system waiting for windows error reporting

Similar Questions

• When I click on dump debugging, system, thumbnails and files dump files memory system archive of windows error reporting

  When I click on dump debugging, system, thumbnails and files dump files memory system archive of windows error reporting
  They does not clear my cleaning disc on my computer at home. If someone could help
  deal with this problem?

  * original title - disc clean up problem *.

  You are welcome.

• How to remove the archived windows error reporting system / pending, check boxes does not remove

  When performing a cleaning disc and by checking the boxes to remove, do not delete atchived system and queued windows error reporting. How can this be repaired?

  Hello

  1. you are using a third party software to clean your computer?

  It could be caused by a registry cleaning program that has been authorized to remove or delete the part of these located registry entries to the:
   
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches

  Step 1:

   
  I suggest you to use the Windows Defragmenter software rather than a third party to fix.
   
  Improve performance by defragmenting your hard drive
  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  Step 2:

  Please make sure that you run the tool, Disk Cleanup with administrator rights.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

• Problem connecting to Windows Error Reporting Service

  Some reports may not be uploaded to the "Windows Error Reporting Service". Please try again later.

  How much later?

  Hi Bob,

  Welcome to the Microsoft community.

  According to the application, you experience problems connecting to the Windows Error Reporting Service.

  To help solve your problem better, could you give us the following information?

  1. Since when are you facing this problem?
  2. Do you receive an error message when you connect to the Windows Error Reporting Service?

  Method 1: check if Windows Error Reporting Service is started or not.

  1. click on start

  2. in the start search box, type Services

  3. click right on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Windows Error Reporting Service started Automatic\Manual.

  Also check the dependency services that are required for Windows Error Reporting Service to run.

  To verify that double-click the service, and click the Dependencies tab.

  Method 2: I suggest you run the checker system (SFC) analysis files and check if it helps.

  See the Microsoft support Article to start the scanning of the SFC.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Method 3: use the cleanup utility disk and check if it helps.

  See the Microsoft Help Article on how to perform a disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  For any future reference.

  https://TechNet.Microsoft.com/en-us/library/bb490841.aspx

  Try these steps and let us know the results for assistance.

  Thank you

• Vista - system queued windows error reporting problem

  My Vista disk cleanup utility reports that I can save 258GB by removing "system queued windows error reporting." Well well... my HD is only 145GB so somethiing is bad.

  I read a url that has a fix: http://www.oamate.com/is-it-safe-to-delete-system-queued-windows-error-reporting.html

  Is this a correct solution? Looks like it's a bug of Microsoft for you, but I can't find anything about this on the Microsoft.com site. In this forum, there is a thread that says it's OK to dele it, but I don't want to lose all my data!

  Thank you

  Its ok to delete the data in queue for the error report windows.

  In the event of a hardware or software problem on your computer, Windows collects information that describes the problem, called a problem report. Report details can include, for example, the name of a program that has stopped working, the date and time that a problem occurred, or the version of the program, which has encountered the problem.

  Sending a problem report allows Windows to notify you if a solution is available. If a solution is not available, you can ask to provide additional details about the problem in order to create a. Additional details can include files or parts of files that help to identify the problem and explain how it has affected your computer. Windows does not intentionally collect personal information, and you can view additional details in a problem report before sending it to Microsoft.

  If you want to disable this feature, follow the steps mentioned in the link below

  http://www.howtogeek.com/HOWTO/7863/disable-error-reporting-in-XP-Vista-and-Windows-7/

  hope this helps

• Disk Cleanup for Vista reports 12.6 GB for "per user queued windows error reporting"

  original title: clen-up disk

  My Cleanup utility disk Vista reports 12.6 GB for "per user queued windows error reporting". Is it safe to delete this item? Is that why my laptop is slow today and still freezes?

