System Restore with the keyboard and the mouse works do not and do not know admin password

Similar Questions

• Open submenus when I stop on them with the mouse pointer does not work

  I used to use Vista Upgrade of XP until it hit the big time. With this installation, the option 'Open submenus when I dwell on them with the mouse pointer' worked perfectly well.  Since I did a format and installed the full installation of Vista version, and now this feature does not work. I checked and re-checked the option in the customization of the menu star and nothing. Also unable to find what anyone at the mouse settings itself.

  Does anyone know how to get this feature to work again once it's something I use a lot.

  Concerning

  Owen

  Hello

  If none of these help or you find a solution please report.

  Does work here on Vista either, but I don't want it works even if it is checked.

  Try UnChecking the start - Customize - Menu tab apply / OK and then go back and save
  Apply / OK.

  If no joy this initiative will eventually.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------

  Maybe something here: [check Control Panel - mouse or TouchPad (as applicable)]

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Single click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I have a problem with the computer work is not correctly after you install the KB2753842 update.

  This update of windows has been installed automatically today (22/12/2012) as the (successful with this date) shows on the Page update.  Since that it has been installed, the computer is constantly read/write on the disc at 100% at all times (i.e. non-stop).  Performance is significantly degraded.  I rebooted several times, whenever the system shows the updates are being configured on tap-dwon and commissioning.  I want to reinstall the update because I think that it was not successful, even if the display update Page shows successful installation.  When I try to find and remove the update under the Panel of control-> program and features-> Windows updates, this update is NOT displayed (latest updates are 13/12/2012).  How can I remove and reinstall this security update?  It is a BIG problem at the moment.  Computer is almost non-functional.  Thnx.

  Original title: update security for windows (KB2753842)

  Nirmal S, thank you.  System Restore did the trick.  I restored prior update checkpoint and then the system automatically re-installed the latest update (which is one I had a problem with).  Problem solved!  My computer working again 'normally '.

  Also, I learned a few new things about the updates and restorations, so...

  Bravo for Nirmal S!

  Kind regards...

• wwhy does keep system restore with the message "an unspecified error occurred during system restore.

  Any date, I chose, whenever I try a system restore, I always get this message-"an unspecified error occurred during system restore", why?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• So that the supply of machinery of vCenter.  Fails on the customization of operating system prompted with the error "windows could not complete the system configuration to try to resume the computer restart configuration.

  Sysprep from Windows fails with the error while the supply of machinery of vCenter. "windows can not finish the system configuration to try to resume the computer restart configuration.

  I use vmware vcenter spec customization here,

  I'd say it's because of incorrect permissions or corrupted registry entry or registry that exceeds 8 KB.

  Please visit https://social.technet.microsoft.com/Forums/windows/en-US/658528ce-6eb5-403b-ae41-458147c2c044/sysprep-failling-after-reboot-into-oobe

  Also change to vmxnet3 NIC and install vmware tools and try cloning.

  "

  ) More than 8 k

  (b) set incorrect permissions

  (c) corrupted somehow

  For me, the problem was intermittent (same registry key would sometimes cause the issue and sometimes not - must be corrupted sometimes) so it was impossible to tell what program it was.  Fortunately, there is a newspaper, you can watch that will tell you exactly what registry key is slightest mistake out.  Here are the steps to get the newspaper, you must see:

  When you see the error message, follow these steps:

  1.) press SHIFT + F10 to get to a command prompt

  2.) stand C:\windows\Panther

  3.) find the Setup.etl file and find a way to copy this file out of the system (I copied it to the partition D:\ and Ghost used to collect this partition and down the file)

  4.) copy the file to another computer that has Windows 7 setup.etl corrupt system.  Place it at the root of C:\ for easier access.

  5.) open a prompt on the Windows 7 computer.

  6.) navigate to the root of C:\ (or anywhere where you saved the file)

  7.) type "tracerpt setup.etl o logfile.csv.

  8.) close command prompt and open logfile.csv in your text editor of choice.

