System recovery - failure hard drive Pavillion a647c don't need no access to built-in recovery disk Info

Similar Questions

• I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  Hello

  There is no download available from Microsoft Vista.

  Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

  p.s. If the old hard drive is still installed and running before you change on hard drives and you never received the to purchase recovery discs, you can make the recovery discs from the recovery Partition which should be on the old hard drive. You will need to request that the manufacturer how to do as each computer manufacturer has their own way of making records of this partition recovery.

  It depends on the old hard drive still works.

• HP Pavillion l 17-g192dx: not found boot device, please install an operating system on your hard drive.

  ProdID:V0Q01UA #ABA

  Hello, so I performed a reset that restore my computer to factory settings, I have chosen to erase all files. I've done this before, and everything went well. What was going on, it was my disc useage was at 100% a lot and that something was wrong with my computer then I factory reset it. While the factory reset is 44% in "resetting your computer" and the next thing I knew I had 2 options, stop or start with advanced options. Well, I chose to stop it, 5 minutes later, I turned it back on and I ran a SMART check has no that was the ID # 9367LW-86J89N-MFPX7G-60BR3 followed by the product id that is shown above. He said that when I start to Boot Device not found, please install an operating system on your hard drive. Followed by the hard drive (3FO), I can only click f2 and it gives me the link to visit the Help Center. The computer saying that it did not have an operating system was not the first alert, that I had, it was something else saying there was an error of hard disk which then became not having not not an operting system. I tried to go to f11 and go in this way, but regardless of what it always comes back to the screen that shows the found boot device, please install an operating system. Help, please! Thank you. in advance.

  He was sent to HP they will solve this problem, my warrienty coverd.

• Not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system

  HP Pavilion Dm1 4000au, windows 7 Home premium 32-bit, error: not found boot device. Please install an operating system on your hard drive. Hard drive (3fo) F2 system diagnostics, how do I 3Fo system to be installed my notebook/laptop...please help me...?

  If F9 does not run the diagnostic, then most likely to replace the hard drive.  Once the new drive in place, start the recovery DVD series that was made when the PC was new.  If you do not make them, or they are lost, order a new set of HP.

  See here: http://support.hp.com/us-en/document/bph07143

• How to load the operating system of split hard drive D of Aspire5315?

  OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

  How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

• If I replace my hard drive, what I need to do to install my OS (Vista) on the new hard drive? I don't have an OS disc (factyory installed).

  MS Vista was preinstalled on my computer. (I bought it new.) It did not come with a MS Vista program disc.) My hard drive has crashed and I need to replace it. What should I do to get the Vista OS on my new hard drive.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• my lap top says device not found Boot please install an operating system on your hard drive

  I was on yahoo and page froze. I hit ctrl/alt/del and nothing happened. Then, I hit ctrl/esc. I now have a screen saying device not found Boot. Please install an operating system on your hard drive. hard drive (3FO) what hurts? It is a Compaq presario CQ56-112 NR computer laptop Windows 7

  I suggest go on the link following and through the listed troubleshooting steps based on your symptoms:

  http://support.HP.com/us-en/document/c01443371

• The system recovery disk - how do without floppy drive?

  I am trying to create a "system recovery disk" as part of the TOSSHIBA ASSIST (protect and fix the section).

  However, before we proceed, I noted that he was invited to a 'floppy' create a recovery disc but this model without this facility data can be recorded on a CD. I didn't get throughout the procedure and find that I couldn't finish it due to no floppy drive!

  Or otherwise just use the product recovery DVD - Rom supplied with the laptop in case of problem... not sure if this would hold the same data?

  Any help is appreciated!

  Hello Christine

  If you look carefully on this print option (shortcut) it is written to create the CD drivers & tools and in aria info nothing follow description allows to create an external symbol to the top of the caisse de dépôt drivers & tools.

  You use this shortcut, you can simply create Tools & Utilities CD and not the system recovery media. I did a few times without any problem. Equip your optical drive for CD - R, click on this shortcut, click the button BURN.

  All that s!

• Copy the files from the flash drive on the hard drive but I don't want to copy the files I already have.

  I have Windows XP.  I have a flash drive with many files that I have on my second hard drive.  I just it copies the files that I have on the hard drive and I don't want to have to sit and answer 'yes' or 'no' question about the replacement of files each time that it recognizes a file duplicate. How do I do that?

  When you see this double prompt or not, are there not a checkbox that says something like "Always do this for all files" or something in that sense?
   
  You can manually copy the files. Here is the CTRL key while you click the files you want and then just drag them to the location on the HARD drive.

• Computer failure, hard drive readable: can not find the 5 Lightroom Catalog.

  Computer failure, hard drive readable: can not find the 5 Lightroom Catalog. Help appreciated.

  I used 5.3 LR on Win7, never pay attention in the name of the catalog used. My photo files were on the same physical hard disk D: partition.

  Now that I have a new computer Intel NUC, with Win7 installed on drive C: (SSD M.2), I plugged my old drive hard drive E: (old C :) and drive F (old d :))

  I have re-installed LR 5.3 and also upgraded to LR 6, , but the problem is that I can't find the catalog I was using with LR 5.3

  I searched for *.lrcat and see all previous catalogues lightroom starting with LR 2, 3, 4, 5, getting bigger and bigger, but not catalog 5 including the current date.

  The catalog would have another name or extension?

  I have the old C: drive. Is there a config file that would confirm where the catalogue is supposed to be?

  Help!

  HM, it is clear that it is not found on your old C: (so E :). )

  And there is no config file to tell where to find the catalog to Lightroom. It's just that the catalog is in the place you choose (most of the people chose to have the catalog to the location by default...).

• I have adobe CS6 on my old hard drive and I want to transfer more in my new hard drive. I don't have the disk that it came on more. How can I do this? also, I never put a single copy on a laptop and it is accepted 2... If this is important.

  I have adobe CS6 on my old hard drive and I want to transfer more in my new hard drive. I don't have the disk that it came on more. How can I do this? also, I never put a single copy on a laptop and it is accepted 2... If this is important.

  Disable (help > deactivate) on your old hd.

  then install it using the installation files and your serial number.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• If I bring in photos from Iphoto, I use more disk space on my hard drive. I don't want to replicate my entire file. I have 26000 photo photos in I.

  If I bring in photos from Iphoto, I use more disk space on my hard drive. I don't want to replicate my entire file. I have 26000 photo photos in I.

  You need to duplicate pictures unless you want to use the PSE as external editor for iphoto. In iphoto, your photos are stored in a library owner, which should never be marred with programs other than iphoto. Written to the iphoto library from outside iphoto is the best way to corrupt and lose all the photos it contains.

  So you can either set PSE as external editor and send the photos of in iphoto, or you export photos from iphoto to use them outside of this program.

• HP g5000 system recovery disk fails 1002

  Hello

  My frends daughter took the computer hp laptop in America and then the hard drive failed with no recovery disc, she went to a repair centre and had a new fixed hard drive.

  I ordered that the best2serve system recovery disk but the laptop would not boot from it?

  I tried the disc in my HP desktop computer and it worked fine this DVD player is also suspect.

  I then tried my Dell C521 Office Vista recovery disc and worked well.

  If I then mounted the disk recovery was going well and I could read that all just strange content cannot boot from it.

  At least downloaded Bios HP update in the case who would fix it (not good still no boot)

  then I went back to my office and built a flash drive USB Bootable with the contents of the recovery disc

  It starts very well and started the drive to rebuild some recovery Manager (don't remember the exact words)

  and shortly after failure of contact error 1002 HP

  searched error 1002 and WoW wish I had lost any time to buy the drive for recovery as endless calls all say that they do not work!

  PS he also destroyed the Dell Vista work making

  can someone suggest where to start

  (1) to install HP real recovery disk recovery image (with suspect dvd)

  (2) to recover money if possible

  (3) ps AS USUAL out of WARRANTY

  After more than 24 hours now and the laptop has been rebuilt and updated.

  The created disc recovery actually work Horay

  Complaints to HP service have repaid the cost of the disk recovery

  But they do not seem interested in helping other users with 3 fixing problems

  (1) recovery disks don't work not (need a update fix or DVD Firware of bios)

  (2) there is no option to zap all the existing partitions on the hard disk to avoid the error 1002

  (3) there is no Documentation provided to help the user to re - build its PC

  Come on HP if you read this will fix you the problems!

• System backup Image against the system recovery disks

  Hello

  I'm new to the system recovery things and I have a question...

  I just bought a new computer laptop m7-1015dx of Pavilion and need to do system recovery discs... (which I realize restore laptop to factory default)... BTW, I have already created the system repair disc.

  However, I read an article on creating a system backup Image allowing you to recovery if lost EVERYTHING, all your installed programs, etc.

  First Question:

  Can someone tell me if I do the backup IMAGE of the system...

  Do I still need to create recovery disk (mfg default) system also?

  The second Question:

  If I create system recovery disks can I still this Recovery Partition?

  I am really really wanting to partition my C:\ drive... it is huge

  In addition, I hate to see storage folders involved in system folders...

  Currently using a symbol/character to separate them.

  From now on, I can't partition the C:\drive all partitions are used as... Max is 4

  and I have 4... C:\drive, System Partition, Partition HPTools and recovery Partition.

  Any help or assistance would be appreciated.

  Thanks for the research.

  Best regards, Jenn

  Hi, Jenn:

  I'd certainly recovery disks because in the case of a hard drive failure, a recovery partition is unnecessary because it would be on the failed drive.

  Recovery disks will do the same as a recovery partition. Reinstall the operating system and programs supplied with your laptop.

  I have also copy off the coast of the C:\drive SWSetup folder and store it on a portable hard drive that contains all files Installer provided with your PC (except MS Office 2010 Starter).

  You can also make your own Windows 7 installation disc and have a nice bloatware without installing windows, and then install only the programs you want from the SWSetup folder.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You can get rid of all the partitions you want to if you plan to use recovery or disc of Windows 7 installation method that I posted above.

  I write my product key and store them somewhere for more security that many people report that it fades if you keep the laptop on your lap a lot, and then you wouldn't be able to use the alternative method to install W7.

  Paul

• How to get system recovery disks

  original title: need to erase my hard drive to get rid of a virus, but the laptop did not come with disks in the system, because they were already installed on the laptop. What should I do?

  I bought a laptop computer three years ago and I had very little trouble with it. But recently, it has become very slow, even though I have plenty of hard drive on the left. When it's built in wifi suddenly stopped one day, that I took it to the geek squad in PC World, who told the driver he had been uninstalled and who, after having worked on my laptop and see how slow and it was slow, it was probably the result of a virus.

  I was told my only option to remove potential viruses was to back up my files and wipe my hard drive for all files. I was quoted £60 for this service so I went home and saved the files I wanted to keep on my laptop hard drive. I wiped my old PC hard drive before you delete the virus and I could then reinstall Windows and the built in programs using records systems. However, I bought this new laptop and all programs have been preinstalled and came with no system disk.

  What is the best way to go on my hard disk wiping programs and files without Windows, or should I just pay PC World to do properly?

  Thanks for the help :))

  When you clean your hard drive, it is wiped away.

  You must reinstall Windows during this process.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner