System Restore does not restore

Similar Questions

• system recovery does not reach 50%, presario CO61-312SA

  Presario CO ^!-312SA does not start. Click f11 to start recovery of the system that does not reach 50%. I understand that the wireless switch should be during the restore process, the wireless button will be red or blue? If it should be blue, then I can't go blue... If one red so... it is!

  I bought Windows 7 drives home premium but have no idea how do I reinstall my OS... There are 2 disks for 32-bit and 64-bit, but I can't read the sticker on my laptop to see what I need to use a disc.

  Any information you can give me on any of my questions today will be very appreciated, thank you x

  Hello

  You have a few options in my opinion please find the steps below may help you solve the problem.

  (1) Please run the hard drive & memory test and check if any part fails, you will have to replace the part. If both the test passes you can call the HP technical support to order the recovery again disc.

  Test a hard drive by using the Built in Self Test

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• 90 b system fan does not

  System fan does not, please stop, press ENTER to continue... 90 (B)

  Laptop Presario CQ57

  Windows 7 Home premium, 64-bit OS.

  Product number B1Q23EA #ABF, still under warranty, purchased and resident in France.

  If I need to send for repair, please provide French tosend address him, thank you.

  Thank you, but I do not read or speak French well. I decided to open it and look for the dust bunnies.

  I found a tiny and removed dust Bunny, and the problem is now resolved. 4 months to break a fan, not impressed.

  My last laptop was a rabbit from the dust of the size of a gerbil before he started to complain... I don't know what my next laptop purchase will be, and what makes it not. Thanks for the reply.

• 'System.DateTime' does not contain a definition for 'HasValue '.

  I develop a lightswitch application. But me make mistakes trying to build the application:
  using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Text;
  using Microsoft.LightSwitch;
  namespace application
  {

  partial public class Section
  {
         
  SectionDisplay_Compute partial Sub (Ref DateTime result)
  {

  If ((this. Course! (= null) & (StartDate! = null) & (teacher! = null))
  {

  Assign the result to the value of the desired field

  result = String.Format ("{0} ({1}) [{2} - {3}]", Course.CourseName, Teacher.UserName, StartDate.ToShortDateString (), ((StopDate.HasValue)? ") StopDate.Value.ToShortDateString (): "'));

  }

  }
  }
  }
  This is the code. Get the following errors

  Error 1 'System.DateTime' does not contain a definition for 'HasValue' and no extension method 'HasValue' accepting a first argument of type 'System.DateTime' could be found (missing are you a using directive or an assembly reference?)
  Error 2 'System.DateTime' does not contain a definition of 'Value' and no extension method 'Value' accepting a first argument of type 'System.DateTime' could be found (missing are you a using directive or an assembly reference?)
  anyone help me please in this ASAP?

  Hello

  What operating system is installed on the computer?

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Hope this information helps.

• Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop

  Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop

  Hello

  Information KHATRA.exe
  http://www.bleepingcomputer.com/startups/not_used-24897.html
  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• can I track a pop3 server on a system that does NOT have the client insta

  Can I track a pop3 server on a system that does NOT have the client.
  With the new serfvice on a system and specifying the name of the intellectual property of a remote control in the config file
  running pop3 system. In the config file, it asks a unsername and password. Is it necessary
  and if so what are the permissions the user must?

  > Can 3.0.3 hyperic Open Source apop monitor (which takes place
  > on 1110. I tried to use the pop3 plugin but got the
  > errors I listed to the original problem. We do not run pop3
  > but run they apop.
  > Is - can anyone help with that?

  The pop3 Checker will not work with apop.  Apop Protocol requires that we send a MD5 hash with the user name.  We can, adding this ability.  In the meantime, you can simply use the Socket TCP Checker to make sure that the port is up and listening.

  -Ryan

• My computer sometimes suddenly restart after disk defragmentation and applied restore.it system still does not work. Can someone help me? : ()

  I need help on my computer, it's a window Vista Home Basic. Sometimes my computer rebooted or encountered problem blue screen. Is it related to my anti virus program or any hardware or software failure? I try to solve it, Defrag disk and system restore, but it still does not work.

