SYSTEM WILL NOT RESPOND FOR 1 MIN AFTER THE CONNECTION
Once connected to my system after a reboot it will not respond for atlesat 1 minute. I can open some software like firefox... but I can't open Control Panel or modify a system
Hi mohdrafi,.
(a) since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?
This problem may occur because of the conflict between the hardware or programs on the computer.
To refine the question, I suggest you try the following steps:
Disconnect all external devices, mainly USB devices except for devices such as the mouse and keyboard.
Check if the problem persists,
Step 1: Disable security software, follow the steps mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Note: Activate security software once the test is completed.
Step 2: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below.
Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
If everything works properly in safe mode, you can deduce that some third-party services are at the origin of the problem.
Step 3: Put the computer to boot to figure out program causing problem.
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software
Important: n ' forget not the computer to start normal follow step 7 in the link.
For more information, see the link below:
What to do if Windows does not start successfully
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
This might interest you:
5 ways to speed up your PC
http://www.Microsoft.com/atwork/maintenance/speed.aspx
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Single-pass does not work for Web sites after the last update of firefox
Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.
Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.
You may need to exit Firefox and start it again before it takes effect.
A little luck?
-
SimplePass does not work for Web sites after the receovery system
I recently did a recovery plant system overall condition,
SimplePass works for the windows logon, but not for Web sites more... no invites her to save new sites when passwords are entered finger print OR interrogate the user on sites that are entered manually.
I also tried importing my saved identity still no website
SimplePass 2012 version: 5.3.1.7
Laptop model: DV6 - A6Y01UA
CW,
You did not include the version of your operating system: Windows 7 I guess because you have been deported back to a very early version of the HP SimplePass.
You must consider that you may have a version of your fingerprint driver that is appropriate (fairly recent) to run a newer version of HP SimplePass. The fact that the old version SimplePass does not at all suggests that you run the version of the driver 4.3.118.0 - this version of the driver is not compatible with subsequent revisions of the SimplePass software.
Reference
HP Pavilion dv6-6c15nr Entertainment Notebook
- Fingerprint drivers
If your version of the driver (for your OS) is equal to or newer than those listed here, chances are that you can keep your current licence.
If your current driver is older than the driver for your operating system,
then: download and install yet the driver of fingerprints for your operating system.
sp58834 validity sensor V 4.4.232.0 Win8
validity sensor V 4.3.205.0 Win7 sp55109
[Devices]
USB\VID_138A & PID_0018 = "validity sensors (WBF) (PID = 0018)" "
------------------------------------------------------------------------------------------------------------
- Find, open, and follow the procedure described in the file named:
- Think about it: If you try to update to the recently released Omni SimplePass program, you will NOT be able to use your webcard .tsd file to import your webcards (websites and passwords) in the new version of SimplePass. The Omni of SimplePass version is NOT compatible with previous versions of the HP SimplePass program.
==========================================================================================
Finally, you might take a look at the Web page of your computer (under the reference above)-check to other drivers or software that you can update.
-
We must CHANGE our credit card for future payments and it does not change it on the line.
This is an open forum, not Adobe support... Click below to contact Adobe staff for help
While the forums are open 24/7 you can't contact Adobe support at any time
Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
I got am HP Pavilion 17-e049wm Notebook PC product #E0J75UAR for about 4 weeks now. I bought it refurbished. A week ago I started having this problem. 3, e, d and c keys do not work when I first start the computer all of the other keys work. Nothing happens when they are pressed. Sometimes I will restart the computer and they work again, other times they won't, but often will start working if I left the computer set for about five minutes after the start.
The computer is spotlessly clean. I've only used a dozen times or more. Nothing has been spilled on the keyboard.
Sounds like software for me, but what?
I am running Windows 8.1 and no programs are running at startup, with the exception of a program start button, but the problem began weeks after installing that.
Any ideas?
FWIW, I called hp. They believed excluded material and had me do a full system restore. Problem persists... The things you own end up owning you they say... I guess it's doubly true if you own a hp laptop. Full day turned... One day closer to death. Thanks Obama.
