System recovery: how long does take?

I'm trying to recover my system through repair of the DVD Windows Vista Ultimate 64-bit.  How many hours does take for a 1 TB partition?  The partition is on a RAID 1.  I have a second volume of 1 TB and I wonder if she attempts to retrieve that too, but the BONE is only on the C: volume.  All answers are appreciated

Sincerely,

penciline

It should only take that a few hours - with this disc size and depending on how full it is it can take as long as 4 hours or more (maybe even a bit longer).  If she "s been going on for 12 hours or more, then it is almost certainly frozen and no longer works.  The problem is that close a system in the middle of a repair of the system can cause much harm to the operating system to the point where the only option is a clean install (so I hope you you saved before you start).  Even if the system starts (and is not), the chance to try an alternative remedy are greatly reduced.  But if the system has been running for that long and is still not done, so you can wait a little longer (say another day) just to be absolutely certain or you can bite the bullet, power off the system, and to pray, it works always or you can repeat the process of repair of the system.  If find you any type of access, and that you do not have a backup, do one as soon as possible as the chances of the system crashing or refusing to start are increased considerably after one such event then do the backup while you still can (if you still can).

Frankly, I don't know how it works with RAID 1.  I suspect it is the repair on the C: drive and simultaneously makes the changes to the other player or expected that it has and then modifies the other disk after the first has been repaired.  I don't know if he's going 'out' system before the two disks are again identical, or if he will do once the C: drive is over. If it needs to do both before you complete the process, then double the time I listed above (which means wait another day can be a choice wise).  The worst, you have to lose is another day without your computer if it still works on the repair.  I'll be patient because the alternative in the case of which is often unpleasant to say the least.

If you have no backup and cannot start normally or in safe mode after this, you can tryKnoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (made on a different computer).  Boot the disk.  This might give you enough access to the system (if you do not have any other means) to backup your important data.  If this does not work, try slaving the hard drive to another computer and see if you can access it with the other computer.  If so, you should be able to backup your important data.  If this isn't the case, then the only way to possibly recover the data would be to take the reader to a technician in data recovery (which will charge a fortune and give no guarantee).  Or you can simply write the data and do a clean install.

I hope this helps.

Good luck!

Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • How long does take to load know last good configuration?

    Waited about an hour. How long does take to load know last good configuration?

    It should not take more than he does start normally.  The Configuration of the property last known (LKGC) is a copy of the control set that was used last successfully start the machine, the boot is only considered successful once you log on to the computer.  When you connect successfully on the control set used to start the machine is copied on a numbered control (HKEY_LOCAL_MACHINE\SYSTEM\ControlSetnnn) the value and the value for LastKnownGood in the HKEY_LOCAL_MACHINE\SYSTEM\Select is updated to represent the LKGC.  Changes that you make after you log on is not registered in the LKGC.

    In general the LKGC is useful when installing hardware or drivers or when incorrectly configured services prevent Windows to start.  On an operational computer the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet represents this set of materials and services.  It may be useful:

    Information on the last series of well-known control

    What are control sets? What is CurrentControlSet?

    John

  • I unsubscribed from my application only one then it refunded, but how long does take to get to my accounan for me to get my money back

    I bought a computer application don't work well one I unsubscribed from my application one then it refunded, but how long does take to get to my accounan for me to get my money, I have looking for Bowen but I Don t have the refund back on my account

    < re-titled by host >

    Normally apple support sends you an email when a purchase is refunded. Most of the time it will hit your account within 72 hours.

  • How long does take to set up the date and time

    How long does take to set up the date and time

    Less than a minute.

    Settings > general > time zone > set automatically

    If this does not work, try the help in this support article > If your Apple TV will stop to display date and time on startup - Apple Support

  • How long does take to download el capitan?

    Title says it all.

    I am surprised that the answer came not upward when I asked.

    How long does take to download El Capitan?

    Depends on many factors, the speed of your Internet connection is one, how busy the download servers are another, are the best you can get is a range. Which will be between 15 minutes and 2 weeks.

  • How long does take to install the update of El Capitan?

