System Restore will not restore the selected date, even if the date is in bold in the home
It just says: cannot restore the selected date
Usually, this is caused by your anti-virus program is interfering with the system restore. Norton is especially guilty of this behavior. Try restarting your computer in Mode without fail (repeatedly tap key the F8 key during the restart of the computer), and then perform your safe mode system restore. When it restarts after you perform the restore, allow him to start in normal mode.
HTH,
JW
Tags: Windows
Similar Questions
-
After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning
Hello
If you use Norton, which could interfere with the restoration of the system.
Disable Norton while doing your system restore.
See you soon.
-
I am running a version of Microsoft "Vista." I want to do a "System Restore" to a date earlier than the 'Restore Point System' which is steeped in external memory of my terminal (and apparently in memory of boarding school of the terminal). The terminal shows only the "System Restore Point" that I had introduced manually; How replace this erroneous 'system Resote Date Point' so that I can get rid of things that I wish were not included in the drive of my terminal? Specifically, the "Ready Boost" option has ruined my terminal memory drive; That's why I want to get rid of with a "restoration of memory", but there is no other precedents "System Restore" options.
Hello
You will be able to perform a system restore to a restore point created or present on the system. If you have no restore point created before the questions, then you will not be able to restore it.
For more information, see the following articles:
System Restore: frequently asked questions
If you try to uninstall an application, you can read the following article to uninstall the program.
You can see the following link to uninstall the screensaver.
You can also try disabling readyboost and check if it helps.
-
computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers
Hello
You should not have a password to reinstall Vista.
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Try to burn a CD. The system will not recognize the blank disc or let me burn__
Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted
Hello
Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.
If no joy:
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
When I try to do a system restore the computer tells me that I have errors on my local C drive
Original title: problem windows 7
When I try to do a system restore, the computer tells me I have my local C drive windows errors tells me it will check the disc if I do a restart, but when that happens it is cannot do anything it drives me crazy what can I do
was soon Micky
Your first question should be is my hard drive works fine.
To do this, you must download and run the software from the manufacturer of your hard drive. Answer back with the model number of your hard drive and we will provide a link for download.
- Beginning
- type device manager in the text box
- Click on Device Manager
- Click on hard drives
- you will see the model number.
If she passes the test, then you can proceed to run chkdsk.
- Beginning
- All programs
- Accessories
- Right-click on command prompt and choose Run as administrator
- In the black box type chkdsk c:/r
- Then accept her offer to run at next boot Y
- Restart your computer
- It will take 1-3 hours depending on the size of your disk. Don't stop, once it starts.
-
PS5 will not change the date registration
PS5 will not change the date when I save a document I'm working. I tried save as and save and it keeps the date of the photo, in this case, a scanned image that swept the 09/07/11 @ 15:49. I saved many iterations of the PhotoShop photo and the date remains the same. I tried it with other photos and even once, it retains the original date. If I open in AI5 and save it, he recorded with the current date. Am I missing something here?
I use the current build 12.0.4 x 64, Win7 Home Premium
PAM
Chances are Windows found the folder a folder "photo", and explore does NOT show you the date of the modified file.
Personally, I hate having "automatically" selected multiple views for me, and I tweaked my copy of Windows so that it always shows me the "General items" view all records, be they full of photos or music or something else.
You can check this by clicking on the name of the folder in the Navigation of Explorer (left), and then selecting Properties. On the Customize tab, see what it says in the "optimize this folder for:"selector. ". If it is different from the general items, change it to general Articles. This gets you a good "Date Modified" column, indicating the date of the file.
If you want to make a permanent change to Windows 7 (so all new folders are displayed in the form of General items in the folders, and automatic display selection is disabled), a value can be added to (or changed in) the registry as follows:
Registry key: [HKEY_CURRENT_USER Settings\Software\Microsoft\Windows\Shell\Bags\AllFolders\Shell]
Name of the Data Type value
FolderType REG_SZ NotSpecified
-Christmas
-
Any ideas on why my Airport Extreme will not recognize the system after the integration of the time Capsule in my system? Continues to have a flashing yellow light after trying all suggestions of technicians from the Apple Store and Internet provider.