-
I think I got this, just need confirmation, before I was going to HP.com to find udpated pilots, then site Web HP said if computers purchased after August 2013 have been tested, I think you could get the updates via the HP with WIN10 site. My pc model was purchased in February 2013, it seems now that I have WIN10 there is no drivers for me page to go it says that I need to go to the updates of Windows. Before I upgraded to 10, I was 8, and I had full access to the drivers download through HP.com page. However, I think I understand now, I had a problem with the Norton Removal Tool, after using it, it makes my pilot biometric and disabled the Windows Hello to WIN10 - the reader of fingerprints for a connection. The pilot appeared to be corrupted and I needed to just reinstall. I finally found an old forum via HP where someone has had the same problem that I did and they are found to include a link for the driver, and it worked for my model of laptop and solved the problem. After some tests, I uninstalled the driver and learned at that time, after the driver is uninstalled, I can go to Windows Update and it will search and find the driver that I uninstalled and offer me the download to reinstall. That's cool. So, I understand now that even now if the drivers are not available for my model via HP.com, I can now just do a search through Windows Update and it will fix the problem, only after that I uninstalled it through Control Panel, Device Manager, once I uninstalled, restarted the computer, then did the updates of Windows It downloaded the driver, like when I went to the Control Panel, Device Manager, I saw the biometric driver in good working condition. This is the case now with who need driver updates / reinstall? (Note: to update the drivers, I know too much, you can go to control panel, Manager of devices, and then click the driver and select Update driver software.)
Hi @MVP1 ,
Welcome to the Forums of HP Support! I have, I understand that you are concerned about Windows 10 updtaes. I'll be happy to help you.
You are right. Microsoft took the drivers for this computer. All updates will now come from Microsoft.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!Thank you.
-
Windows backup will not accept a new drive after the 2nd backup drive
Windows Vista Ultimate Edition. Windows backup will not pass make the 2nd drive. Error: insert - % 2 serial number of volume in drive %1 %3.
(0 x 80070022) . He is the 3rd disc shaped and then gives me this error. This computer broke down twice before after hibernation. Boss will switch to
Windows 7 and is upset. He leans on Mac.
Thanks, Terry
I don't have a solution to your problem of "dvd".
I have a suggestion:
Forget to take the backup of files with dvds.
Buy an external hard drive and use it for backups of files.A hard disk of 1 TB post can be had less than $100, to the Canada. The United States will be even less.
Thanks to the external hard drive for backups of files, you don't have to sit by the computer and feed it with DVD whenever he asks. You can walk away. The computer will do its thing without you.
A 2 x 4 in box will store all your files. No DVD more formatting. No more marking each dvd. No stacks more DVD.
-
Adobe Reader 11.0.09 stop responding for 30 seconds after the start
When starting 11 AR (whether via its icon or a .pdf document), AR starts normally, but after a few seconds the interface freezes and unresponsive for about 30 seconds. Connection at startup with Process Monitor gives the result below (actually two instances, only is indicated). When the second instance times out (I guess this is what happens), AR11 starts responding again.
The problem disappears if the Weblink.api plugin is deleted, with the side unhappy effect as the tool on the right pane also disapperas (replaced by a spinning icon but AR11 otherwise responsive).
AR11 installed on the server doesn't have any Internet access either. My guess is that AR11 is looking for the host above for some reason any and need some time before it becomes available for use. This is obviously a very poor design and we want to solve somehow... Ideas anyone?
/ Patrik
Workaround. By activating the locking function, we prevented Adobe for trying to muck about online. In fact NSA provides recommendations on how to lock Adobe Reader, google 'Recommendations NSA to configure Adobe Reader XI in a Windows environment'. We only use:
HKLM\Software\Policies\Adobe\
- \FeatureLockDown\cCloud bDisableADCFileStore REG_DWORD set to 1
-
Windows could not search for new updates after the troubleshooting and repair of updates
My computer Windows 8 began to refuse to install windows updates. I've been through the troubleshooting steps in Help and online.
Now, what I mean is "Windows could not search for new updates", code 80073712.
Troubleshooting Windows Update tool, solve problems as an administrator, gives:
Error Windows Update Database that can be detected 0 x 80073712... Fixed.
Windows Update components and need to be repaired... Fixed.
I'm skeptical about the 'Fixed' part, because if you run it again... he finds and it 'fixed' the same problem.
DISM.exe/online/Cleanup-image /Restorehealth and /scanhealth the two report error 14098: component store has been corrupted.
Feel free to ask me questions to debug it, I'm fairly technical...
Hello
You can try this fix based on Windows PowerShell and see if that helps:
http://www.kapilarya.com/fix-Windows-8-1-Unable-to-check-for-new-Windows-updates
Hope this helps, good luck :)
-
HP Pavilion 15-n013ca: HP Pavilion - system will not ask for a user connection
Had a virus - malware. load malwarebytes and cleared. I was able to reboot and log in. I had too many running - Kaspersky, Mcafee and Windows virus protection systems. Kaspersky has expired, then started the uninstall, frozen system. I had to do a hard reboot. I am now in a situation where when I start the laptop, the system receives the background color shows the date and time, but ask not my user name and password. I can't connect to the laptop at all.
I don't have a set of boot disks to this system. I bought with windows 7, improved a couple of years of Windows 8 and never got to create a bootable cd. What are my options? I don't know if it's the windows registry which is damaged or not.
Any help would be greatly appreciated!