  Yes, but isn't concert read this this type of error: http://www.vistax64.com/tutorials/175654-disk-cleanup-windows-error-reporting-bug-fix.html

• then jeutiliser disk can clean up to remove per user archived windows error reporting

  can I use Disk Cleanup to remove user archived Windows, error report I 102 mb here can I remove it sefely

  Thank you

  Hello

  In the event of a hardware or software problem on your computer, Windows collects information that describes the problem, called a problem report. Report details can include, for example, the name of a program that has stopped working, the date and time that a problem occurred, or the version of the program, which has encountered the problem. I suggest you to check the below link.

  http://TechNet.Microsoft.com/en-us/library/cc709644 (WS.10) .aspx

  Yes, you can clean your system and remove the unwanted files using Disk Cleanup utility. Click on the link below.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• Windows Error Reporting service stopped recording of events in the event log, and now when it spawns werfault.exe, the process consumes the CPU until he is killed.

  Windows error reporting service ceased to record events in the event viewer. The last successful entry was 26/03/2010. Since then whenever the service generates Werfault.exe to handle the error, the process seems stuck in a loop of consumer processor, but do nothing. It uses 99% of CPU (80% preferred), is not e/s and number of handles, thread, & working set do not develop.

  Three Windows updates were installed in shortly after the last successful log entry (automatic update is enabled):

  KB915597 def 1.79.702.0 & def 1.79.495.0 both for Windows Defender

  KB980182 for IE 7

  I think that my system is clean, at least Spyware Doctor think it is. I also did some tests Ad-Aware. Windows Defender analyzes every day without error.

  Has anyone else encountered this problem?

  Hi Wannknow,

  It's good information - and thanks for the thanks! You really only need to run an adware or virus (malware) program at the same time. What I would recommend is that you choose an adware program - either "Windows Defender" or "spyware doctor" and disable the other. This can be your root problem, so at this point I turn back on 'report of problems and solutions' and see if you experience the same problem:

  Again, here are the instructions:

  1. open Control Panel. (Press Ctrl-ESC and type 'control' is faster access method).

  2. click on "System and Maintenance" and then click "problem reports and solution."

  3. click on change settings in the left panel of the problem reports and Solutions window.

  4. Select Advanced settings.  In the "for my programs, problem report is: ' select 'off '. Click on CLOSE the

  Hope this helps,

  Steve <> Microsoft partner

• Windows Error Reporting service connection failed

  For some unknown reason to me, the Windows Error Reporting service has decided that it cannot send crash reports to Microsoft.

  

  I get the above error when I try to "Find a solution" review problem reports dialog. 'Try again later' does not work. I've tried several "recommended fixes' including digitization of system files corrupted, by ensuring that the WER service is running, and check firewall issues. Reports of incidents used to work, so I'm at a loss as to why this is happening. Can someone shed light on the possible cause?

  Hi BaradaNikto,

  Thanks for the reply.

  Before you repair your operating system, you can purge all existing reports by using the disk cleanup utility, and then see if you get the error.

  For the instructions, you can consult this article. Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  If this is not enough, please answer with the information asked Gerry C J Cornell , which will help us to solve the problem.

• Problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  Hello

  When I present reports of error and asks me to send additional information, I get the above error. I have read and tried all the solutions already asked for this problem except for the removal of error reports (because if I do that, how could they be downloaded for analysis?)

  Just to confirm, I have:
  Restarted with a clean Windows with only Microsoft services running and no boot entry and retried the upload.
  A ran the SFC system without any problems.
  Insured to the logs and alerts are allowed through the firewall and temporarily disabled my virus scanner traffic analysis

  The persistent questions seem to be Google Reader goes down, and several accidents related to my AMD video driver.

  Hope you can help.

  Hi Kyle,.

  Did you do any change in software of hardware on the computer before this problem?

  You can read the following steps and check if it works.

  Method 1:

  Check if error reporting is enabled.

  For do I suggest you check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

  a. click Start> type of search in the servicesbox, press enter > find windows error reporting service in the list of the list of services > right click , and then click Start.

