System Restore doesn't have error 0x800703f1

Similar Questions

• System Restore doesn't have restore points. What should I do?

  Original title: System Restore problem

  Why my "System Restore" gets none of the restore points? I've restored this computer before. Any suggestions as to why would be very appreciated. Thanks Jack

  Hello

  1. have you made changes on the computer before this problem?

  2. did you disk cleanup?

  3. why you try to run the system restore?

  4. do you use your computer in dual-boot configuration?

  This type of problem usually occurs due to threats of viruses or due to cleaning of the computer disk. I suggest you to scan for viruses and to check if it helps.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Once you are done with the antivirus scan, try the steps in the following Microsoft article and check if it helps.

  System restore points and shadow copies of files are missing after you install Windows Vista Service Pack 1: http://support.Microsoft.com/kb/945681

  No restore points are available when you use Windows Vista, Windows 7 or OS Windows Server 2008 in a dual-boot with a previous Windows operating system configuration: http://support.microsoft.com/kb/926185/en-us

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Hope the information is useful.

• System Restore doesn't have access to the administrator account

  Hello

  Yesterday, I created a new username on my PC under Windows 8, but unfortunately I typed the wrong outlook address, so there is a user account on my system with an address from outlook that is not mine and I do not know the password.  To make things worse, I seem to have made my own local users represent a non-administrator, so the only administrator user account on the PC is that I can not enter and do not know the password.
  If I could somehow reset the system back to how it was before yesterday, everything would be fine, but I do not know how, because I don't have an administrator account.
  Any help is appreciated!  Thank you.

  Thanks for the help.  I just reinstalled Windows 8 in the end - I had everything backed up anyway, and it seemed like the easiest option.

• System Restore indicates an unspecified error has provisioned & you files have not been changed?

  When I try to use the system restore, I get this error as follows... (an unspecified error has provisioned & you files have not changed) I get this same error even using different activation & restore points. I don't know how you can even get an UNSPECIFIED error, seems to me if a mistake has provisioned & he knows it's a mistake he would know what is the error. In my opinion, this error message no sense at all... I'd be happy to hear this error message explained or all thoughts. Thanks for any help...

  Kind regards

  Dale

  Hello

  happy to help

  Norton is the main problem

  Thanks for the reply

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• I have Win XP and my system restore doesn't give me an option to reset to an earlier date. This option is not yet available in my file system

  When I go to start, Control Panel, system and click on system restore, there is no option for me to use the system restore back to an earlier date. I downloaded WinZip and it said I had grown pilots. NA not have money to pay for the update of the driver of Winzip, so I went to intel and had updated the drivers. After that, my pages was ok, full screen. But this morning when I turned on my computer, my office is full screen, but all the fonts were tiny! Then when my screensaver is, there was black on both sides of the photos and the photos were more full-screen. Some were on the right, the left and come inn in the middle with black on both sides. I could hardly read my icons on the desktop. I went to view and enlarges the most important fonts. But I have nothing I couldn't even my Web pages to fill my screen. I removed the update of the driver of WinZip from the computer. So, I don't know if it's happening on the site of Intel or where I updated without updating the driver of WinZip?

  I tried to use my system restore because WinZip Optimizet n did not check for outdated drivers, I never should have gone to Intel to update. My Internet Explorer opens full screen but the pages he pulls up is located in the middle of the screen and I can not develop full screen.

  Is there anyway that I can get my system restore to open so that I can go back to an earlier date and have my computer back? All that is on the page for my system restore is: System Restore can track and reverse harmful to your computer changes: a box to check 'Turn off System Restore': disk space: and the State: (C): monitoring. That's all.

  Hello

  I recommend you to run the restore of the system from safe mode.
  See the articles below for more information.
  How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP
  http://support.Microsoft.com/kb/304449

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
  http://support.Microsoft.com/kb/302796
   
  I hope this helps.

• I have the same problem. When I do a system restore, I get an error message. The service of shadow copy of Volume used by the system restore does not work. Error 0 x 81000202

  My security service center cannot be started too.

  Hello

  Malware scan

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  7.  

  and try to do a restore mode safe

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  7.  

  and if using norton disable product anti-forgery protection

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

• When you try to perform a system restore, I get an error saying: "an unspecified error occurred during system restore." (0 x 80070002)

  original title: System Restore problems

  Hi, I have problems, perform a system restore using windows 7. I get the message: "an unknown error occurred during system restore. (0 x 80070002). any help with this problem would be appreciated. Thank you very much.

  Hello

  This applies to vista, but use it for windows 7

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and issues of windows 7

  Here is the vista forums

  Try the repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Trying to turn on system restore, I get an error 0x8000FFFF catastrophic failure. Can anyone help?

  System Restore died in Win 7 64 bit. When you try to turn it on, I get an error 0x800FFFF.

  Hi Abe Iskander,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Method 1: Try to perform the SFC scan on the computer and check to see if you can turn on system restore.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: You can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information helps.

• Missing icons and the system restore failed with the error code: 0xc0000022

  More a cosmetic problem, but it is annoying me.  I wonder if anyone can help.

