System supports boot time and load programs.

Original title: Explorer 7

I recently installed explore 7 6.  everything seems to work ok, but it takes a lot of time for my system to boot and load programs.  Any suggestions?

Hi larryleto,

Method 1:

You can try running the fixit tool that will correct the problem of system performance.

Run thefix tool from the link provided below:

Difficulty of Windows system performance slow computer problems

It will be useful. Please let us know to get help.

Method 2: Safe Mode

Step 1:

Try to start your system inSafe Mode and check if the problem persists.

In Windows XP safe mode

Step 2:

If the problem does not persist in Mode without failure, you can tryclean boot.

To run starting in minimal mode follow the steps in the article below:

Perform the clean boot in Windows XP

Note: After completing the clean boot troubleshooting steps return the computer to normal startup by selecting the normal startup option.

It will be useful. Please let us know to get help.

Thank you, and in what concerns:
Naman R - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Long boot time and the gel boot drive selection window

    Hello. I have a problem with my MacBook Pro 13 retina "(2015 at the beginning).

    My mac is about 4 minutes of cranking up about a quarter of the time and it is not related to the problem of the "boot disk select parameters. The computer just hangs before it's anything related to the start-up procedure. It's just a black screen with no interaction with the mouse, no noise and no keyboard input. It does not recognize the 'option key ' (used to get into the disk boot selector) until I pressed it for several minutes, and then the boot drive selector freezes as well.

    I don't have any external drives connected, and already tried SMC reset, reset the PRAM and reinstalling the operating system (normal wipe and wipe any partition).

    I always have Apple Care left. Help, please. Thank you.

    Hi Herojeff02:

    It seems that you have some SSD problems.

    Have you tried to boot safe mode. Try safe mode if your Mac does not commissioning - Apple Support

    You can start in recovery mode by pressing command + R and then using disk utility to check your SSD.

    See the following links: OS X: on OS X Recovery - Apple Support

    Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support

    If you have Apple Care, I'd do an appointment at the Genius Bar. It could also be a hardware problem.

  • Can I download a background on the system in real time and run it?

    Hi, I would like to take advantage of some tools in the system in real time.

    I thought that I could download it by file transfer,

    and then did something like this in the system in real time.

    Probably it is not...

    However, there is other ways to achieve my thought in the system in real time?

    Do you mean the exe was built for windows, so that it is not allowed to run in time real system?


    I have to communicate between CompactRIO and servers through an ethernet cable...

    so... you write a program runs on the cRIO and bring it to your servers over TCP.

  • System Restore, search option and remove programs do not work.

    I can't restore my system as the system restore option does not work. I also cannot use the search option and cannot remove 2 of my programs from the control panel. I need help as soon as POSSIBLE. Answer please! Thank you!

    Hi sudarshkaur,

    1. what happens when you try to uninstall the program?

    2. what happens when you try to restore the system? You receive an error message?

    3. What is the issue you have with search options?

    4. did you of recent changes on the computer?

    See the Microsoft articles below and check if it helps.

    How to manually remove programs from the add tool / remove programs

    How to change or remove a program in Windows XP


    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Message by saying,"Network Inspection System has stopped working and the program was closed. »

    I backed up my pc, I've defragmented, I tried to create a restore point that was earlier with no luck. I love my Inspiron, but I am concerned about the speed and the freeze ups. This problem has stopped my Internet pages. Grrrr, DR PC?


    I suggest you to follow these steps and check if that helps:

    Method 1:
    Try to run the scan for viruses online on the computer and check if it helps:

    Method 2:
    Try to perform the clean boot and check if it helps:

    NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

    It will be useful.

  • I accidentally put my system as boot partition and my windows partition not marked as boot! Windows will not start! ):


    The other day, I have been stupid, play with my windows partitions, I tried to dual-boot android 4.0 with windows, of course, as a study (this version of android has been mainly Linux). A test installation somehow fault, I put my Starter instead of windows system partition! Now windows will not start, it stays on a black screen with a sign less this sort of thing flashes in the corner.
    So I jumped in my disk windows ultimate 7, and it saysBOOTMGR IS MISSING Ctrl + Alt + Del to restart"" and if I try to install Ubuntu via live disc or USB does not start or the other, it displays the same thing.
    Can you please help me solve this problem!
    Nice day!

    After having the BIOS change, restart you your computer with the repair disc in the drive?  If so, what happened?

  • I have talked to Support 3 times and still can not get the iTunes email change on my Iphone 5. My new E-mail workks fine in line, but when, for example, I try to update my applications, I am presented with the old email again. Help, please!