  Do you have an antivirus installed? Otherwise download, update and scan with this

  http://www.Microsoft.com/security_essentials/

  Follow these steps

  http://support.Microsoft.com/kb/929135

  and this

  1. Open an elevated command prompt. To do this, click Start, click principally made programs,Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833
  http://www.howtogeek.com/HOWTO/Windows-Vista/verify-the-integrity-of-Windows-Vista-system-files/

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• System recovery does not work?

  I have a HP Pavilion dv2910us, and I need to perform a recovery system on my laptop. I tried to press F11 when the computer starts, and it does nothing except it emits a loud beep and continues on its way, commissioning. So when it does not work, I came across the site of HP to look for another way may be to perform a system recovery that I never knew. I found that I can open the Recovery Manager in my Start menu and run the operation there. I tried about 15 times, following the specific steps that were given to me and even another way, that I found on the forum. All that happens is my computer restarts and I get into my account and it's the same as it was before. I really need perform this system recovery. I already moved the files that I need to save to an external hard drive, and I really need to solve this problem. What I am doing wrong, or how do I restore my laptop to factory in another way?

  Additional information: my product number is FE989UA #ABA and the series is 2CE8200Y5Q.

  Message edited by snowshoe on 24/07/2009 22:36

  sha3ko wrote:
  I have the same problem, and from what I know, if you have upgraded or downgraded your computer (in other words, if you reinstalled the operating system other than the original) it will cause corruptions on the recovery partition in drive D. I tried to find a way to retrieve the recovery partition, but it seems that there is no way unless you are a computer genius. My final solution just order a set of hp recovery disks, but I'll try that before I pay for it. Good luck with yours.

  Try this >

  1.right - click on the "Computer" icon and select manage.
  2. This will launch the Microsoft Management Console.
  3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
  4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
  5. when the warning message appears, select 'Yes' - restart the notebook and it will automatically start in the Recovery Manager without having to press F11.

• XP - D: disk system recovery does not

  I need to do a system restore in XP Home Edition on a Dell computer where my D: drive does not work.  Is there a place on the Web sites where I can access this version of XP and provide my license number and the name and download it online, without going through my D: drive?  Thank you.

  I'm sorry, but there is no way to download Windows XP.

  Many Dell computers have a built-in recovery partition that can re - load Windows from scratch.  To access it, press Ctrl + F11 at the BIOS boot screen, just after starting the computer.

  If this does not work, here are some other possibilities:

  1. replace the CD drive.

  2. some, but not all, computers can boot from an external USB CD drive.  Who may need to change some settings in the BIOS.

  Before a re-installation, save all files in significant on an external disk.

• Update Vista error 80070507 and peripheral system that does not work

  Title: updates Windows Vista installs not because of error 80070507 and there is a system feature that does not work, but I don't know that that or how to fix it.

  Windows Vista updates do not install due to error 80070507.  He also seems to be a problem with a device in the system does not and I do not know that who or how to fix it.  Had to do a system restore not so long ago and I've had problems since.  Help, please.

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Perform the steps from the link below and check if the problem persists.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
  Hope this information helps.

• The system configuration does not

  I am running windows 7 and decided to try and resolve messages running and (does not) slow programs. I started to perform a clean boot, but when I had made the changes to the configuration window and clicked on OK the said title bar system (not responding) after waiting a considerable amount of time, I have not quit. When I return to the system configuration window, nothing has changed, but now my PC guard just hung in the system configuration window. The computer is now worse than when I started. I had not done something before.

  The first thing I recommend is to restore and filled to half of the changes that have been made with the System Restore utility. First to save open documents and close all programs and then click Start (or press the Windows key) and type s·ymakeUPS·e·Mr r·emakeUPS·o·r·e then select System Restore programs from the list above. When the system restore starts, click Next and choose the most recent restore point that precedes your attempt to create a boot environment. Follow the rest of the procedure described in this article.

  Restore system files and settings

  Once you have recovered your computer to its state before the attempt to establish a clean boot environment, start with an analysis of malware using a free scan like MalwareBytesanti-malware utility.

  It comes as part of the standard offers free and paid-for versions. For standalone scans and malware removal (but not real time analysis), the free version is usually more than enough.

  MalwareBytes.org

• system tray does not load win xp

  J’ai été déconner tout en écoutant quelques tunes'Dick' que je suis » !. and some how now my systemtray will not charge you only see the clock and no system tray icon that shows generally my Norton security and other active startup programs? and in the properties of the taskbar hide the inactive box icon to check! has grayed? so I can't bring this from there and I've been at it for hours and I have tried everything with no luck! Any idea of it please? Be most appreciated

  Hello

  Because looks like it's fairly new, I suggest trying a system restore.

  Please see this link. http://support.Microsoft.com/kb/306084

• 10.6.8 startup disk System Prefs does not route El Capitan

  I have a mid 2011 13 "MacBook Pro ("MBP").

  It worked 10.6.8

  I use SuperDuper to backup bootable external hard drive to the top.

  I have the 10.6.8 cloned system and it is bootable from an external Lacie Rugged Triple HD, connected via Firewire.

  I installed 10.11.3 on the MBP and it works fine.

  I need to boot from the 10.6.8 backup to access some files and that worked fine.

  When this 10.6.8 HD is connected via Firewire to the MBP shows up in startup disk options while it is started from 10.11.3

  But, now I want to reboot of HD in MBP 10.11.3 can't do running.

  When the startup disk is open when running 10.6.8 from the external hard drive the internal drive in the MBP 10.11.3 running does not appear as an option to restart the system.

  Y at - there a trick to getting the HD 10.11.3 appears in the startup disk?

  If not, if I just stopped the MBP and then remove the external hard drive, the MBP starts its internal HD with 10.11.3, despite the fact that I am not able to select it from the boot disk before you stop? /

  Thanks for any help in advance.

  This is because in SystemPreferences-> StartupDisk disc is not set how you want to start.

  To avoid this kind of situation when the two BONES are connected:

  Hold down the Alt (option) key during startup: it will open the "bootmenu": choose the OS disk to use.

• Why my system preferences does not open?

  

  Hey guys! I posted my system specs before you start.

  Anywho, after a fresh clean install of OSX El Capitan (because my iMac crashed recently and I had to wipe my hard drive completely... Yes, there was a lot of tears), like, literally yesterday, I can't open my system preferences. As I click on the sign of the Apple at the top left, then go to System Preferences...

  This is what happens...

  The small system preferences icon bounces just bounces... bounce... and then... nothing... to frikkin' ever. I have to force it to quit. I try again and again, same thing. So, I go in Applications run in 32-bit mode, try again and guess what? Celestial tracks. No problem... UNTIL I try to choose an option, any option, and he ALWAYS tells me it need to restart System preferences to open whatever it is, then proceeds to give me spinwheel thing... and then crashes and I have to force quit... again.

  So, I suppose, in 64-bit and 32-bit, it does not work properly. And Yes, for the love of God, I already tried the delete your whole com.apple.systempreferences.plist, but also the other things that other forums will tell you to remove in system preferences.

  Note: another issue, I felt at the same time, it's that for the life of me I can't Time Machine to notice my external hard drive. I tried updating all the disks on my external hard drive, repair permissions, first aid, USB 3.0 update, power cycling, rebooting with alt + cmmnd + P + R, single-user mode, fcsk, safe mode, most first aid,... like, what the hell is happening? Laughing out loud

  -

  Drew

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Lenovo P780 system update does not work

  Hi all

  i, m using Lenovo P780 4 GB

  at the present time the OS P780_ROW_S115_130807 worm

  4.2.1 Android

  I try update day but not workin after I download the update I chood update now, it will restart but nothing happen is like restart as usual, the update does not show

  any idea or not can do to update?

  Ok... You are grounded. Have you removed all the apps system? If you have done which causes the failure.
  Did you also change the replenishment of stocks?

  In this case, the best way to go is to factory reset the phone and try again to OTA update. (If you have changed the rebuilding of inventories with a recovery of CWM or TWRP, factory reset will not help). You can also try the smart Wizard after the reset.

  Important: Please ensure that the download and dosent of process (update) install get interrupted!

  Let me know how it goes.