  I'll try to explain what happened and explains the steps that I tried to solve.

  At the launch of windows, after connection, some icons began to miss on the desktop.  Below, these appear to be programs of Microsoft and Apple.

  

  If I choose to properties and then change icon... from the office, I get the following error:

  

  Icons for mainly products of Microsoft and Apple are also missing from the start menu.

  

  However, if I go into properties here, the change icon... button is grayed.

  

  It happened once before.  I tried to run the system restore.  The last time I did this the system restore said have failed - however, the icons were restored.  I tried the same thing again once, however the system restore has not (yet), but this time, the icons are still missing.

  

  I tried to create a new user, but the new account also has the missing icons.  I also ran a full virus scan (Avast) and Windows Defender, but they found nothing.

  While not a huge problem, it's annoying, and I wonder if it points to a bigger hidden problem.

  Any help would be appreciated.

  Original title: lost a few icons on the desktop and start menu.

  Hello

  Thanks for the reply.

  You try to follow the below link to uninstall Microsoft Office 2007 and see if that helps.

  How to uninstall the suites Office 2003, Office 2007 or Office 2010 if you can not uninstall in Control Panel?

  http://support.Microsoft.com/kb/971179/en-us

  If this does not help then, try posting your question in the forums of Microsoft Office 2007 and see if that helps.

  Microsoft Office 2007

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007?tab=threads

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• my system restore gives me an error message, I'm ready to just do a factory restore, but it will not accomplish the restoration for some reason any!

  I did somehow something wrong and all seeking a srnt file for me through my business network that I managed to sync all my files via Adobe reader that supports only those of the doc and therefore prevents me to open any file or program etc. of my application files.  I am at my wits end I need to this computer, I'm in the middle of the tender of work and my spec and plans are those files and also my full runs super slow or not at all, nothing wants to establish a connection - my home page, my Web browser is just nothing is right, so I just want to go back to the box start. HEPL!

  Hi stephen almond,.

  Thanks for posting that query you in Microsoft Communities. You are not able to perform the system restore. Provide the following information:

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Work on a domain?

  Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Answer with the information required to help more.

  Thank you.

• System Restore does not work; error code 0 x 80070715

  System Restore will not restore an error occurred in the initialization of the program if the problem persists contact your system administrator. I tried 3 times still not work error code 0 x 80070715. Help, please.

  Hi margZX

  See if this post by Stephen Boots helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/how-do-i-fix-an-error-code0x80070715/c73c6aa1-0770-E011-8dfc-68b599b31bf5

• a system restore. now, I have only a picture of office.

  has problems with the PC and did a system restore.  After restoration, released on very well connected and office came.  nothing, no taksbar, start menu, nothing.  only the peak of office.  No, I can't do another restore of the system in safe mode.  Made mode without failure/invite commands and typed in systemrestore, etc..  nothing after hitting enter.  do not go to the recover window.  Help. any ideas?

  To run the system restore from a Safe Mode command prompt, you follow the procedure described in the following article?

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  Something else you can try...  When you get the white screen with the screen, try hitting Ctrl - Alt - Delete if you have XP Home Edition, the task manager should start.  If you have XP Pro, a window will appear and you can select 'Task Manager '.   After starting the Task Manager, click on the 'Applications' tab, and then make a file-> new task or click on the "New task" button at the bottom.  In the next window, enter "Explorer", click on "OK".  With luck, you get again.

  HTH,
  JW

• System Restore doesn't let me when I first installed xp. How can I make a point of initial system check?

  I have not installed xp mysrelf.

  This is normal.  System restore points are purged after 90 days.  System Restore also has a feature of space management of automatic restore point that purge older restore points to make room for the new, while allowing the user to recover from the recent destructive changes.  By default, up to a maximum of 12% of the disk hard is allocated for restore points, even if it must be manually reconfigured to 1 GB.

  In any case it is generally not a good idea to restore to a time more than a week or two ago, because too many events that are not controlled by the system restore will be arrived in the meantime.

  In addition, the restore points are chained together, so that you cannot save a former and delete the most recent.  This will break the whole system restore function and require you to serve all points and start over.

  For more information about system restore, see http://bertk.mvps.org/index.html

• HP mini 110-1129nr with windows xp home edition, following the file is missing or corrupt \windows\system32\config\system model doesn't have a cd/dvd drive. Help, please!

  HP mini 110-1129nr with windows xp home edition, on said boot computer could not start because the following file is missing or corrupt \windows\system32\config\system computer has no cd/dvd drive. Computer does not load in safe mode, I ran disk hard main test self test it says completion test: failure, check the status: 7 (filled with the read element of the test failed). Help.

  You need an external DVD drive to get the repair will.

  Also the device you own does not seem to have built in the recovery partition. I'm not sure about later versions of this machine, however, it is best to check with HP.

  The problem is that there is a corruption of the registry on your OS or the system could not find where the registry files are due to system files or boot corrupted file.

  A repair can be made with an external DVD, the worst case, is that if the repair doesn't work you reinstall Windows.

  See this page from HP