    Suppost Apple and I tried a lot of different things. I can use my new email and password to connect to Itunes, but when I try to do something like, sign in to my App Store to upgrade my Apps (35 updates and counting!) I'm always presented with my old email address, and I have more access to this mail. Spend a WEEK trying to resolve this is ridiculous! Can someone please finally help me?

    Thank you!!


    What have you done so far? Updated the primary e-mail address on your existing account, you did not create a new account? All content is linked to the account that has downloaded, if you created a new account, all of your existing applications will remain tied to your old account and only this account can download updates for them.

    If you updated your account then you have: what to do when you have changed your Apple ID email address or password - Apple support ?

  • Accounts domain after installation user and loading programs

    Hi all

    I hope it makes sense that I have never had a solid understanding of the creation of user accounts especially those that are added to a domain. I have to install windows 8.1 on my laptop and I need to have a person of my work add a user to our domain. What I am curious about i, s, what happens if I installed windows 8 and all the programs I use until the user has been added to the field. This user will have access to all the programs that have been installed or would potentially be that I have to perform a hack or re - install programs on this account? Any help would be appreciated.

    Yes, you should, but if your company is using Group Policy with a pre-approved list of apps, you may not be able to launch your applications, unless you log on to the local account.

  • Windows XP computer - my wife is no longer will start and load one of its programs.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone! My

    Ideas: Computer my wife is no longer boot up and load one of its programs.  When you turn it on, Windows XP loading blinks and then you get an error message that says: "you cannot use MSN to connect. Please choose another dial to open a windows session.  With this message, all you have is a 'OK' that affects when you click it, gives you your photo screen saver and nothing else, so you have no where to go.  A few days earlier, she had an alert to update update to windows 8, but she refused and it seems that since then, she has been the problem.  Can anyone help?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Refusing to install IE8 would cause problems, Indy. Try to post here for assistance instead:

    Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Satellite L500-19 X starts and loads Win 7 always like the first time

    OK, so I bought a toshiba satellite L500 - 19 X to the United Kingdom in a store called carphone warehouse.
    It came with windows 7 pre-installed.
    I wanted the 32-bit version, so he ran faster, but he had installed 64, but came with a 32-bit restore disc.

    So I went ahead and restored, now, whenever my laptop starts up, it think it's the first time and load the toshiba implemented and stats to do things then restarts.
    He could do this all day until I hit escape and complete the configuration manually.

    No one knows how to stop this or I have to buy a full version of windows 7 and start again in this way?

    Please please answer now! Thanks in advance guys :)

    Thanks for this info!


    My computer has suddenly decided to stop loading programs.  As it happened, my mouse in the right hand by clicking the ability disappeared.  The toolbar at the top of the screen works differently and will not help load, the dropdown under FILE no longer exists, the drop-down list under TOOLS decreased by only 2 items, (POP UP BLOCKER AND SMART SCREEN FILTER) and INTERNET OPTIONS no longer appears.  The internet is a mess, especially with whatever it is when dealing with photos.  I used to be able to click on many photos and expand in doing so.  No longer.  I used to be able to right click on a photo that has produced a menu drop down includes SAVE AS but no more.  If I can get a web page to the top at all, it cannot be browsed.  Although the web page shows "life" nothing cannot be engaged on the screen by clicking on its characteristics.  Earlier this week, I could load games like SOLITAIRE, but even the game features were incomplete.  That game normally has some features TIP link in the upper left of the page of the game but who went and now it will not load even upward.  One of the last messages that I had was the one who said, "AN ERROR IS PREVENTING the STARTING PHOTO GALLERY VIEWER WINOWS."  A message that I had before I told him, ' COULD NOT CREATE THE SCHEDULED TASK for THE FOLLOWING REASON: THE REQUEST IS NOT supported 0 X 80070032.»  I recently tried to load OPEN OFFICE.ORG and it could not load the displayed computer ERROR 1935.  He also says, "HRESULT 0 X 80070091".  I don't think that I will be able to access the Microsoft Forum for any answers that might come my way so I would be VERY VERY happy if someone could answer my e-mail address that, for now, still works: * e-mail address is removed from the privacy *.  Thank you for taking the time.  Best regards, CharlieChanFan