  (b) also to run the service as Auto, please follow the steps below.

  c. right-click on the service from the list of windows error reporting services and then click Properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

  Note:

  The purge will remove the existing report but if the problem reappears to collect the reports again and you will be able to move forward with the process of reporting errors.

  Purge all existing reports by using the disk cleanup utility, and then see if you can send information to the server of problem reports.

  Refer to this help article.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 2:

  Please refer to Google Drive Known Issues, you can also ask your question in the support of Google using Google Drive question forums.

  For the problem with the AMD video driver, you can try to update the drivers for the latest on the manufacturer 's Web site and check if that helps.

  To know better the question you can always check the event viewer details related to the issue.

  With the event in the Event Viewer logs, you can get information about your hardware, software and components of the system and monitor the events of security on a local or remote computer. Event logs can help you identify and diagnose the source of current system problems or help you predict potential system problems.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Please return to the State of the issue and also let us know in case you need assistance on issues related to Windows.

• Windows Error Reporting error re #1001 Event Viewer: MpTelemetry, MSE

  I am running Windows 7 Home premium 64-bit.  Get the Windows Error Reporting (information level) #1001-

  Log name: Application
  Source: Windows Error Reporting
  Date: 18/01/2011 10:52:08

  AM
  Event ID: 1001
  Task category: no
  Level: Information
  Keywords: Classic
  User: n/a
  Computer: Joanne-PC
  Description:
  Bucket of error, type 0
  Name of the event: MpTelemetry
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: 2152759308
  P2: unspecified
  P3: ScanFile
  P4: 2.1.6805.0
  P5: Microsoft Antimalware

  (BCF43643-A118-4432 - CHANTER-

  D861FCBCFCDE)
  P6: unspecified
  P7: unspecified
  P8:
  P9:
  P10:

  Attached files:

  These files are available here:
  C:\ProgramData\Microsoft\Windows

  \WER\ReportQueue

  \NonCritical_2152759308_1ec832eb2ce

  eb154aa61793319bc5d9cdf3883dd_035c2

  09a

  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 48ee36c7-2323-11e0-90e7

  -002622f27952
  Display state: 4
  The event XML:
  <>

  xmlns = "http://schemas.microsoft.com."

  ' / Win/2004/08/Events/Event ">
   
      Reporting">
      <>

  Qualifiers = '0' > 1001
      4
      0

  0 x 80000000000000

  s >
      01-18T16:52:08.000000000Z">

  23730

  >
      Application
      Joanne-PC
     
   
   
     
     
      0
      MpTelemetry
      Not available
      0
      2152759308
      unspecified
      ScanFile
      2.1.6805.0
      Microsoft antimalware

  (BCF43643-A118-4432 - CHANTER-

  D861FCBCFCDE)
      unspecified
      unspecified
     
     
     
     
     
     
     
     
      C:\ProgramData\Microsoft

  \Windows\WER\ReportQueue

  \NonCritical_2152759308_1ec832eb2ce

  eb154aa61793319bc5d9cdf3883dd_035c2

  09a
     
     
      0
      48ee36c7-2323-11e0-90e7 -.

  002622f27952
      4
   
  

  I get these since I installed MSE this time on Windows 7 and also on my most old laptop with Vista.  I see that it is not critical, but I don't know what the problem is.  I have not found a problem when the MSE is scanning or protect my computer.

  Is this serious and I want to do something more?  If someone can tell me how to investigate this type of info in case the Viewer, I would be happy.

  Thanks for any help.

  Joanne

  Hi Joanne,
   
  You have any anti-virus or anti-malware to third party software installed with MSE (Microsoft Security Essentials)?
   