Hello
As you started to uninstall Kaspersky, the system should created a restore point, if you can try to restore it as follows.
Stop of the laptop and leave it like that for 10 seconds.
Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.
On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.
Select 'Advanced Options', and then select System Restore.
Click on yourcurrent system O and then wait as the system restore window opens.
Choose the restore point created before you uninstall Kaspersky and then proceed to the system restore.
Kind regards
DP - K
-
Given that Windows installed SP1 printed the last doc is not removed and blocks therefor all subsequent print jobs. Currently I have to restart the computer to get the doc "deletion" removed printing (QC) is a solution for this?
Any fix would be with your printer software/drivers, its nothing specific to sp1
There is a tool fixit MS for various printer problems http://support.microsoft.com/fixit/
-
Envy 14 CTO will not shut, forces hard stop, after the upgrade to win 10 anniversary
After a long wait in Win 10 the Envy 14 finally began to sleep and shut down properly. As soon as the update of the anniversary has been installed, we went back to the questions of the soul. System not completely stops and freezes to force a hard reboot, after that the restart that he stop or sleep is selected manually. If the system can accommodate on its own, then it is more closed or sleep without rebooting.
Course on all drivers and troubleshooting power back shortly to all default values.
Hello
Try the following.
Open settings and select System. Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.
In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '. Click on the button Save the settings, and then close the open windows and restart the laptop.
When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.
Once the installation is complete, restart the laptop.
When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.
Kind regards
DP - K
-
We are VERY DISAPPOINTED that it is obviously not more direct support of this product, or is phone - this not correct? If so, we don't remember this change notification.
Speaking of which, without any alteration to a form of signature which includes three steps: 1) Prefil, 2) all the information and signed by the client and 3) countersign date by us and all of a sudden after working for months, he comes back and is supposed to be completed once step 2 is completed. There is no way later to fill the countersignature. I checked that the fields are still reported as such, but very recently, the third stage (without date or signature even filled) ends from step 2 is done. Something is broken and it is apparently not possible to get immediate assistance from Adobe on this.
Things change suddenly in the way that documents are processed without warning advanced e-mail, then suddenly things break and there is nobody to contact directly for assistance. It turns out that if we go back to the classic shape everything works fine because you still have the box "I have need to sign. The 'new' shape (of shit) said anything about it? NO! Instead, he proposed adding a "me" and various other areas, with absolutely no explanation of what they are and how they are supposed to work! Thank you, Adobe, make the new procedure so obvious and undocumented. NOT. I should send you a bill for all the time spent trying to figure this on my own because of the absence of any reasonable support more. You are a paper company, but you seem unable to adequately document your own products. Taking the human support was a horrible move on your part - it could have been resolved in 5-10 minutes. In any case, it is marked and done and resolved and I hope and pray I will never work on a question like that again. You're just better not take the classic option.
-
My application does not work for two days after the update
ITI has been two days now my app is not workog knowing that I paid for a membership year after that I did the update it please help
We will post updates on the installation of revel problem in the following thread:
-
My system will not save. Keeps giving me the error "backup failed."
Tells me to insert the old disk since the last backup. It does not work. Does not read the disc. Tried again with a new disk it formatted and then I clicked on backup. He's going to a certain time and then says backup failed. I tried three times. Help!
Hello
give read down at the bottom of my 1st answer for you:
If you have problems, it's in here is a forum for microsoft specifically for backup issues
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
Maybe you are looking for
-
By clicking on "View more information on this update" for 31.5.0 does nothing
I got a pop up today that Thunderbird 31.5.0 is available. I clicked on "View more information on this update" because that usually takes me to the release notes and I prefer to read about updates and download and install myself, rather than having t
-
Add to that a window of the device does not open
all the instructions say to click on 'Add a device' and 'add a device' window will open. No matter how I navigate, click on open Web site page on how to add a device NOT an extra one window unit. Here's a URL https://support.mozilla.com/en-US/kb/add-
-
Udates who of 'success' every day? The same updates?
Running Vista Home premium, automatic updates told me each day that there are updates to load. After a few days, noticed that it is always the same updates that are "successfully" updated... 62.9MBs k 2656351 & 2600217 & 2487367 & 2468871 & 2533523.
-
WRT110 will connect everything except wireless laptop XP
I have a WRT110 Rangeplus Wireless Router. It connects 3 desktops (XP and VISTA) and a printer via 4 plugged the ethernet cables. It connects (VISTA) Compaq laptop, a computer eMachines laptop (Vista), a Wii and 2 Tivos with wireless. This is the
-
I have a XP Media Center operating system on it. I rarely used. I tried to get a job with him. I get an error to contact the Publisher that in need the correct version of .net framework v1.1.4322 I have no idea what to do to make it work?