    Hi CharlieChanFan,
    1. from when are you facing this problem?
    2. any recent change in software/hardware on your computer?
    3. What is the full error message about solitaire game?
    Scenario 1: Operating system won't load does not have the following features.
    a. toolbar running differently (do not load file menu, the Help window, tools)
    b. games such as Solitaire features do not appear
    To resolve this issue I suggest you to follow these methods provided below.
    Method 1:
    Try the SFC scan on the computer.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    See also:
    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    Method 2: Try to solve this problem with boot.
    See the following Microsoft KB article:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
    Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
    Scenario 2: Troubleshooting problem of Internet explorer.
    Step 1: I suggest to perform an optimization of Internet Explorer on your computer and find the number.
    How to optimize Internet Explorer

    Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
    Step 2: Visit it below mentioned link and follow the instructions to solve the problem of Internet Explorer:
    Scenario 3: To solve the problem of the Windows Photo Gallery, I suggest you follow the steps in
    Scenario 1.
    Scenario 4: Error code 80070091 means "the directory is not empty.
    I suggest to run the application as administrator and check for the issue.
    a. right-click right the program and select Properties
    b. on the Compatibility tab, select run this program as an administrator
    c. click on apply and OK
    Note: If none of these methods provided and steps resolve the issue, then I suggest to create a new user account, try to fix the damaged user account and control the issuance.
    For this you need to follow the link below.
    Create a user account
    Follow the link provided below to fix the damaged user profile.
    If the problem persists then I recommend you to run online Virus Scan to remove any infections, as appropriate.
    Follow the link below to start the free online scan:

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Dual boot, how to transfer programs and files from one XP installation to another?

    Due type virus problems and the inability to get things working properly after I finally removed them, I tried to repair windows xp by using the disc that came with the computer (Systemax). Apparently, I managed to rInstaller windows xp pro with the new version under windows.0 and the old version under windows. The new windows.0 boots and is beautifully, and I can find with my old programs and data files. Unfortunately, none of the old programs seem to be accessible. I can reinstall most of them, but what a chore. I can not even the old windows at startup (it literally takes over half an hour) and many programs take a long time to come, if they. Virtually unusable.

    What can I do to have access to the previous programs using the new installation of windows xp pro, so I can simply remove the old windows entirely or at least not do it as an option whenever I start.

    Thank you

    (better known under the name of Brian) buzzstar

    * original title - two Windows xp pro on drive, no partition, but one that doesn't work not correctly must the programs, and the 'good' version besoin.*


    It seems that you have made a parallel installation on the system (installed a new operating system on the same partition), we recommend only if a person has to back up files/data that is present on the system.

    You cannot transfer programs in this way and we do not recommend you to have two operating systems on the same partition. I suggest you to save files which and records that are important and then do a format clean installation of Windows XP on the system.

    Unfortunately, you need to install the programs on the system in order to to use.

    I suggest you to check the article mentioned below.

    How to install or upgrade to Windows XP

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Backup system takes a long time to load

    Original title: SAVE time?


    Thanks to those who responded. I formatted the hard drive and reloaded the software.


    1. are you create a backup or restore?
    2. you are using a third-party backup tool?
    3. using Windows backup tool?

    Method 1.
    Try to restore the backup of the clean boot state and check may be a third party application is at the origin of the conflict.
    See the article below for instructions on how to start your computer in a clean boot state.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
    Method 2.
    You can disable the anti-virus software and check if that causes this behavior.
    Temporarily disable the security software installed on the computer and check if the problem persists.

    Disable the anti-virus software
    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows 7 is very slow to load and run programs

    When I load Windows 7 it takes 3-5 minutes until the desktop. It then takes another 2 1/2-4 minutes for the icons to load and other programs to be active. Also, when you access my IP (AOL) it takes more than three minutes to load the program and to establish a connection (via ADSL). Never, it took a long time with XP or Vista. Is - this common with Windows 7?

    If you start in Mode safe mode it loads a lot faster?

    Vista advanced boot options

    If it loads a lot faster then see if you can further isolate the problem through these articles.

    310560 How to troubleshoot by using the Msconfig utility in Windows XP

    How to troubleshoot a problem by performing a clean boot in Windows Vista

    Discover control Panel\All Control Panel Items\Performance information and Tools\Advanced tools, see if it mentions nothing under "performance issues".  Look around the rest of the subjects while you're there, there are a lot of 'goodies' in there.

    Have you checked your machine for malware?

    I see a lot of recommendations here for programs such as -

    Malwarebytes' Anti-Malware


  • (UPDATED) Workstation and VMPlayer 12.1.0 build-3272444 extended vesa DEPRECATED behavior at boot time configuration (hardware related 12?)

    It was a BIG PROBLEM for me for a few hours, so it might be for others. Maybe this post will try to help other users with the same problem and give advice to the developers to change this - in my opinion - absolutely behavior deprecable.

