and dandy. However, to my new place, with a network cable is just not possible, so I use a usb wireless adapter to connect. I bought a TP-Link Wireless N USB Adapter (model TL-WN727N) and I can not installed.  First, I installed the software using the CD-ROM of resources which is come with the product then connected the adapter wireless on my usb port at the back of the pc. It detects the device very well, but when he wants to install the driver of this message displays "an error occurred during the installation of the device. Insufficient system resources exist to complete the requested service". When I opened my device manager, a yellow exclamation mark under Network - 802.11 n WLAN cards there. In this window, I tried:!. the driver update (latest driver same downloaded of the site Web of TP-Link) 2. Disable the device (nothing happens) and 3. Uninstall (which I just can't because another message "failed to uninstall the device. The device may be required to start the computer"is displayed). All three failed to install my wireless card. I am out of resources here, so any help is greatly appreciated.
  My PC specs:
  AMD Athlon (TM) II X 2 245
  2.95 GHz, 3.25 GB of RAM
  Windows XP Professional version 2002
  Service Pack3
  Thanks in advance.
  concerning
  gas

  T-Link support tried it yet?  http://www.TP-link.com/en/support/contact/

• The system is unable to complete the update of security for Windows XP (KB2661637).

  Original title: update security for Windows XP (KB2661637)

  The system is unable to complete the update of security for Windows XP (KB2661637).  How can I get my system to accept the update?

  Hi Joseph,.

  You receive messages or error codes?

  You can reset the default Windows Update components and check if you can install the update.

  How to reset the Windows Update components?

  You can also try to download the standalone update package and check.

  Update security for Windows XP (KB2661637)

• Splitting the system partition?

  Hello

  I have two physical hard drives. Currently, each disk has a basic partition. The first detected disk has the C partition and the second disc has the partition (E) Windows XP is installed on E.

  I want to divide the C partition into two partitions. As far as I know, I have to delete the C partition and make two new partitions. I have all the data in c supported partition E if this isn't the problem. When I opened the disk management software, I realized the C partition is marked as a system partition and I can't remove it.

  Is there a way I can split this system partition?

  Hello

  I have two physical hard drives. Currently, each disk has a basic partition. The first detected disk has the C partition and the second disc has the partition (E) Windows XP is installed on E.

  I want to divide the C partition into two partitions. As far as I know, I have to delete the C partition and make two new partitions. I have all the data in c supported partition E if this isn't the problem. When I opened the disk management software, I realized the C partition is marked as a system partition and I can't remove it.

  Is there a way I can split this system partition?

  You need third party software. There are several choices, such as Partition Magic.

• You want to transfer my Win XP system on a new HARD drive. Are there problems with the copying of the system partition?

  Want to transfer all the information on my current including system partitions and data to a new HARD drive than my current HARD drive shows signs of debris. I suspect there are a few problems in the copy of the system partition as some files are not available for copying while windows is running?

  I advise to read the article on the copy of the hard drive in the first place, you can learn more. (:

• CHKDSK runs 5 steps for the system, 3 for the non-system partition partition

  Would be - to schedule chkdsk for the partition system using GUI by selecting two options available here
  It executes all 5 steps of verification of system files and disk.
  Would be - to plan an analysis of the non-system partition disk by setting the dirty bit (fsutil dirty) put...
  It runs only 3 floors of disk scan.

  Whence this difference?

  Fsutil allows you to set the 'dirty' bit for a NTFS disk, autochk performs an immediate chkdsk /f on that volume.  When the F switch is set, the activity of chkdsk is divided into three major passes: checking files, checking the index and security descriptors.

  If you use the R (chkdsk/r) switch, chkdsk performs twice more to look for bad sectors. During step 4, chkdsk checks all clusters in use; during step 5, chkdsk checks the unused beams.

  Given that you used the GUI instead of enter the chkdsk command in a command prompt window or in the run box, you must have checked the two boxes that appear under "to check disk options'-' automatically fix file system errors" and "will search for and attempt recovery of bad sectors.»

  Most of the time, one is not using the R switch or check the box to recover data from bad sectors because it can take a lot of time and (b) "recovered data" are usually not easily usable.