  I wouldn't think it's serious, but a mistake is a problem regardless of its gravity.
  However, I would like to you follow these steps and check to see if they help.
  Step 1:
   
  I would like you to put your computer in a clean boot State in order to eliminate any conflict of third party software causing the problem to occur. I suspect the involvement of a third-party software.
  Note: Please follow step 7 to your computer as usual after the test.
  Step 2:
  You can also Uninstall MSE and install version 2 of MSE and check if the problem persists.
  Note: Be sure to only install the version appropriate for your operating system
   
  See also:
   
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problems with Windows Error Reporting

  I have Vista Home Prmium with SP2 on a dual processor computer heart. wermgr.exe is running in the background and when he does he can linger around for awhile while using 50% of my CPU all the time. He passes in and out the Task Manager, so that the CPU usage is constantly bounce up and down. I tried to disable the windows error reporting service, but it does not work. I read it could be a problem with 2007, but Office and this race Diagnostics would take care of the problem... but the diagnosis has not found a problem. Does anyone have an idea what I can do to fix this? Or y at - it a way to really disable the error reporting service?

  Thank you

  Here's how to disable Windows error reporting in Vista: http://www.howtogeek.com/howto/7863/disable-error-reporting-in-xp-vista-and-windows-7/; However, it is not recommended because it can be a useful tool if you are having problems.  That "s your decision to make.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• What happens when you disable the service "Windows Error Reporting Service" in order to avoid an annoying and misleading popup error message?

  I kept getting annoying "authentication failure.  Please check your user name and password of the account '... xyz. "" error every 30 seconds. "

  I tried to restore my system and antivirus running - even to reinstall my anti-virus.  I deleted the accounts in question and kept still getting the error message.  Note, receive emails has never been a problem.

  I finally disabled the element of the system of "Windows Error Reporting Service" MS configuration and now the error pop ups have disappeared.  Is it correct to keep this function disabled?

  Thank you.

  To check the event logs, go to start / Control Panel / administrative tools / event handler.

  To achieve the reliability and performance monitor, go to start / search and type in reliability, and then double-click the program icon that appears.

  I hope this helps.  You can always check these sites periodically and do not need WER to warn you of a problem (even if it is perhaps faster) - you can check manually.  WER serves a purpose and he gives notification of a problem (which is good), but not in the circumstances that you knew.  This is a "nice to have" feature - not absolutely necessary.  We can try testing again to see if we can find the problem with WER if you're at it - or you can simply leave it off and make periodic checks of manual (decision is yours).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem connecting to the Windows error reporting service

  Whenever I try to check for solutions in the Windows 7 Action Center, I get the following error message: problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  This problem began to appear a few days ago, even if I did not any changes to my computer. I do not have any firewall (with the exception of the default Windows Firewall) and all my other programs work very well on the Internet.

  Any ideas what could cause the problem?

  Problem solved.

  I actually had to purge all existing reports by using the disk cleanup utility.

• Windows Error Reporting service not connected to the internet

  Since the center of the Action, when checking for Solutions is selected, the following error message is returned;

  Problem connecting to the Windows error reporting service.  Some of the reports can not be uploaded to the Windows error reporting service.  Please try again later.

  I had the same problem with Vista and now 7 does too.  Any ideas?  (I know that I'm connected to the internet, as I am posting this...)

  Hello Mr. Merritt,

  Welcome to the Microsoft Answers Forum!

  To solve the problem better, please let us know the details mentioned below.
  (a) if it works well before?
  (b) have you done with the latest changes on the computer?
  (c) is your computer connected to any domain?

  I suggest you to check if error reporting service Windows has stopped working. Try to start the service by following the steps below:

  Click Start > type of search in the services box, press enter > find windows error reporting service in the list of the list of services > right click and then click Start.

  Also run the service as automatic, please follow the steps below.

  Right-click on the service from the list of windows error reporting services and then click on properties > there will be a pop-up screen > check for startup type and select Automatic under drop down menu and apply the settings.

  Also I suggest you to temporarily disable the security software and settings of the firewall and check if it helps you to solve the problem.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Answers Support Engineer                                                              
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads