T-mobile AWS HSPA + lost connection
I have a unlocked Atrix HD of Bell Mobility and I use it on t-mobile. first days were great! I have hspa + with speeds of at par with my old feeling. However, ive been stuck on the edge since this morning. I played with my phone checking if tmobile has informed their hspa refarmed pcs network in my area by using the service menu. Since then, I could not bring the AWS HSPA +. Any suggestion or help is very appreciated.
One last thing - because I see that some use the Atrix HD unlocked on T - mo, the issue could have been connected to your area.
But there are service menus that are not designed to be user accessible - make changes to some of them are permanent. If you have made a permanent change, you will need to send your phone in service.
The only way to tell for sure would be to use a Bell SIM card and see if you get 3g. If this isn't the case, then you missed something.
Tags: Motorola Phones
Similar Questions
-
Keyboard Smart ipad pro, lost connection
Hello
Why my smart keyboard sometimes lost connection with the pro 9.7 "ipad. Then after rebooting the ipad it works again. But its always like that. Is there any problem or how to fix it?
Thank you
Hi Budi73,
Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iPad Pro and your Smart keyboard. Since the Smart keyboard uses the contacts of the Smart connector on the side of your iPad Pro, if you are having problems with intermittent or loss of connections, you can check the contacts as described in the following article:
Get help
If your iPad Pro does not detect your Smart keyboard or you see an 'Accessory not supported' alert on your iPad Pro, make sure that there are no debris or plastic on the pins of the Smart connector on the keyboard or the Smart Connector on the iPad Pro. Also, try the following steps:
- Make sure your iPad Pro and Smart Keyboard are in a position to Type .
- Remove the Smart keyboard for your iPad Pro.
- Restart your iPad Pro.
- Reconnect the Smart keyboard.
Use your Smart keyboard with iPad Pro - Apple Support
Concerning
-
Lost Connection using the Magic Mouse
For a week, whenever I move the mouse, it freezes with a pop - up message "lost connection". Click again and the connection is re-established. I replaced the batteries, but the problem persists. This week, the problem got worse. All solutions?
Hello Carolyn,
Can you tell me a little more about your mouse and the machine that you are using. Your profile says you're on 10.5.8 which means that you use the system to Leopard. Is this correct?
Can you tell me what brand of batteries you use and whether they are regular or rechargeable?
If you hold the mouse upside down is the flicker of green light or is it stable?
If you shake it is there any noise from traffic on the inside?
-
My mouse wireless guard saying "lost connection". It takes time for it to reconnect. Wireless keyboard is OK. Apple store said that it may need a new Bluetooth "card." Any idea the cost if necessary. I tried a new mouse, with the same results. Having to use a "wired" mouse now taking a much-needed port on my iMac.
I return to the store and get a better answer. Material, of course, could be the problem. As far as I know, there is no such 'map '.
Reset the PRAM and SMC... can't hurt, might help.
Barry
-
Windows Server 2012 lost connectivity
Hi all
I created 6 virtual servers Windows Server 2012 R2 Standard. However, there are 2 weeks 3 to 6 servers randomly lost connectivity (ping returned request) outdated, unable to control remotely,... several times until I have restart servers, connectivity was back. Even if 3 other servers do not have this problem.
I found the following error events in the event viewer, I don't know if they cause this problem or not:
Log name: SystemSource: SchannelEvent ID: 36888A fatal alert is generated and sent to the remote endpoint. This can lead to the termination of the connection. The defined protocol TLS fatal error code is 40. The Windows SChannel error state is 252.Reference: https://msdn.microsoft.com/en-us/library/windows/desktop/ms678421(v=vs.85).aspx
-------------
Log name: SystemSource: NETLOGONEvent ID: 5719This computer was not able to set up a session securely with a domain controller in the domain GHPFE because of the following:Currently, there are no available connection server to process the logon request.This can lead to authentication issues. Make sure that this computer is connected to the network. If the problem persists, contact your domain administrator.MORE INFOIf this computer is a domain controller for the specified domain, it puts up the session for the specified domain PDC emulator. Otherwise, this computer sets up the session secure at any domain controller for the specified domain.Microsoft warning serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.
-------------
Log name: ApplicationSource: CAPI2Event ID: 4107Has not taken from the root list third-party auto update cab at: http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: these data are incorrect.-------------
Log name: SystemSource: Client DNS eventsEvent ID: 8015The system cannot save the host (A or AAAA) resource records (RR) for the network adapter-------------
Log name: SystemSource: Group policyEvent ID: 1054The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Check your service provider Internet (DNS, Domain Name System) is configured and working properly.Microsoft Cause: This problem may occur if the address of a preferred DNS server configured on the client is invalid or is inaccessible.