Since we don't know all what has been tried, we will have to start from the beginning if you don't mind.
What exact models are your AirPort Extreme and Time Capsule? What is the brand and model of your modem Internet? I'll assume that Extreme is your "main" router and is directly connected to the modem by Ethernet... correct?
Do you have the Time Capsule (TC) connected to the extreme, by wire or wireless? What is your goal for the TC? In other words, will not be used to extend the reach of the extreme wireless?
-
original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem
my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem
Hi Glennisidore,
Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.
-
How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.
Use this tutorial:
http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html
Go to method 3.
3. for the network icon.
(B) to activate the icon network - Enable_Network.reg< click="" to="">
* Don't forget to restart to complete the procedure. ***
-
Windows vista Media Center will not download the latest options for my region. It is under the TV signal, TV download
configuration options. When I finally get through all the steps I get only 1 station with a signal strong enough. I was able to get much more than that in the past.Hello
I suggest you to follow the steps in this link and check if it helps:
Check if that helps.
-
the commands > clean XHTML... and now the document will not be up-to-date on external server
Please help, it is appreciated. I was faced with a document that had gray out code and not editable. So I followed some advice here to use commands > clean XHTML...
Now it will never update. I have download all the chages again and it never effects of the site. I demolished the file from the remote server, and there all my changes. But it will not change the site (runwiththepack.net) document (index.html)
I have had a warning before I performed the clean up of HTML, but ignored. Can someone give me an idea where to start the search for a solution. I think that the site is running a model off the coast and add these changes to all model-if it exists... Please help
Thanks in advance
Eric
Looks like you might be confused about what do models DW (.dwt files).
Model DW are not used by the server, they are only used locally by DW himself. Download a .dwt the server does nothing for the child pages on your server.
When you change a .dwt file, DW asks to update all the pages associated with it (you might have broken depending on whether the error). When you click "Update" DW changes all child pages associated with the .dwt locally. You then download all of these child changed pages.
The .dwt itself needs to be on the server, if you plan to share it with someone.
If you do not use a .dwt, could you explain your workflow a little more in detail?
-
Windows Photo Gallery will not save the edited images
Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot
Message says photo library was beset with problems and the modified file cannot be saved
Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot
Message says photo library was beset with problems and the modified file cannot be saved
================================================
Windows Photo Gallery... Cannot save modified photos...No guarantees and proceed at your own risk!
Good luck...
--
(1) try to do a system restore to an hour before
the problem started.With the help of the Windows Vista system restore
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/--
(2) I've seen reports that this problem may be related
Kodak Easy Share software. Installation "Kodak
Single-action Version 8 for Windows from the
the following link may be the solution.Kodak Easy Share 8 software version
http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
(FWIW, it's a good idea to create a system)
restore point before installing software or updates)--
(3) I saw reports that could clarify the next steps
until the question...Right click the library icon and choose
"Run as Administrator"--
(4) I copied the info from a tech forum on
the net... I don't know if it works, but maybe it's
worth a try:A. right click on Task Manager open the
taskbar on the bottom of your screen and choosing
The task in the menu Manager.B. click the tab process, along the upper part of the
The Task Manager screen.C. in the process tab, select the corresponding button at the bottom
left of the screen that says "show processes of.
all users"and click on it. Click 'Continue' to the UAC
the prompt that appears.D. the screen should turns off a moment, then
back with much more than process listed. Click
the "Command line" column to sort the list and
Search:"C:\Program Files\Windows Media Player\wmpnetwk.exe"
Read the description in the next section on:
Windows Media Sharing Service reader network
F. click on this process. Click the end «»
Treat button"at the bottom right of the screen.
Confirm 'End process' if necessary.You should now be able to save your changes to
your photos normally. The bad news is that this
should be performed whenever you start or restart Vista.
And I don't know how to prevent the situation from
in the first place of loading.--
5) posted by: artologik
The solution came to me when I could not recreate
the problem on a laptop with Vista Home.
