system32\DRIVERS\pci.sys missing or corrupt file error but windows xp is already preloaded on computer when purchased
missing or corrupt file error system32\DRIVERS\pci.sys keeps appearing. I had a problem with google chrome and then stop everything. This error appeared. It tells me to use the cr rom boot but xp was already loaded on the sony vaio that we bought a few years ago. I don't know what to do next because I don't want to lose the pictures and music, we have on the hard drive. Any help would be appreciated
If your data is not backed up, then at some point that the data will be lost.
Your Sony are delivered with a hidden restore partition or recovery disks, but I do not think that the Sony recovery allows to repair an installation of win, only pure install.
You must remove the drive and it slave on another PC in order to retrieve the data, or take it to a decent repair shop for them to do it for you
Tags: Windows
Similar Questions
-
Satellite Pro 4340DVD will not initialize - pci.sys missing or corrupted
I bought a Toshiba laptop Satellite Pro 4340DVD model # PS434C-3N152, Serial # Y0018185J, off E - Bay.
The original operating system, Win 98SE has been upgraded to Win XP Pro. No disc don't came with the laptop.
The laptop crashed yesterday while I was online and will not initialize to top._Error message reads: _
+ The following file is missing or corrupt: System32\DRIVERS\pci.sys.+Any suggestions on how to fix this problem would be highly appreciated. I would love to have a manual for this camera, but have not been able to find one.
Thank you!
SamGood news!
-
PCI.sys missing or corrupted Server R2 2012
After the Windows updates, you now receive an error during startup which States PCI.sys missing or corrupted. I tried to replace the file with a new copy pci.sys, ran chkdsk c:/r, and nothing seems to work.
I have the impression that the registry is to blame, but don't know where to start
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:Windows cannot start because missing or corrupt the system 32\drivers\pci.sysThen he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.Select 'R' in the first screen to start repair.one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank youalso, I can still use the old drive hard when it is installed on my laptop!HP pavilion dv5220us running windows xpI had advanced care system that had a top registry Fixer and I got ccleaner as well on the computerinternet security Norton 2011
Hello panjok2,
Sometimes recovery CD are dependent on the architecture of a hard drive. If it is different from the original disc, then we have problems.
In this case, the best thing you could do is contact HP and see if this is the case. If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.
Let us know if you have any questions.
Best regards
Matthew_Ha
-
Error System32\DRIVERs | PCI.sys
I am running XP PRO. When I try to start, I get the error that my System32. DRIVERS\pci.sys is missing or damaged. I can't start with an OEM drive or in safe mode.
I found the problem with my memory card. I reloaded XP and now IE is having a problem with the connection do not. Thanks for all your help so far.
-
Original title: file "c:\windows\system32\drivers\afw.sys" agnitum firewall driver, how to find it.
I downloaded a trial version of Bullguard internet security and while downloading stopped at one point and ask for the file above. I tried a nd produce no result. Any ideas please. Thanks, pete
C:\windows\system32\drivers\afw.sys with description Agnitum Firewall NDIS Driver is a driver file of Agnitum Ltd. belonging to Outpost Firewall product.
The file is digitally signed Agnitum Ltd. - VeriSign Time Stamping Services signatory - G2
We do not recommend remove digitally signed files from Agnitum Ltd.
Chk this link
http://www.OutpostFirewall.com/Forum/showthread.php?22526-missing-Afw-sys
Replace the file from another computer and check.
try to download it from this link
-
Original title: during repair XP Pro from the disk installation, everything crashes.
I am writing this plea on my desktop, pc Win 7 it. The pc is older and elsewhere in the House.
Due to the white/white space in Add/Remove Programs, after checking the extent of possible for viruses, corruption Reg, etc., the advice of consensus was to reinstall the Windows, using the disc (this XP Pro was on the HARD drive when I got the pc - new to 2009 - and I did the back-up recommended/controlled , and that's what I was doing Rcounter Set up, around 1700 BST.
Everything seemed to go OK, but black screen of Windows is now the small hourglass circulating and 'Please wait '. The HARD drive is flickering, but it's been more than 3 hours!
My second pc was rotten, and I had to reinstall or repair XP Home [disk] a few times. It is only 35 GB, compared to more than 100 on the pc in question - but I've never met before delay.
Installation messages were as follows:
EPPkt.sys and c:\windows\system32\drivers\afw.sys not found. I checked this point, and it should not have caused any problems. It has also sought a labeled disc 'Machine Virtual Network Services', which no doubt, since I did not, was never necessary.
I'll leave it on - but...
Help, please!
Well, I had to bow to the inevitable. Please accept this response as a ' I've been there - it could happen to you. "
I spoke to BT [they provide my broadband] and the helpful guy asked me to look at the installation and reinstall in a different place. It's OK, but [, BUT] some of the drivers have been zapped in eternity. PCI, sounds, videos. The guy thought BT that these had been modified or replaced since the beginning, whereas they were not available. The XP Prof is on the pc when I got it, but I assumed that the pilots were on the backup disk, I did. No, they were not. And how to go online to search for them if we could not put in place the ethernet connection?
So, I bought Win - 7 it 32-bit full ed. [be too afraid to try an upgrade].It could have been a response in the migration of these from other drivers, but I guess it was time to go.
As I can't afford to buy new COREL, MS Word, etc, I have installed free VMWare player as a host for my older progs in a virtual environment.
Another thing came out of this: although what remained of XP has been saved by 7 as WINDOWS.old, I am very happy that I had a HDD eternal with ntfs to preserve my files and installable 3rd party progs.
I hope this might help someone - thanks for the info.
-
Ntoskrnl;. exe that is missing or corrupt file error
I have a laptop with a ntoskrnl;. exe file that is missing or corrupted and cannot rebuild or load from cd, can I download this file somewhere, or what I can do to re - install this file and how?
Hi WEBERSCHLOTZSKY,
1. When you receive the error message?
2. did you of recent changes on the computer?
3. what happens when you try to copy the file from the Windows XP CD?
There are several reasons for this error message to occur.
This problem is often caused when the boot.ini file is missing or misconfigured. This problem often occurs when a user has recently added or removed from an operating system on the computer or added or deleted hard disk drives in the computer.
If you are unable to start Windows and the error message then consult the below Microsoft article and try the steps mentioned, check if it helps.
Error message: "Windows did not start because of a configuration of the disk of the computer problem.
-
Corrupted file error message Windows...
I get the above error message title... I ran 'chkdsk' several times and it has still not corrected this error... what needs to be done at this point? The error is:
The file or directory C:\System Volume Information\_restore {94800E57-BEBA-4742-B1DB-66A7419215AB} \RP341 is corrupt.Thanks a lot Elizabeth23 for your answer to my problem. After much trial and error to try to remedy my situation, I took my computer to my friend who has a knowing computers and he was able to quickly locate the corrupted file and remove it from my system. I appreciate your suggestions and will keep on place by chance I should run into a similar situation like this even once. :-) I'll definitely check these links about detection of malicious software programs.
-
system32\DRIVERS\pci.sys
I read the other stages of forum and tried several times to solve this problem, but does not have my 'Windows Professional CD' squat. It is, and for 'Refurbished PC' and I think now I need the original 'set up' that has been preloaded on the desktop when I bought it 20 days ago! Those refurbished are not the same. Is that correct and what should I do?
Hello
I am very happy that you are happy!
the recovery console is designed to repair the repairable items...
.reformatting: it is the deletion of all the information on a hard drive, redividing it is the preliminary step in total to reinstall if this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK -
I got creative cloud and all products works fine before I reinstalled windows.
I reinstalled windows 7 and reinstalled my creative Cloud applications, but now I can import is no longer any of my AVI files, who worked all before. As the title saysI managed to fix it, the original program that has saved the file AVI Fraps, which uses its own codec. Relocation of reinstalled Fraps codec.
-
Update causing error problem"ssing or 32\DRIVERS\pci.sys corrupt system"
Original title: update the problem cause
After updating major on XP, cannot restart. Emergency start screen goes to "missing or damaged system 32\DRIVERS\pci.sys. How can I move from this screen to allow the use of the Windows CD-ROM to allow the repair to activate? Help gratefully received.
PCI.sys error when Windows starts
Problems with damaged or Incompatible hardware with Windows XP
http://support.Microsoft.com/?kbid=330181Windows could not start because the following file is missing or corrupt:
System32\DRIVERS\pci.sys
Setupdd.sys could not be loaded. Error code 4.
-or-
Setupdd.sys could not be loaded. Error code 7.When you start Windows, you may receive an error similar to:
File is missing or corrupt: C:\Winnt\System32\Drivers\Pci.sysTo restore the file, perform an upgrade on the spot or expand the file from the Recovery Console:
1. start the Recovery Console.
2 select the installation that you want to access.
3 enter the administrator password.
4 entry card to determine the drive letter assigned to the CD-ROM.
5 type: Expand, CD-ROM drive>: \i386\pci.sy_ c:\Winnt\System32\drivers/y.
You should receive:
PCI.sys
1 file (s) expanded.
6 type exit to complete the Recovery Console.Install and use the Recovery Console in Windows XP
http://support.Microsoft.com/kb/307654The above is my notes on Windows XP - no guarantee
-
DRIVER_POWER_STATE_FAILURE
0x0000009F
Parameter 1: 00000000'00000003
Parameter 2: fffffa80'059 c 0880
Parameter 3: fffff880'02ece7f0
Parameter 4: fffffa80'080 c 7670
Caused by the driver: c:\windows\system32\drivers\sptd.sys
Caused by the address: c:\windows\system32\drivers\sptd.sys + 1dc3c
CPU: x 64
Plant address: ntoskrnl.exe + 5 has 540
Then view the last dump using BlueScreenView file
on the lower panel. I see two entries with a red nail... namely
ntosknrl.exe and c:\windows\system32\drivers\sptd.sys
This BSOD occur usually when I try to use my secondary video card... a Nvidia Geforce 610 m. I tried updating the driver, put it back, for a newer version or even an older version supplied by the manufacturer of the laptop. But the BSOD stop then re - occurring when the system restarts after a few attempts also. and I look in Device Manager and I see that my other card video (nvidia) is missing from the list. but then returns after a few stops more or less.
ASUS k55
all stock, nothing has changed...
Hello
c:\windows\system32\drivers\sptd.sys is pass it through Direct host SCSI - Daemon Tools (called BSOD issues). Please remove it as soon as POSSIBLE with the uninstall tool - http://www.duplexsecure.com/en/downloads
Kind regards
Patrick
-
Good evening
Windows no longer starts.
at startup, it tells me:Windows Boot Managerfile: \windows\system32\drivers\sptd.sysstatus: 0 x 0000001Info: windows could not load because a system critics driveris missing or corrupt.PS: my pc is an Acer aspire 7738G and vista under worksFrench
Please click on the icon of language at the bottom of this page to select your language from the list of countries / regions to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language there, the support options for additional international sites are at the link below:
http://support.Microsoft.com/common/international.aspx
Please click the language icon at the bottom of this page to select your language from the list of countries / regions pour post your question in the language of your choice. The forum you posted is fr English only. If you can't find the language here, additional support options to international destinations can be found by following the link below:
http://support.Microsoft.com/common/international.aspx
Thank you.
-
I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.
You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.
Maybe you are looking for
-
"Change setting of browser" popup, but frozen. This msg sent with IE
Browser alert change settings popup is displayed, but is frozen. If you choose keep the settings or approve the change and press 'Yes', nothing happens. You can not close the pop-up window also.
-
I want to conceive the loop or counter to measure the data...
Hello I want to design a loop or a counter to measure data. For example I want to measure the voltage and capacitance, and then I want to plot the graph for this. Thing is I firstly want to measure the voltage 0V then 1 v then again meter come to 0v
-
Windows Live Mail crashes when you try to send e-mail messages.
When I open Windows Live Mail my emails and try to send to comcast.net, the Live Mail freezes up. If I try to create a new message or reply to an email that I received, a new message then goes white opaque and Windows Live Mail stops. It just gives
-
I've been living with this problem for a few months and now wants to solve with your help. Question:Printer wireless HP OfficeJet 4630 print is no longer with my desktop Dell D531 via WLAN, however, workwith all the other WLAN connected devices, e.g.
-
error 39 for optiarc dvd rw ad - 7503b ata device windows Vista
My optiarc DVD RW AD - 7530B IS NOT WORKING in WINDOWS VISTA