-------------
Is there anyone know of this problem and the resolution to it? Help, please.
Thank you
Khiet Manh
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
Try to synchronize a mobile laptop and it connects via bluetooth, but will not be synchronized
try to synchronize a mobile laptop and it connects via bluetooth but will not synchronize what I am doing wrong
Moved from feedbackOriginal title: device"You run a form any of sync on the PC software, usually supplied with the ' phone or available for download on the ' phone manufacturers site.
As you do not tell us that "phone and helps OS it runs there is little more we can give." -
HH.exe crashes - lost connection to the online help and Support window
HH.exe crashes - lost connection to the online help and Support window
SYSTEMATICALLY, FOR MONTHS, WHEN I SEARCH WINDOWS HELP I got THE MESSAGE.
"You have lost your connection using Windows and Support website. . Try to connect again. "Windows Error Reporting shows several times:
- HH.exe hangs and does communicate with Windows
- MsSearch TerminateProcess & #x000d
- ApphelpSoftBlock & x000d #.
I have no problem connecting to Windows Web sites otherwise or to other sites on the web.
Can someone tell me how to fix this?
(I'm running VISTA 32 bit)
Hello
This behavior is caused by a corrupted or damaged HH. DAT file.
This may occur if Antivirus or a firewall, you have installed the program it blocks.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks -
When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?
Information System
------------------
Time of this report: 13/06/2011, 19:40:20
Machine name: BEN - PC
Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
Language: English (regional setting: English)
System manufacturer: HP-Pavilion
System model: GC670AA-ABA a6120n
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
Memory: 4096 MB RAM
Available OS memory: 3582MB RAM
Page file: 1690MB used, 5472 MB of available space
Windows Dir: C:\Windows
DirectX version: DirectX 11
DX setup parameters: not found
User DPI setting: 96 DPI (100%)
System DPI setting: 96 DPI (100%)
DWM DPI Scaling: disabled
DxDiag Version: 6.01.7601.17514 64 bit UnicodeTwo monitors
Display devices
---------------
Card name: NVIDIA GeForce 7600 GT
Manufacturer: NVIDIA
Track type: GeForce 7600 GT
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
Memory display: 1768 MB
Dedicated memory: 248 MB
Shared memory: 1519 MB
Current mode: 1600 x 900 (32 bit) (60 Hz)
Name of the monitor: generic PnP monitor
Monitor model: G205H (Acer)Card name: NVIDIA GeForce 7600 GT
Manufacturer: NVIDIA
Track type: GeForce 7600 GT
DAC type: Integrated RAMDAC
The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
Memory display: 1768 MB
Dedicated memory: 248 MB
Shared memory: 1519 MB
Current mode: 1280 x 1024 (32 bit) (60 Hz)
Name of the monitor: generic PnP monitor
Monitor model: NEC LCD7VHello
I suggest that you have watch the following link below:
http://forums.developer.nvidia.com/index.php?showtopic=5331
I hope this helps.
-
VPN client, lost connection
Hello
I pix506e here... and vpn clients connected.
But suddenly lost connection vpn client 40 minutes and then try to reconnect again but fail. If the vpn client restarts their pc/notebook...yes it can connected to vpn again... but the interruption of the connection again... then restart... and so on... What is the cause of this problem?
Thanks for the help
Tonny
All remote VPN clients are having the same problem or is it limited to just a few. If the problem is seen with only a few, it is quiet possible that the problem is not with the PIX of the customer. In addition, the DPO is enabled or not. DPD will cause tips to know an IPSec connection over, where the SAs flusing, allowing new being negotiate quickly.
-
Passport BBM - BBM has lost connection. Error
Just got a new passport BB yesterday and followed the installation procedure. After that I get the main phone, I tried to access BBM. Initially, he showed a screen with stickers and a few links ToS and EULA. Once hit accepted, he deleted and after a few minutes, shows the error message: "BBM has lost connection. Can not connect to the server.
It is on OS 10.3. 0 675
and BBM version 10.4.4.8 (everything has been updated during installation)
The only thing that I could find on the database has information about a building of BONES cast in 10.2
Hi @fj_langlais
Can you check to see if you get the same error when you check the software updates?
Using a new BBID or one that has been linked previously to another device?
Do you know if you are connected to the BlackBerry Internet Service? You should see the BlackBerry Logo next to your signal at the top of your home screen indicator.
Can you try to send a PIN message?
1. open the Hub and select "Message of PIN.
2. Select "dial."
3. Enter your PIN in the field "to".
4. press on "send".
