System Restore, now all I have is a white screen

This a gateway MT6451 laptop with an AMD Turion 64 X 2 Mobile Technology TL - 50 256 KB x 2 L2 Cache, clocked at 1.6 GHz, 1600 MHz processor Hyper Transport technology, running Vista Home Premium. After the reboot, I suspected something was wrong because my computer started acting strange, slow, would not open Internet Explorer without having to restart a couple of times... ect. A friend suggested you do a system restore. I chose the first available date and received a message that the action could not be completed. Then I chose the next earlier and had to leave to go to work. When I got home, there was just a white screen. I restarted and when it got to the point that it should have been at the level of the office, there was just a white screen. I tried to restart once or twice more, same result. I discovered that I can access files via the Task Manager, but it seems I can only access data files. If I try to start a program such as Internet Explorer, I get a message that the file is not found. Thanks for any help, that all the world can offer.

Hello

Since you choose the earlier restore point, it would have een referenced to a point when the computer is in the initil stage when it has again been updated.
Please follow the steps mentioned in the article and view the results.
Method 1
 
Start your computer in safe mode
If the question presists then try,
Method 2
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Please follow step 7 in the above mentioned link to start the computer in normal mode.
See also,
 
Why my screen is black when I start Windows 7? (For Vista)
: Note follow all the methods mentioned in the link above by decree for efective troubleshooting.
Method 3
Run a SFC system analysis

http://support.Microsoft.com/kb/929833

I hope this helps.

Tags: Windows

Similar Questions

  • I lost the office and all programs-system restore will not work. Now, all I have is a blue screen.

    Original title: I lost the office and all programs-system restore won't work

    I don't know what happened, now all I have is a blue screen, if I click on programs it says 'empty' can not get on anything

    Hello
     
    1. what exactly happens when you try to perform the system restore? If you receive an error message then, send the same return.
    2 have you made changes on the computer before this problem?
     
    Please answer these questions and to provide more specific information on the issue. This could help us help you better.
    The following articles could be useful.
    After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
    http://support.Microsoft.com/kb/318027
    When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
    http://support.Microsoft.com/kb/941248

  • hard drive failure, System Restore, now all of my media and documents files are missing, just GONE. all ideas

    I was workiing online, and I started to have problems with ie10, freezes, stop down, and then the entire HDD crashed, any program, file system went. System Restore used to regain control of my computer, but now all my media files, music, photos, everything is over. How can I identify and restore them. Documents open in word, but there is no trace of them in the library files... etc.

    Your hard drive has failed. If she had done this you would have to buy and install a new one, and you would have lost everything.

    If it just crashed and you have used system restore and running to get to the top, then all is not lost, probably... unless the files are damaged by the accident.
    Do a search on your hard drive. To find the word docs using "* .doc" (without the ""). To use "*.mp3" mp3, wmv files use "*.wmv" etc. The asterisk (*) is a wildcard and the search results will include all these files, the research is on your hard drive.
    Make note of their location and then reorganize their or re - point your assets their location.
    See you soon,.
    Jerry
  • SAMSUNG RV510 laptop computer and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green.

    I have a SAMSUNG RV510 laptop and the built-in webcam was working before and now, if I have the webcam the screen is in night vision which is entirely green. I tried to restore and re - install the drivers and even removed the chip back and webcam is plugged in but nothing works.
    Please give me a solution for this.
    Thank you

    See its unlikely a MS or Win, Samsung help/support solution or their forums, its their equipment and their program

  • Nothing will not load. All I have is a black screen

    Nothing will load after you download the app on the iPad. All I have is a black screen. Help, please.

    I even deleted the app and redownloaded

    Sorry, you've got some trouble. It works now?

    Guinot

  • I'm trying to open a photo in camera raw and all I get is a white screen

    I tray to open a photo in camera raw and all I get is a white screen

    Most likely, you should uncheck use graphics processor in the Camera Raw preferences.

  • How to make a XP System Restore disk? I have XP on my computer now and I want to back to original specifications.

    I have XP on my computer now and I want to back to original specifications. I need to make a system restore disk, but I don't know how.

    Try Symantecs Ghost available here

  • a system restore. now, I have only a picture of office.

    has problems with the PC and did a system restore.  After restoration, released on very well connected and office came.  nothing, no taksbar, start menu, nothing.  only the peak of office.  No, I can't do another restore of the system in safe mode.  Made mode without failure/invite commands and typed in systemrestore, etc..  nothing after hitting enter.  do not go to the recover window.  Help. any ideas?

    To run the system restore from a Safe Mode command prompt, you follow the procedure described in the following article?

    "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
      <>http://support.Microsoft.com/kb/304449 >

    Something else you can try...  When you get the white screen with the screen, try hitting Ctrl - Alt - Delete if you have XP Home Edition, the task manager should start.  If you have XP Pro, a window will appear and you can select 'Task Manager '.   After starting the Task Manager, click on the 'Applications' tab, and then make a file-> new task or click on the "New task" button at the bottom.  In the next window, enter "Explorer", click on "OK".  With luck, you get again.