    As in the topic, the problem is exactly that,

    Advanced considerations.

    I like use resolutions vesa extended with all my guests properly and quickly set up my screen resolution of comments at boot time machines.

    With the Linux hosts I use Grub configuration for the glxmode Installer file to my chosen resolution (usually, I want my guests to start at 1440 x 900) and I use grub glxpayload option to prevent it from console for the graphical user interface.

    Everything worked as expected until I upgraded my virtual equipment invited to the last version (12) and I've upgraded to the latest VMware Tools comments (version 10.0.5 - 3228253).

    To cut it short, after this two tasks (upgrades and new VMware Tools upgrade of hardware), ALL my guests keep in order to ignore the resolution glxmode of Grub and they started in VGA mode, keep for the entire boot and me ending with a graphical machine set up in VGA resolution :-( Really disappointing. GRUB prompt showed me - using the command vbeinfo - bios extended vesa modes were not supported.

    I use xorg.conf.d correctly the program installation of the X resolution (in the case of Linux guests), or have drag - and drop to resize screen when the OS and VMware Tools have been correctly loaded after startup was not complited, so I didn't yet still VGA (or all modes Vesa Bios "not extensive") at the start in console mode.

    What I did to solve the problem.

    I then studied the question and find the culprit. ALL my configuration machines (VMX files) virtual hosts have changed something (Virtual Hardware 12? New VMware Tools?) thereby three strings completely NOT WANTED AND NOT REQUIRED by me:

    vmotion.checkpointFBSize = "4194304".

    vmotion.checkpointSVGAPrimarySize = "33554432.

    svga.guestBackedPrimaryAware = 'TRUE '.

    I have not idea that are properly those lines, then I finally found - and it was a relief - that simply evolution:

    svga.guestBackedPrimaryAware = 'TRUE '.


    svga.guestBackedPrimaryAware = "FALSE".

    solved the problem and my guests again as before respected the glxmode configured in the Grub configuration file and were able to start any non-standard Vesa Bios mode. This was also, of course, confirmed by the command vbeinfo at the Grub prompt.

    Now I ask: why Developer (or are considering it was not me?) change the behavior of such a delicate setting without explanation?

    In my humble OPINION, if it is intended, VMware developers should go back to the old behavior where svga.guestBackedPrimaryAware (existed before? I don't have reallyknow) it is FALSE by default!

    If it's a bug, please fix it :-(((

    UPDATE: it's even worse than the supposed Iwas was :-(((sur certaines machines, je n'a pas encore découvrir sur quelle base, c'est encore pire!)) After the end of the parameter

    svga.guestBackedPrimaryAware = "FALSE".

    It is automatically (!) is:

    svga.guestBackedPrimaryAware = "TRUE" :-(((

    Now the problem is: how to block this change? Yes, I can always change read-only VMX file, then I guess there is another parameter controlling the guest VM configuration the automatic changes! If you have an idea...

    Message modificato da jtayeye spelling check :-)

    Sorry, I think that the specific configuration option changed in recent versions.

    Try to set the following configuration option:

    svga.minVRAMSize = 8388608

    That should guarantee a minimum of 8 MB of VIDEO memory for patterns VESA you are trying to define.

Maybe you are looking for

  • Tecra Z50-A-12 X is not properly connected to the Port Replicator III

    Hello I just bought a TECRA Z50-A-12 X with HI-speed III 120 replicator Port Replicator. It works but the computer is not stable and I fear that this will eventually damage the port see me problems when using. Indeed, the PC sits well in the Replicat

  • Satellite P300 - 13 M start not at all

    Hello everyone, My Satellite P300 - 13 M with the number of product PSPC4E start not at all! When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter t

  • analog input quantified

    Hello The data entry in LabVIEW by my USB-1208LS is accurate, but the analog input voltage values are quantified (there are only a few repeating values: 0,691 0.696 0,701 0.696 0,701 0,691 0,691 0,691, etc..). I am able the tensions of four photocell

  • HP T610: task adjournment customer t610 slight message are not displayed in mode kiosk WES7

    Hello I set up the sequence of model consisting of a single task deferral and a reboot. But on a thin client (kiosk mode) the adjournment of task message will not appear. Thanks if anyone can help...

  • NAO estou access entrar no faceboock

    This page da nao esta available web Google Chrome O nao pode carregar a page thanks muito porque para stakeholders. Site esta em well or sua conexao com an Internet nao esta running. Veja some contact us: Recarregue this page da web