System recovery fails on the new HARD drive (HP - DVD, Vista Home Premium 64 - bit, DV4-1225dx)

I have a Pavilion DV4-1225dx who had a hard drive failure. VISTA Home Premium 64-bit.

Went to buy the oem HDD @ Tiger Direct (0A 56415 Hitachi Travelstar 5 K 320 Mobile Hard drive - 2.5 ", 5400 RPM, SATA 3 G, 250GB, 8MB Cache) but it was out of stock. I bought the proposed replacement (WD Blue 320 Mobile Hard Drive - designed for the calculation of daily - 2.5 "SATA 3 Gb/s, 5400 RPM, 8 MB c...)

The HP system recovery DVDs work for more than 12 hours and fails. CTOERROR.flg

ChkErrBB.CMD: Detect an error in the PININST_BBV

ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log

In addition to a video driver not install, I found:

C:windows\system32\Drivers\enecir.sys not found

Recovering the system formats the HARD disk properly. After that the failure of the HARD drive recovery shows that:

C: 38.8 GB free of 58.0 GB

E: 2.02 GB free of 12.9 GB

15 f009wm 8.1 WIN 64 bit
Office Jet 2540
P2-1113w WIN 7 64 bit
G71-340US WIN 7 64 bit
dv4-1225dx VIsta 64-bit
zd7000 WIN XP Pro
xv886 Millennium WIN / WIN XP Pro
HP deskjet 6980xi
HP pavilion xt236 / ze4200 WIN XP Media Edition

found an another Hitachi 0A 56415 and was able to install with recovery disks. Have used the new and more great as a backup USB drive with in a disk caddy.

Tags: Notebooks

Similar Questions

  • Performance index Windows CPU drops with new hard drive installed on Windows Home Premium 64 bit.

    Hello world. I have a Toshiba laptop with Win 7 Home Premium 64-bit. 1 GB of GPU, 6 GB of ram, Intel i7 Q740 1.73 GHz. operating system has been pre-installed.

    The old hard drive was 600 GB 5400 RPM 8 MB Cache. The new disk of 1 TB 7200 RPM 32 MB Cache. With the old drive the cpu had index of the 7.1. With the new disc, he fell to 5.6. all the other components even rated the two discs. Both discs have a 512th form. Searched everywhere for an answer and would like an answer, cause im very curious and puzzled. Health perfect new drive using disk setiniel and crystal HD... info old drive had bad sectors, but cpu always valued at 7.1. If someone can answer, I would be very grateful.

    SV

    WEI is a completely arbitrary number and because it has been eliminated in the 8 win & win 10.  I would not be concerned about the number unless your computer is actually slower.  Your hard drive has nothing to do with the rating of the CPU.

  • I have a new desktop computer HP with Vista Home Premium 64-bit, with 8 GB RAM and when I try to start Zoo Tycoon 2, he won't play, said that I have no memory system.

    I have a new desktop computer HP with Vista Home Premium 64 - bit, with 8 GB of RAM, and when I try to run Zoo Tycoon 2, I get the following error message:

    You need at least 256 MB of system memory to run Zoo Tycoon 2. (0Mo detected)

    Y at - it a patch? I have read many "Workaround" and none of them work. I tried to run in Windows XP compatibility mode and it didn't work.

    Hey tprefling,
     
    Thanks for posting in the Microsoft answers site!
     
    Right-click on the zt.exe file and choose "Run as Administrator" to launch the program.
     
    See if you are able to play the game.

    If this does not work, turn your computer to clean the start State and see if the fgame plays very well.

    To put your computer in a clean boot, follow these steps:
     
    Note: If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
     
    1. sign the computer by using an account with administrator rights.
     
    2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
     
    3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
     
    4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
    Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
     
    5. click OK and then click on restart.
     
    For more information about the clean boot, see the link below:
    http://support.Microsoft.com/kb/929135
     
    In addition, change the size of virtual memory and see that helps. For more information, see:
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-size-of-virtual-memory

    For more details on the Zoo Tycon game, consult the following link:
    http://forums.zootycoon.com/forums/default.aspx
     
    I hope this helps!
    Gokul T - Microsoft Support

  • I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2.