    How long does take to install El Capitan?  Attempt to update DL to the Mavericks, but there is no progress bar or another indication of xfer.  There is a box that says "Download" - but this shows that at least 40 minutes.

    http://Apple.StackExchange.com/questions/218758/how-to-know-appfrom-AppStore-is-still-installing-and-didn ' t just hang

  • How long does take to resolve my problem - locked ID?

    After that I sent them animals to verify my identity, how long does take to solve my problem

    It should not take more than 24 hours.

  • How long does take to download library on iCloud?

    How long does take to download library on iCloud? I watched a snail for days process now. Which cannot be good?

    This will depend on the speed of your Internet connection.

    For my library, it took eight days to download 40000 photos and videos, using a reasonably fast Wi - Fi provided by our company.

  • How long does take to synchronize files on an iphone6

    How long does take to synchronize files on an iphone6

    Depending on the amount of files, the size of the files, it may take a few minutes. You will need to provide more information for an adequate response.

  • How long does take to recharge magic keyboard and mouse 2

    How long does take to recharge magic keyboard and mouse 2

    I read somewhere 2 minutes to load the Magic Mouse 2 for 9 hours of use.

    If you have them already, their time and their connection.

  • How long does take to load up one I watch

    How long does take to reload a new one that I watch ready to be used for Christmas

    Hi Bex

    Charging time is approximately 2.5 hours for a full charge from 0-100%.

  • How long does take to burn a DVD of an average movie?

    How long does take to burn a DVD of an average movie such as downloaded on the net?

    Depends on the size of the movie file and the speed of the DVD burner and burn speed selected.

    If it's a 1 GB file, to burn it on a DVD to about 2 x the speed, could take 15 to 30 minutes.

  • How long does take to load lightroom? and how to pause the download and start later?

    How long does take to load lightroom? and how to pause the download and start later?

    Hi AdobeIDBailey,

    The time required to download the product depends on the speed of your internet connection.

    The download cannot be suspended once launched, it will stop when you are finished, or if you cancel it.

    If you see it is stuck or not moving not quite so if please cancel the download and refer to the steps below and try the download again: (these steps will also increase the speed of downloading as security software can also slow your downloads)

    1. turn OFF any security software or firewall installed on your machine temporarily

    2 - CUT the browser protection tools or add as well as for now.

    Let us know if that helps.

  • How long does take to install the creative Cloud Desktop application? It seems to take ages?

    How long does take to install the creative Cloud Desktop application? It seems to take ages?

    Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

  • How long does take to receive the cert.

    I wrote my test and I passed. It is on more difficult things I've done.

    I was told that during Setup and config covering 80%

    I think that its more close as 45%. I spent two months reading material and exceed the blue print.

    All of you who I'm happy on my collar. My only question is how long does take to receive the VMware certification from the time of the test?

    Congratulations! You should get an email 1-2 weeks after the exam, asking you to confirm your delivery address, it then takes about 4 weeks before you receive the welcome pack. Your VCP will appear on an electronic transcript once you have verified the address of delivery too.

    Scott.

Maybe you are looking for

  • Firmware R8500

    After trying all the same beta firmware versions and questions (wifi stall, having to set every day so he can do whatever it is) and now started to happen with the original firmware, I decided to try a firmware open source for the first time. So far,

  • Pilot missing ACPI\AOA2011 s400

    After you install all the drivers on the Lenovo support site, My Ideapad S400 Device manager still shows 1 unknown device. Is the hardware Id 'ACPI\AOA2011 '. How to fix this? Thank you.

  • How to open GSView using ActiveX

    Hello I've implemented a vi with microsoft excel and activeX auto print. Can you teach me or guide me on how to open GsView files with the extension ".ps"? I want to do the same thing as the Print_File.vi. I want to open the file in GsView and auto p

  • When I download a file of binnary my computer goes haywire

    When I want to update my Firefox browser to a new version or any other program from the internet, programs do not display the function "run."Instead they ask me to 'Backup' rather that 'run '.  When I later try to open it by clicking on the saved "Bi

  • Error code: 80070643 (cannot access photos)

    I can't access my photos