System Restore does not not for Windows XP.

Similar Questions

• Envy of HP dv7-7332ea - System Restore does not work on windows 8

  Hey there,

  I recently bought this machine about a month ago. I used the Windows 8 System Restore feature to restore my pc to a previous state.

  However, after running it, I got a message saying: it failed and to ensure my anti virus is disabled. Accordingly, I have disabled Norton and tried again but it still does not work.

  Previously, the only problem I had with the pc was that he locked himself completely and therefore I turned off the machine that I have been unable to close.

  When I rebooted, HP Support Assistant could not run and so I uninstalled and then reinstalled from website theHP. It is now resolved. The thing is I'm a little scared that something is wrong with the machine that is the reason why I think that the system restore does not work.

  I'm a newbie on the computers here. Could you please give me some advice to diagnose if there is nothing wrong with my machine and fix the system restore?

  See you soon,.

  Damon

  Hi Damon,

  Norton is a component called 'Tamper Protection' that should be disabled before a system restore can be performed - for more details on this topic, see the following link.

  Disable self-protection.

  Kind regards

  DP - K

• System Restore does not work on my Windows 7 computer

  System Restore does not work for me on Windows 7 pro, he returns with a cancellation but does not either.  I have load a movie in movie maker and all the trouble started.  I couldn't finish the loading of the movie at that point, I started to have problems with the operation of windows.  End result, I tried restoring the system without success...

  Hello

  1 are you getting any error code or error message?

  2. have you successfullyperform before system restore?

  3. have you made any change before this problem?

  I would suggest trying the following steps and check if it helps.

  Step 1: search for errors in the event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Step 2: check if you are able to save the clean boot.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Step 3: security software temporarily disable and check if it helps.

  Disable the anti-virus software in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: After reviewing the matter, must reactivate the security on your computer program

  Also refer to:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Sebastian M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore does not work, once again.

  Hi, I read a topic of 2010 that has not yet been answered. I worked with a tech at Microsoft by e-mail, but when I answered: System Restore didn't work. Now it does not work yet. I had installed Returnil system safe, but I got an error msg 0 x 80004005, (third-party antivirus), so I uninstalled the program. I went through the registry and delete something with Returnil all 4 sections of the registry. Remove the common files folder that was left after uninstalling. Restarted my computer several times. I use MSE, with free versions of spywareblaster and MBAB, who are both at the request not in real time. I tried to restore to a time before I had installed Returnil first, (I installed and uninstalled 3 times in 2 days) and could not. I tried to use a snapshot to restore spywareblaster and managed to restore to the point 2 x before installing because forward the installation of point returnil has been altered. At the moment no malware has been detected and no threat of MSE. What to do next?

  Thanks in advance for any help. Liz.

  Here's my usual route to find out how to reinstall System Restore:

  If you have already run MBAM and SAS, temporarily disabled your antivirus and anti-malware applications and tried your Safe Mode system restore and you still get the restoration of the system to work, you must reinstall just your system restore.  You do not have to reinstall XP - just reinstall the system restore part.

  System Restore is a frequent target of attacks by malicious software.

  When you reinstall the system restore, all your current Restore Points will be deleted and you must restart your computer once the installation is complete.  After the reboot, a new Restore Point will be created as a new point of system control in your calendar of SR.

  If your system had a malware infection, it could be that some of the files in your old Restore Points are also infected up to wipe out the 'old' and new is often a good idea if you wonder if the old Restore Points are infected or not.

  Assuming that your XP is installed on drive C of your computer:

  As you go through the reinstallation of the RS, the resettlement will be asked to locate certain files as you go along and ask your XP installation CD.   If you do not have a genuine XP bootable installation CD, you can change the path where Setup looks for files one at a time, because they are needed.  More on that later.

  Navigate to the following folder:

  c:\Windows\Inf

  Locate and right-click the following file:

  SR.inf

  Choose Install

  If you can not see the sr.inf file, set up your system to show hidden files and show file extensions.

  Click on tools, Options, view and turn on "Show the hidden files and folders" and uncheck "Hide extensions for known file types", then you should be able to see the file c:\windows\inf\sr.inf.

  Installation can request files from the c:\windows\inf\386 folder.  It would be your installation CD bootable XP genuine if you have one and the Service Pack installed on your system must be the same as the CD that you will use.

  You don't need absolutely a CD to do the reinstall, because files must already be on your system somewhere if SR was working before.

  If you are prompted for a file, and you can't find it where I suggest in my example below (it works on my system), you need to search your hard drive and find where the files on your system.

  If the request to a file and you don't know where he is, let waiting for installation and click Start, search, and search for it
  has requested the file and find it on your system.  If SR has already worked before, the file is already on your system somewhere.

  Search finds the requested file, go back to the installation and specify the path where you found the file requested and click OK.  Installation can request several files along the way, but you can find them all.

  Here's how my system works when I reinstall SR when I pretend that I don't have a genuine XP bootable installation CD:

  When you are asked:

  SR.sys

  Point the install in c:\windows\system32\drivers

  When you are asked:

  c:\windows\system32\srclient.dll

  Point install it in c:\windows\system32

  When you are asked:

  Filelist. XML

  Point of installation at c:\windows\system32\restore (or c:\windows\ServicePackFiles\i386)

  When you are asked:

  srframe. MMF

  Point installation c:\windows\system32\dllcache (c:\windows\system32\restore)

  Once installation is complete, you will receive a message that you must restart your computer.

  Restart your computer and look at your schedule of SR.  You should have a new point system control in your calendar.

  When you get SR working again, I ran MBAM and SAS to make sure that your system is reasonably clean of malware.

  The day that you think you need to help the system restore you is not the day to discover the system restore does not work, then you need to test.