    I need to know the file current date/time number stamp and the version of "spoolsv.exe" in Vista Home Premium 32-bit with SP2. My spooler file got corrupted and I need to know what that the stamp of date/time on the latest version of the file: spoolsv.exe. I did a search on my hard drive and found 8 copies of the file with 7 different dates. I need to know which copy in my file C:\windows\system32\. I suspect that the problem was caused by some kind of malware. I think that some of the different versions on my machine of the initial installation of the Vista, SP1 and SP2. 3 copies that would explain. I tried all the suggestions in this forum and several others. I tried sfc/scannow and it simply replaces the corrupted file by another. I understand how works this file and a simple copy will do the trick if I knew that the file to use. I know that I don't want to go back to the first version of 2006.  BTW... my symptoms are all my printers have disappeared, and when I try to 'add a new printer' I get an error message saying that my spooler service does not work. When I opened my services window it shows that indeed, he is arrested, but I will not start because the description column contains only the code garbled machine indicating that the file is corrupted, or it may contain a virus. I had been using F-Prot until this virus got by and now I use AVG. I scanned my machine with several cleaning packages and it is is more infected, but I worry that from this corrupt file grow something. I know that the problem is not with my printers or drivers, because everyone on my home network can print on all of my printers. None of the people I know are on Vista 32 bit. They are all running System 7 or XP. I have XP, except that a few years ago I suffered from the "Syndrome of Pepsi" on my laptop and when I bought a new HP, it came with Vista.

    Version 6.0.6002.18294

    Day 17/08/2010

    Duration 14:11

    Duration may vary in different time zones.

  • The contract of affreightment for my VISTA Home Premium 32 bit [oem] will work for VISTA Ultimate OEM Dell disk shape.

    Mine has the Express Vista Upgrade Help Express upgrade DVD from Dell for Vista Home Premium 32 bit in March 2007. [XP to Vista was a promotion at the time]. I did a clean install of vista Home Premium 32-bit using the DVD upgrade at that time here.

    Now, I got Dell VISTA 64-bit DVD to reinstall [Dell Rep told me that she did not have the Vista Home Premium 64-bit and is - this okay for me to receive the DVD of reinstalling Vista Ultimate 64 bit-for which I accepted]

    Resettlement 64bits Ultimate DVD arrived today, in an envelope. I can't find a certificate of authenticity [COA] inside. However the sleeve that wrote this about the following:

    "The Microsoft certificate of authenticity [COA] operating system is a multicolored label located on the side or the bottom of your computer. The certificate of Authenticity contains the product key code, which may be needed to complete the installation of the operating system. »

    Now where's position? Can I go ahead with my clean install of Vista Ultimate 64 bit with the disc I received after formatting my drive where my Vista Home Premium 32-bit far is present.

    I am owner of a single computer in the home environment.

    Snow

    As Dell-Jesse has already been said, "COA at the back of the system is ONLY for Vista 32 and 64 bits and NOT Vista Ultimate or business House. Computers Dell will not have a certificate of authenticity if you use the Dell supplied DVD on a Dell computer. The bios detects that it is a Dell disk and a Dell system and is not a certificate of authenticity'.» Good luck with the new OS!

  • I lost my BIOS password, how can I recover or change the password. I am running vista Home premium 64-bit

    I lost my password to access the bios and set up the screen. How to retrieve or change the password. I am running vista Home premium 64-bit.

    original title: I lost my password

    I lost my password to access the bios and set up the screen. How to retrieve or change the password. I am running vista Home premium 64-bit.

    Buna,

    We are forbidden to help you with the lost BIOS passwords. Contact the manufacturer.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

    About questions about hardware BIOS password reset, we ask that you direct customers to the appropriate resources on the sites of manufacturers of equipment for the correct procedure.

    Please help us to ensure the safety of our community.

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    The Revedere

  • Security issues for XP Pro to format hard drive in a Vista Home Premium computer

    My laptop was running XP Pro.  A few days ago, I accidentally spilled a glass of water on it and the computer died.  I took apart an old external 2.5 drive I had and inserted the laptop drive so that I could recover the files from my laptop.  The other computer in the House is the Office of my wife in Vista Home Premium.  Here's my problem:

    The Vista computer will read the reader very well except for the fact that I can't access many of my files due to the security clearance.  I understood that in Vista, I can take possession, but so far, I figured out how to make it only one file at a time.  For example, I took possession of a record, but then I had to take care of the folders inside this folder, and then I had to take possession of individual files inside this folder.  Even when I try to open a Word document that I have to go through the security process complete to open it.