  9.), look in the log file (near the end, probably) for messages that say "Failed to key"reg"process or one of its descendants" to me, the exact eror looked like this: "failed to process the"reg"key or one of its descendants: [profile \REGISTRY\MACHINE\SOFTWARE\ESET\ESET Security\CurrentVersion\Plugins\01000200\Profiles\@My] ' If you search for"«key reg"' or «failed in the process»»» You should find the failure.

  10.) remove this software from your image, or how to get the registry key that does not work properly.

  After that, you should be able to correctly identify any key problem and the elimination/workaround on your image.

  "

• Problem with the connection works only not with the caterers

  I have a weird problem with logging, and perhaps someone here can point me in the right direction to watch. I have install a FileHandler customized for different newspapers. He worked for a few years. Now it no longer works. Nothing is found in the log file even if it is created.
  
  I have narrowed it down to there's a change in the JVM. If I run application under JDK 1.6.0_05 (what I had in production), it works. If I run the current JDK 1.6.0_22 application, it does not. This is on Solaris 10 and the only change I make is to change the symbolic link 'later' in ' / usr/jdk "to a JDK version or the other. It is reproducible 100% of the time. Use the old JDK and it works, use the JDK again and it's not.
  
  I'm at a loss as to what could be wrong.
  
  Here is the code which implements the Manager and associate it with the newspaper:
  
  Recorder L = Logger.getLogger (loggerName);
  If (null! = level) {}
  l.setLevel (level);
  }
  System.out.println ("logger level is" + l.getLevel ());
  If (null! = useParentHandlers) {}
  l.setUseParentHandlers (useParentHandlers);
  }
  String loggerPattern = logDir + reason;
  Manager: new = FileHandler (loggerPattern, limit, count, append);
  h.setLevel (Level.ALL);
  Formatter F = new UniformLogFormatter();
  h.setFormatter (f);
  l.addHandler (h);
  Logger.info ("FileHandler added [" + loggerPattern + ",]" + limit + "," + count + "," + add + "] for logger:" + loggerName);
  l.info ("open log file");
  
  I see the 'open log file' but never to see any other message of the breast journal. The "server.log" sees the messages, however.
  
  Any help will be greatly appreciated.
  
  Brett

  At one point, the internals of the LogManager/writer classes have been modified so that they maintain WeakReferences for child loggers. My guess is that your code is not keep a hard reference to the logger which you set up and it becomes garbage collector more later in time (and so do not have all future messages).

• I have a problem with the VPN work is not on the computer.

  Hello, I have a VPN from windows running between two computers running Windows 7.  Recently it has stopped working, I can always correctly connect to the VPN and ping ip VPN but my mapped drives now say

  "An error occurred when connecting Z: to."
  \\blahblah\blah
  Microsoft Windows network: The network path was not found.

  This connection has not been restored. "

  There is no firewall or antivirus running, and I even resorted to a point of restoration a few days ago, when the network was working.

  Original title: VPN doesn't work anymore

  Hi Justin,

   

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

  Your question would be more out there.

   

  Check out the link-

   

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Back to us for any issues related to Windows in the future. We will be happy to help you.

   

  Thank you.

• I have a problem with the apps work is not on the computer.

  original title: apps stopped working

  All my apps stopped working - they do not launch when I click on the icon. This includes all Windows 8 native applications as well as third-party applications. The only 'apps' embarking on the splash screen are desktop applications that run in Windows normally. I can't go to the store, I can not open the calendar, email or anything else in Windows 8. I can always on the desktop, which is how I use my computer, most of the time anyway, but it's frustrating not being able to use applications. What is the solution?

  The way I solved the problem for me is that I downloaded the Windows 8.1 in ISO format update - http://windows.microsoft.com/en-us/windows-8/preview-iso

  This allows you to install it without going through the store, which was also does not work for me.
  -Nate

• I have a problem with the printer works is not on Windows 8.

  Original title: device

  my printer has stop working.  Convenience store tells me that the coils do not work.  How can I solve them?

  I suggest you to uninstall the printer and install the latest printer driver for the printer model you are using.

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Press Windows key + R
     Type: services.msc
     Press enter on your keyboard

  3. Right click on the print spooler service, and then click Properties.

  4. On the general tab, next to startup type, make sure that automatic is selected.

  5. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• Problem with the tiles work is not on the computer.