  After the reinstallation, manually create a Restore Point and test the restoration process and make sure that you are convinced that it works from one end to the other.

• System Restore does not start.

  I use windows xp media edition.  The system restore does not start.  I lift the box, but when I click next to choose a system restore point, nothing happens.  Help!  I tried to do it in safe mode, but it does not either here.

  Running sfc/scannow won't help you.

  It's nice when sfc/scannow runs silently and can't find anything to do, but if your installed Service Pack does not match the Service Pack of your true XP bootable installation CD, it will complain (much).

  Norton is notorious for interfering with SR, so much that they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  Sometimes the system restore is so distressed that you just need to reinstall the system restore (you don't need to reinstall XP - just the part system restore).  The downside to this is that, in doing so, you will lose all your current Restore Points.

  If only the SR calendar is showing a blank white screen where the calendar should be empty, this means usually the jscript.dll file became somehow unregistered and you can re-record it, but who does not exactly sound like your situation.

  It does not hurt to re-register the DLL files, even if they do not need renewal, you can run these commands and then check your SR:

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript .dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  I guess that Norton is somehow interfere well, but running that SR mode without failure is usually the remedy to this situation.

  If that does not receive your SR going, then maybe some other people have ideas.

• My system restore does not work even in safe mode and I can't download anything.

  Original title: Hi, one day I turned on my pc. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work.

  There was nothing but my background, then after 2 minutes my desktop icons appeared. But no start bar. Then, I realize that system restore does not work even in safe mode. I can't download anything. And the windows installer does not work. Help! PLeeease.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us firstly the sfc scan and check if there is any missing system file.
  Reference:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  Try the methods listed in the articles below and check.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
  http://support.Microsoft.com/kb/

  Method 3.
  Re-enter the Setup engine
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:

   
  MSIExec /Unregister
   
  MSIExec/regserver

  Method 4.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• System Restore does not start and the creation of a shadow copy times out

  What should I do if the system restore does not start, when creating a shadow copy times out?

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. What is the accurate and complete error message you get?

  I suggest you try the steps suggested by Gokul T on September 8, 2010 and see if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/system-restore-will-not-start/16c201d3-3932-40e4-883C-502f701b077f

• my system restore does not work, nothing is changed

  I have vista home premium and my system restore does not work no matter how, I try

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System Restore does not-how do to adjust settings

  System Restore does not work on my laptop.
  It did not work because the new toshiba set by phone for me when I bought it.
  But now I formatted it and its not working yet.

  Any help on how to adjust the settings.

  Hello

  It's very easy
  First you should check if the system restore is not disabled on your laptop.
  This can be checked in the control-> system-> System Restore tab panel.

  You have to uncheck the option called turning off the coast of the the system restore on all drives.
  Please check if there is enough free space on the two drives for the files in system restore.
  In the settings you must set the disk space to use to the maximum!

  After restarting again you should start the System Restore tool and should create a system restore point.

  Good luck

• professional XP System Restore does not

  My system restore doesn't work on my xp professional and I think that there are errors in registry. Can anyone help please?

  What does "does not?

  Why do you think there are errors in the registry?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.

  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  Remember that the system restore is not a time machine.

  Have you ever used the system restore to restore your system in the past?

  Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work (some thing besides 'it does not work").

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:

  Restoration incomplete. Your computer cannot be restored...

  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us?product=home&version=1

  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.

  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.

  Note that if you do a Safe Mode system restore, you will not be able to cancel it and there is no option on the System Restore screen for "Undo my last restoration" as you would if you were to restore your system from a normal startup.

  Give these ideas some consideration if they apply to you.

  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.

  No matter what you use for protection against malware, I do so and then only begin to solve any problems:

  Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues.

  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.

  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).

• Helpctr.exe does not load in the Start Menu. System Restore does not work.

  Help and Support not be loading not on the Start Menu. I get a msg of error helpctr.exe is not found. I run for the file with no result. Also the system restore does not work even in safe mode. I use XP Home SP3. Any suggestions? Thank you.

  No problemo!

• System Restore does not work completely. Virus problem?

  When the System Restore dialog box asks me when I want to restore from I can not pass separating two to another. The instructions are to click on a date "BOLD", but most of the dates are "BOLD", (b) none of them are clickable outside today and (c) the back arrows for the previous month, while only clickable, do nothing.

  I think I have a virus or somesuch and wants to do a restore. Maybe the virus of going to stop.

  WXP SP3 Prof

  Viruses often attack the system restore because it's such a threat to them - which is certainly possible.  Unfortunately, all my anti-virus, anti-malware and anti-spyware solutions are for Vista (which is the Forum, you are in).  You must post this question in the appropriate forum where they have the information, procedures and links to help you.

  One thing, if the system restore does not work in normal mode, it sometimes will run in Mode safe then start safe mode and try it.

  In addition, if you use any Norton product, turn it off, then restart and try to restore again - Norton is known to cause problems with system restore.

  Sometimes, the problem can be solved by turning the restoration of the system off and then back on.  Unfortunately, a side effect of this is to lose all your restore points you want to restore this may not be such a good option to try (even if it can correct the underlying problem): http://support.microsoft.com/kb/310405/en-us.

  If none of the above works, please repost your question on the Forums of XP to: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I uninstalled Microsoft Word by mistake yesterday. System Restore does not bring this back. Any suggestions?

  I uninstalled Microsoft Word by mistake yesterday.  System Restore does not bring this back.  Any suggestions?

  You need to reinstall it from your original installation media or file that you have saved and saved.

• What happens if system restore does not restore dates using xp family

  What happens if system restore does not restore dates using xp family

  Hi mikeR_582,

  · Were able to run the system restore before?

  · If Yes, do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  You can check the link that contains information on the number below: restoration of the system "restore points" are missing or deleted: http://support.microsoft.com/kb/301224