    Is it possible for me to have access to everything by changing some settings in Vista.  Finally, I'm going to buy a new laptop, and I need to transfer all my files to it.  I don't want to have to get clearance for thousands of files one at a time.  Help, please.

    Thank you

    Derrick

    It is more permissions that it owns.  I guess almost all of the files to copy are in the Documents and settings folder.  So give yourself permissions to full right for all files and folders and subfolders of this folder (both in the main section and in particular advanced section - and don't forget to check the box to include all the files and subdirectories).  That should do the trick.

    If you are still having problems - maybe these can help you get through them, here is more information about permissions and ownership:

    To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

    To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • sfc/scannow foud the corrupted files after upgrade from Vista Home Premium 32 bit

    Hello

    It is an event that I went through:

    (1) recently I received a bunch of updates to Vista Home Premium 32 bit, after I did the update I decided to perform sfc/scannow task and this is the error message I got the "Windows Resource Protection found corrupt files and managed to fix them." Details are provided in the CBS.log windir\logs\CBS.log newspaper. For example c:\windows\logs\CBS\CBS.log

    Repair of system files change will take effect after the next reboot.

    (2) so I did restart and then try to run the sfc/scannow task once again, but I still got the same message I described in step 1 again. So basically sfc/scannow function did not repair the corrupted files.

    (3) the next step, I decided to perform a repair Installation of visa which took me 10 hours to complete the task, once the task of upgrading of repair has been made and before the windows update, I ran sfc/scannow task and this time he finds any corrupted files, but after I updated windows sfc/scannow result was the same as step 1.

    It is obvious to me that one of the updates of the origin of this problem, but find it me hard to pinpoint that one. So I am writing this e-mail to help and I hope that the problem will soon be solved. Please let me know if you need me to submit the CBS.log file for you to review thanks in advance.

    Kind regards

    Jdec9

    Hello

    Sorry to hear that you are facing a problem due to the update of Windows. I'll certainly do my best and get the issue resolved.

    I suggest you to view update history to see which update might be causing the problem.

    (a) open Windows Update by clicking Start , all programs, and then Windows Update.

    (b) in the left pane, click view update history.

    (c) to display more information about an update, double-click it.

    Once you know Update KB number, provide us with the same for later analysis. You can also try the steps in the article and see if it helps.

    You can also download the files of cbs to Skydrive.

    Use SkyDrive download collected files and post screen shot/image

    Hope this helps and let us know if you need more assistance. We will be happy to help you.

  • Satellite P750 PSAY1A: how to create the recovery Toshiba on the new HARD drive partition

    Hello

    I have an old Toshiba Satellite P750 (PSAY1A-01Y022). I just upgraded my memory from 4 GB to 8 GB and am preparing to take my 500 GB HARD drive 1 TB. I had to order the disk online and wait to happen.

    I always try to understand how to create the arrival of my new HARD drive Toshiba Recovery Partition. I do the same thing for an old book, I handled based on something similar to it's original factory State.

    I have reflected on the recovery partition, but does not know how it was created. It is not NTFS. Does anyone have experience in the creation of a Toshiba Recovery on a new HARD drive Partition?

    And the help is very appreciated.

    Thanks and regards,
    Dinesh

    Recovery partition can be created when you use the original Toshiba Recovery disk and install recovery image. Before the partitions to boot OS install will be automatically created, recovery image copied on a recovery and then partition as last step recovery image installation starts.

    A sort of migration of files from one to the other HARD disk is not solution.

    Only for laptop with factory will work and the usable recovery partition.

  • Trying to open the files Windows 3.1 with Vista Home Premium 32 bit

    I am trying to open the files of an old computer running Windows 3.1. the files include MS Publisher, MS Works, encyclopedia Compton, & several other w/3.1 compatible programs. Y at - it a program or an update to Vista that can be used to open these files? What I try to open it & save programs on a version of Windows 3.1 & Vista before using on Vista? I can't open files from MS Office that have been made on a computer running Windows 98 or 2000. Any ideas?

    Windows has many built-in features to make it as compatible as possible with older versions, but Windows 3.1 is really a little old! You can try to use Compatibility Mode, but it goes only up to what Windows 95.

    To run an older program in Ccompatability Mode (as if your PC was using an older operating system):

    1. right click on the program and select 'properties '.

    2. go in the 'Compatibility' tab at the top.

    3. check the first check box and to set up the 'Windows 95 operating system "(which is as old as that).

    4. check all other settings for maximum compatibility (depending on the program that you try to use, some may not be necessary, but you should try each of them to be sure).

    5. click "OK" and try to run the program.

    Note: If you want to try to do this at a program Office (and other Windows programs), this may not work. Please ask for more help with this.

    Your files, you need to just find a compatible program to open with. Please tell us the types of files for more help with this.

    Rifdhan

    If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

  • How to reinstall it on the new hard drive

    Inspiron One my 2330 client hard disk is dead. Obviously, it will not be a recovery partition on the new HARD drive that I installed. Because the Microsoft Windows 8 activation key is embedded in the BIOS, how will I be able to activate the operating system if I install a DVD if there is no recovery logic to tell the installation routine where the key?

    Thank you!

    The product key is embedded in the UEFI BIOS. It will be automatically entered 10 TH2 Windows installation media. If you are prompted for a product key however then you have used the wrong edition of the the Windows 10 TH2 so must use Windows 10 TH2 only language:

    http://dellwindowsreinstallationguide.com/download-Windows-10-OEM-and-retail-ISO/

    Note Microsoft indicated the end date for the free update is in ~ 3 days, you will need to clean install Windows 10 TH2 and activating online before this date.

  • not sure: the new hard drive installation

    I have a Desktop allows a hard disk which is a failure.  F9 during boot diagnostics say its bad.  I just got the HP recovery disk and I'm not sure that 'when' to instaqll them.  I put the OS on the new hard drive and then first run the recovery or recovery disk?

    If you have the recovery disk set for this PC, run recovery on the new hard drive.  To install everything back like it was new again.  The installation of the OS process is executing the recovery.  Install the new hard drive, and then run the set of recovery disks.

  • How to copy the recovery on the new HARD drive partition, HARD drive failed?

    Hallo,

    I have a Compaq Mini netbook with Windows 7 Starter.

    The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

    I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

    So, the question is simple: how to copy the recovery for the new HARD drive partition?

    Hello s91066.

    If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

    You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

    If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

    I hope that is useful; have a great weekend!

  • S10 HDD died, pick up the new HARD drive failed?

    The HHD on my S10 is dead.  I buy a new one and installed.  I when to run the recovery disc I made when I first came to the computer, but they get only part of the way that the restoration.  I bet I have a bad set of recovery disks.  Is there a way to get a clean copy of these?

    Thank you

    Edit: Mod comment sorry about your inconvenience it's my fault... clear .more postname%/ is important

    Rename Postname of SIS Hard Drive Dead Ito S10 HDD Dead, pick up the new HARD drive has failed?

    cordially KalvinKlein

    w5adc,

    Sorry to hear about your problems.  I would check and see what we have in the way of records of recovery - given a bit of time, we could probably burn an entire system in the laboratory and send you.

    Please send me a PM with your details and allow me a few days on this.

    Mark

  • Recovery is possible on the new hard drive?

    Hello

    I think about buying a new hard drive to improve the performance of my laptop Satellite.
    I was wondering if it would be possible to restore my system using the recovery on the new hard drive disks.

    Thank you!

    As far as I know you can do it. What you need is to buy hard drive compatible and functional.

    By curiosity, but what model of laptop do you have and what hard drive you want to buy?

Maybe you are looking for

  • What are the causes of horizontal lines punched in the photos

    I own a 3310 all in one and it started showing perforated horizontal on the picture when completed lines.

  • View on Qosmio F60 - 10U towers Mozaic and blocking of the system is

    Since the day I bought F60 - 10U. I am facing problem Jules Destrooper. My screen sometimes turns into Mozaic and system crash at the same time. the only thing I can do is to restart with the power button / stop. I gave the service center; They said

  • HP ENVY 5530: Claim Code

    Hi all I put my HP printer with ink instant before and that's why, my printer currently has instant cartigdes of HP ink inside. However, I cancelled my registration for a while and I would like to implement a plan of education again and I need a code

  • def type change is updated to all connected controls?

    Hi all I create one type def on a cluster in which digital, string, array, and error output will be contained. I save as type def. (*.ctl). I drag the *.ctl file to a new VI which will create a copy. Later if I change the file ctl of origin (for exam

  • Precision (Float point) on FPGA 2011 operation

    Dear Experts... For my application, I have to rip demodulation on FPGA. I want to store an array of double precision number. When I am trying to perform any number double-precision I get this error "wire Type: not supported in the current target" for