System repaired after crash, now I can't connect to the internet.

Similar Questions

• I deleted a virus from my computer this morning with Security Essentials, now I can't connect to the internet.

  I deleted a virus from my computer this morning with security essentials, now I can't connect to the internet. The connection icon in the lower right corner of the screen says I am connected and the signal strength is 'very good', but I can't go online. The error message I receive when I right click and 'fix' the connection says: "failed to query TCP/IP connection parameters. Cannot continue. " For assistance, contact the person who manages your network. How can I fix it? The computer is a HP Pavilion dv2000.

  original title: can't get online

  Hello BurnBurn,

  I suggest you to re-installing the driver for your network card. This may involve completely un-installing it and re - install:
  http://support.Microsoft.com/kb/283658

• I installed a copy of XP - now I can't connect to the internet.

  We have just received a new laptop, so we moved things around.

  We had a desktop computer that was under Windows 2000.  We also have a lptop that is provided with Windows XP.  I just installed XP on the desktop - now I can't connect to any site on the internet. The 3 are connected using Network Magic to manage the network

  The resolution of the screen on the desktop is also off now.  I don't get the 4 colors of the Windows symbol & the background is distorted.

  I can solve this mess?

  Hi GinaQQ,

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article mentioned below.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  Method 2: Also, try to reset the TCP/IP Protocol and check the results.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

   

  You can also view the article mentioned below for more information about the screen resolution:

   

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

   

  Let us know if that helps.

• After the removal of a virus, I can't connect to the internet, is looking for an IP address, and the RPC server is unavailable, said

  My netbook has a virus so I did a scan and remove infected files and a program which the virus attached itself to.  Now, I can not connect to the internet.  He is looking for an IP address, and he also says that the RPC server is unavailable.  Any ideas?  Help

  Hello

  Step 1: Start your computer in safe mode, and then try to start the Remote Procedure Call (RPC) services and start the computer in a clean boot
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click Remote Procedure Call services.
  c. change the startup type to automatic, and then click Start.
  d. click ok to apply the changes.

  Reference: http://windows.microsoft.com/en-US/windows7/what-is-safe-mode

• Can not connect to the internet via my router

  I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

  Is there something else in my network installation of Windows 7 that needs to reconfigure?

  Hi Viking_Dan,

  It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

  Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

  Ping xxx.xxx.xxx.xxx

  (where the x's represent the IP address)

  You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

  If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

  Let me know what happens

• I can't connect to the Internet wirelessly

  I just replaced my wireless device and now I can't connect to the Internet wirelessly

  Hi JimMahoney,

  You have installed the necessary drivers for your new wireless device?

  You receive an error message when you try to connect to the internet using your router?

  What virus protection software is installed on your computer?

  I suggest you try the steps mentioned below.

  Method 1: Run the network troubleshooter utility in Windows 7.

  Please follow the steps below mentioned link to run the network troubleshooter utility

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  Method 2: You can also check the configuration of your new wireless device.

  Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device.

  I hope this helps.

• I had to restore my computer to factory settings and now I can't get on the internet

  I had to restore my computer to factory settings and now I can't go on the internet. I have Windows 7

  Hello

  When you perform a restore, you may need to reinstall the network drivers, etc..

  As you can not access the internet on the recovery computer, use the computer that you are on to get here to do this.

  Go to the website to make your computer > Driver and Software Support Section > find your computer model number > then your operating system > locate drivers Windows 7 > download and install the desktop > copy to flash drive > transfer onto the repaired computer.

  Driver downloads:

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

  ASUS:

  http://www.ASUS.com/support

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  You can download all the drivers this way, or once you have network and/or pilots Wi - Fi installed get the rest downloaded directly to the repaired machine.

  See you soon.

• I can't connect to the internet via my host after uninstalled antivirus software and restart

  I can't connect to the internet via my host after uninstalled antivirus software and restart it.

  I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.

  Hello

  This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.

  Unable to connect to the Internet after uninstalling Norton AntiVirus.

  http://Service1.Symantec.com/support/NAV.nsf/8d071816eedd7cac88256c0e005a96e5/751c3298ab99cf7188256d34006702e2?OpenDocument

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows?

  322756 (http://support.microsoft.com/kb/322756/ )

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• I can't connect to the internet after the elimination of the virus and new restore point.

  I use IE8. I can only connect to the internet in safe mode with network.  What can I do to connect to the internet in the normal windows?

  Hello

  When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files  When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.

  If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int ip reset press enter

  ipconfig/flushdns, press enter

  Restart your computer.

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• I have updated and now I can't get on the internet

  I finished the new update and now I can't get on the internet? How can I fix it?

  What happens when you try?

• I recently changed internet service providers and now my Wired desktop can't connect to the internet.

  I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

  Hello

  Follow the steps in the KB article below and see if that fixes the problem.

  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

• I got my PC back to the original (as it comes in the box) and now I can't go on the internet.

  I got my PC back to the original (as it comes in the box) and now I can't go on the internet.  What should I do to achieve this?

  Contact your internet service provider,

  You can either reset your dsl modem / cable modem / software disc.

  If your wireless network, you have to reenter the wireless network / password. (if applicable with other computers to use it)