Everything I could compare, I noticed that the
%Path% environment variable was not between different
the 2 machines.I guess that WLPG relies on the dll must be found
on the way to the system; When not found, it must return
Back to ' base or incomplete "library finds it
the default specific paths or the user. The solution for
me has been to ensure the entire path system
to the folders in the order appropriate.To fix, follow these steps:
A. right click on the COMPUTER icon on the
desktop and choose PROPERTIESB. choose ADVANCED SYSTEM SETTINGS
C. Si you are prompted by UAC to allow, go ahead.
and ALLOWD. click on ENVIRONMENT VARIABLES...
E. in the bottom half, under SYSTEM VARIABLES,.
Find the PATH variable and highlight theF. click the button CHANGE
G. ensure that what starts with
% SystemRoot%\system32;%SystemRoot%;H. ensure you that a semicolon separates each entry.
I. click OK three times
J. restart the computer
Good luck...
John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Windows 7 will not recognize the dvd drive
Windows 7 will not recognize the dvd drive, although it worked well for more than two years. Now I can't access it to install new software.
It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.
It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management. If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?
What now? Is turn off the power, my only option? What happens if it is not yet recognized after that?
Hello
If the drive is viable:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Thunderbird 31 will not download the messages from the pop server (to 24 worked) CAUSED by Avast
TBird updated to version 31, it will not download the messages of my pop server. I can send, but not download messages. I restored Win (7) at an earlier date to return to the version 24 of Tbird, and everything worked OK.
TBird later Auto-setting to update itself (ugh!) back to 31, and we don't go again, no E-mail download. I changed the settings to Win firewall, even tried that turned off completely for testing, without any difference. Retarted Tbird and win several times, no go. It's extremely frustrating. Does anyone actually * test * software updates before releasing these days here?
TBird works very well for me in Linux Mint 16, but this glitch under Win 7 just jumped to the top with the upgrade to 31.
Thanks for your suggestions, you can offer!
the typical suspects are AV and firewall software.
Start * Windows * safe mode with active network
-win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-modeAlways in Windows safe mode, start thunderbird in safe mode
- http://support.mozillamessaging.com/en-US/kb/safe-modeProblem disappear?
-
Windows 7 Media Center will not download the new guide listings
Hello
I am really frustrated. WMC will not download the new guide listings and I tried all the patches that are supposed to be that I found in this forum. I also tried the system restore, which did not fix the problem. Obviously the problem is not affected by the restore program.
I was able to determine that there is some kind of corruption of the WMC files that Windows 7 can not solve (according to the event log).
I'm a bit exasperated at the tenacity of this problem. Y at - it a reliable fix or I need to reinstall Windows 7?
Thank you
Hello Long777,
You have the update for Windows Media Center installed?
Click on the article below:
KB Article ID: 2284742 -October 2010 Cumulative Update for Windows Media Center in Windows 7You may be able to force a manual update. Do an update (weekly) to TV Guide through the menu system.
If this does not help, you might want to ask your specific question to http://.www.thegreenbutton.com \forums
I hope this helps.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
I forgot the username sent mail, no email is back
I am trying to delete one of my three e-mail accounts, your aide said page: "click the Actions of there." I don't see that the selection under "display settings". What I am doing wrong?
-
I would like to replace my drive 160gig hard with the disk hard 320gig on my laptop running xp.
I would like to replace my drive 160gig hard with the disk hard 320gig on my laptop running xp. Is it possible to transfer the exact content from one disk to another without having to re - install operating systems and programs etc. ? I would that a
-
validation of XP-Home Edition product code
Microsoft has a web page where I can enter the product code of my COA to determine if it is a genuine copy? I found the automatic validation page, but it is of no use to me because I can't use my pc. Or, can it be validated by phone - no matter who
-
How to disable and get rid of the annoying Narrator in windows Vista
Can not get rid of the annoying Narrator in Windows no matter how hard I try! Where should I go on my computer! Easy to start, but can't get rid of it now! Thank you.
-
Photo Gallery has hijacked my hard drive! Initially upwards to turn on and I have to remove the screen like 12 times or more. The I t allow me to run some programs like restore or download the upgrades and other things, it seems to occur very randoml