Note: To find your PIN go to settings > topic > category > hardware
If the fails to send a PIN message recording unit to try to give, the following BlackBerry Knowledge Base Article explains how - KB00510: how to register a BlackBerry smartphone with wireless network
Once you have done that try yourself send a PIN message a second time, and see if its sent successfully.
Let me know how it goes!
-
my mobile big samsung no connection to my pc using a cable what should I do
my mobile big samsung no connection to my pc using a cable what should I do
Hello
Please follow:Hope that will be useful!Thank you -
HP DV6T-1300 lost connectivity to the internet, error display 701
I have a laptop HP DV6T - 1300 Entertainment who has lost connectivity to the internet, and it displays error 701. All of my diagnostic checks, I think that he has lost the pilot because he does not have a wireless card. I downloaded the drivers wireless (five each) HP support and assumes that the Realtek driver is the original. What is the purpose of all other drivers (Broadcom, Atheros, Wireless & Bluetooth Pro) and they need to be installed or not? They are updated day or improvements or are drivers for the other cards in different models of this computer? I use the laptop for my wife to access the net until I fix this. Thanks in advance!
After that to install the Realtek driver (original), I discovered that the software does not recognize that there is a wireless card. In my view, the map is part of the motherboard and may have failed. I suspect that my best solution may be to buy an external wireless card and install it. Any suggestions?
I don't know exactly what happened, but after restarting a couple of times, the wireless card started working again. He works actually better than what he has. The downloaded driver was an updated version, and this may explain the improvement.
Different cards for different models of different computers in your model class. You only need the driver for your system.
The updated driver for your model of correction probably your problem. The fact that it works better than before is, of course, a plus.
If you don't already have it, here is the wireless connection manager:
HP sp54945 V4.1.25.1 Connection Manager
Connecting to a network with the 4.x connection manager
For your reading pleasure:
Domestic use Wireless-G and Wireless-N devices on a network
-
I can't install Adobe Flash Player. I have windows 7 64 bit and firefox browser. During installation, that I get a message "lost connection", followed by "trying to reconnect", then cannot connect
Please use the Offline Installer
Internet Explorer:
http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/Install_flash_player_ax.exe
Firefox and other NPAPI browsers:
http://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/install_flash_player.exe
-
Hello
I desperately need help. I tried to update my adobe flash player, but he kept getting 33% and then he said that it has lost connection (I know that there are no problems with my internet connection at the moment). I tried saving the file on my file to download and then running and now tried to uninstall and install it... and the same thing again and again, I'm stuck at 33 percent. Now, I have no drive at all because of me that I had the uninstall. Please please help
Installers in offline mode:
-
Installation of flash player dies at 33% lost connection, can not reconnect
WinXP
Tried FF, IE, Chrome.
Tried to uninstall, clear cache close all browsers
Tried to download the NPAPI to install direct link (still trying to download after 5ish minutes)
Whenever I get the same result; It downloads, start installation then loses connection and cannot reconnect.
Help! Please, I beg you.
Hello
The installer of the hold (as indicated by the screenshots) downloads / installs Flash Player silent mode. Connection/network latency problems can lead to lost connection. The full download installers the entirety of the original file and launched once do not make any other downloads in the background. If you encounter connection/network latency problems, please try to download the full installation programs displayed at the bottom of the of installation problems. Flash Player | Windows page, in the section "problems".
--
Maria
Maybe you are looking for
-
Where can I find guides to replace the backlight for satellite A210 - 1 4?
My display does not illuminate. I need to check a number of things, including the backlight, inverter and door switch. May need to replace the whole LED display. Does anyone know of instructions to do these things with this particular model: Toshiba
-
Satellite A100 - line number on the keyboard does not work when you enter the password
I have an A100 / Pro A100 series satellite laptop, what ever that means.Anyway, when you turn the laptop on and asked for a password, I am unable to put in number.It appears to the integer line, including BACKSPACE don't work. I can use the mouse to
-
I can't download AdobeReader 9.3. Their teaching not JAV
I can't download AdobeReader 9.3. Their instructions don't JAV URL of affected sites http://
-
Satellite 5105-607 battery issues
Hi, I bought for my satellite 5105-S607 a refurbished battery. Unfortunately, this lasts more than 6 hours battery charge from 3% to 100%! Only, every morning when I start the PC after it was extinguished during the night, I found it has lost 8% of i
-
Pavilion Elite HPE-170 t - Wi - Fi adapter with antenna?
I would like to connect to a desktop Pavilion Elite to a local network. The router is a Linksys EA3500 (802.11n technology). The distance between the router and the wireless adapter on the desktop will be about 30 feet with walls between the two. The