  My tiles does not work since I got the new 8.1 (or was) new updated

  Its been irritates me for some time now, I can open Viewer, image and music in tiling, but other applications as soon as I click on them
  Simply close it.
  Thank you!

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Solve problems with a soft

  Difficulty App Store in Windows 8.1
  http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

• I have a problem with the closing work is not on the computer.

  Original title: Shutdown does not work completely

  I notice that my laptop was not actually shut down properly and my slow laptop. For me, I always leave my laptop sleep after that I go to bed or put me to sleep... and I realize that my laptop is slow... So I'll check what's happening... and I think my top time is 8 days so this means that my laptop was running 8 days non-stop... so I stop my laptop and check again and what happen it didn't reset high time and my laptop was totally slow... so I try to restart and the time taken has been reset. and my computer laptop back to normal, it runs smooth...

  The point is that we don't know what the judgment in fact do not? Shut down your laptop computer or PC will reset all default function, which means that all of your running application will be nearby. In this case the stop not reset all my app running at default.

  You can check by yourself:
  Select TASK MANAGER > PERFORMANCE and find the TIME 'UP', it appears like this "0:00:00:0" and the equivalent of days: hours: Minutes: second

  Hello

  It's because of the economy of functionality in Windows 8. By default, the computer is made to start or stop faster, which is not supported by most motherboards. Follow these steps and the PC starts normally.

  Windows 8 is a new feature called quick start. It can sometimes cause problems as you mentioned as well as others. The best way to know if the problem is to disable and see what happens.

  This feature works only when you make a STOP and then start. It does not affect a RESTART.

  To turn it off, follow these steps:

  1. press Windows key + X, go to the control panel > Power Options and select choose what the power buttons on the left.

  2. Select change settings that are currently unavailable, near the top center of the screen.

  3. lower in the window, uncheck the quick start.

  Hope this helps, keep us updated on the status of the issue.

• The mouse pointer is not displayed in Windows 8.

  original title: 8 the mouse pointer disappears NOT associated with the applications screen

  Windows 8 64-bit running on TORDRE of Lenovo tablet 3347CTO with external monitors.

  Sometimes, the mouse pointer disappears from the office.  He is always there, because I can find it by pressing CTRL (I have "use CTRL to locate mice" clicked to fix somewhere).  It will activate a program if the invisible pointer is on the icon for this program.  It reappears when you move, but only when moving.  I'm going behind the screen applications (starting) to do this. As I know it has nothing to do with any specific program.  Only way to recover is to restart the computer.  It's extremely annoying, any suggestions would be most appreciated.

  I fell right on the problem.

  Use the Windows key + P to pass between the double screen and return to the single screen mode and returns the pointer.

  Play with the mouse settings did not help.  I think it's a problem of display driver.

  Hope this helps others.

• How to do a system restore with windows 8. my mouse is not working but the keyboard works

  How to do a system restore with windows 8. my mouse does not work but the keyboard works.

  I've updated some drivers and now my mouse does not work

  Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.

  You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.

  Jim

• I have a Logitech M315 keyboard and bought a new mouse Logitech M325 compatible. I cannot now typing on the keyboard, but I can scroll with the mouse.

  I have a Logitech M315 keyboard and bought a new mouse Logitech M325 compatible. I cannot now typing on the keyboard, but I can scroll with the mouse.

  Hello

  The M325 Nano-receiver allows you to connect up to 6 devices however you
  need a Logitech utility (free download) to achieve this. Check with Logitech
  Their online documentation, support and drivers, utilities and ask in their forums.

  I don't know if that keyboard and mouse are compatible.

  Software Logitech Unifying M325
  http://support.Logitech.com/product/wireless-mouse-M325#download

  Logitech
  http://www.Logitech.com/en-us/home

  Logitech - Support
  http://www.Logitech.com/en-us/support

  Logitech - Forums
  http://forums.Logitech.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Does anyone know why illustrator did several objects when I click and drag? No key keyboard shortcuts; only with the mouse.

  When I make a square for example, click and drag with the mouse, it makes duplicate objects until I release the mouse click. How can I disable this feature? Thank you.

  Danopoly,

  How can I disable this feature?

  By unstucking the Tilde (~) key.