    HTH,
    JW

  • My computer crashed so I did a system restore, now I can't restore it

    now my dvd, cd, windows media player and a bunch of my programs do not work, my system restore appears as a blank page, I've tried all the backdoor programs I can think of and still nothing. I need either reinstall my dvd so I can use my boot drive or find the right file to execute the version debug or safe mode HELP me please! I want to return to the default value of the factory. Or solve the problem, but I have to do something. At this point I don't care if I lose all the things I have on my computer because most of the time I saved online them for example. my photos and others. HELP me PLEASE before I take this CPU and place it under the wheel of my van and run it until it is has little pieces in my gravel!

    Thank you

    Lisa

    Hello HOK CHHEANGUNG.

    Looks like you dΘmarrez not yet to the point where you can choose to enter the BIOS.

    I recommend you contact the manufacturer of your hardware on this.

    Also, I recommend you create a new thread for this case because there will be subtle differences between your question and the one mentioned in this thread.

    Let us know if you have any questions.

    Best regards

    Matthew_Ha

  • Cannot connect to the network or perform system restore after installing updates have been

    WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

    I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

    I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.

  • SR5223WM: SR5223WM with vista system restore now no. Internet, network adapter or Ethernet controller

    do you have a system restore, but now no internet, no file Ethernet controller or details available, only one network adapter is noida nforce networking controller. How to find the correct drivers to reinstall? Thank you!

    Hello:

    Ethernet controller with the ID of PCI\VEN_168C & DEV_0013 is a wireless Atheros made by Netgear adapter.

    It was not standard equipment on your model.

    You can download the driver from the below link at the top right of the page.

    http://support.NETGEAR.com/product/WG311T

    After downloading the file, unzip it and run the setup.exe file in the folder.

  • After the removal of malicious software through the system restore, now some applications don't work

    Control Panel... Help and Support... do not work... I get this message on both of these and other:
    Rundll32.exe not found Application...
    When I try to access some also uses Open with open... This has not happened before... I think I lost something that needs to be restored... BTW I tried the system restore to get rid of malware... It worked (obvriously) but only up to a point... Now, some applications do not work...
     
    Thank you
     
    Elaine

    Then when you get your rundll32.exe work, follow these steps:

    Looks like your Windows file associations have to dispose. This means that XP is not
    know what to do with the files by looking at the file extension (for example, .exe for executables,
    .doc for MS documents, etc.).

    If you don't have it you, something done for you - most likely malware.

    Go to this site WWW by Doug Knox:

    http://www.dougknox.com/

    On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

    Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

    Run the following scans for malware, and then fix any problems:

    Download, install, update and do a full scan with these free malware detection programs:

    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    They can be uninstalled later if you wish.

  • System Restore, now INTERNET NO connecttions available, and Norton is disabled

    I downloaded a specific file relating to a VST in a DAW. He brought a bunch of * on my computer--none of this seeming harmful, just annoying, so I did a system restore. There is no 'available' internet connection, Norton is off, etc. I don't have access to a phone at the moment, I'm using my friends computer. I'm sorry if this has been asked, but I feel like I'm pressed for time, if this is actually a bad thing.

    Hi Thorrin,

    1. What type of internet connection on the computer do you use? What is a wired or wireless?
    2. You get the error message? If Yes, what is the exact error message?

    It is likely that the network driver is damaged, because of which you might face this problem. Follow these methods to solve the problem:

    Method 1:

    First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    I suggest you to refer to the article and see if it helps:

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

    Let us know if you need more assistance. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  • She launched 'System Restore' now the computer will not complete the installation

    Clean HP Pavilion bought in 2003.  With the help of daughter for school work.  Computer running very slow.  A ran all the relevant boxes virus / malware scans, the old deleted files ' ran fix disk, disk cleanup and defrag, still running slow.  A ran the 'System Restore' edge (press F10 during boot).  It works through the restore program and sit as I just opened the box.  Through the implementation of procedures and click Finish and it is just there for up to 6 hours before I finally gave up.

    Oh Dear Brian, I hope there is no data file on the computer, you will need in the future. The F10 key is the path to the system recovery that restores the computer to the factory settings. It comes to the computer when it was bought new in 2003. It erases all the data files and installed programs from the drive. In other words, you start again:
    http://www.pctechbytes.com/HP/HP-recovery/

    What is the exact model of HP Pavilion?

  • My system restore function seems to have stopped working

    Whenever I try to use my system restore feature, it does not. Was going to fine a month ago.

    Hi AnthonyBurtenshaw,

    ·         You receive an error message?

    ·         Did you do changes on the computer before the show?

    I suggest you to follow the steps in the Microsoft Knowledge Base article mentioned below and check.

     

    The system restore service does not work in Windows XP

    http://support.Microsoft.com/kb/841568

    Let us know if that helps.

Maybe you are looking for