T2130CT - mouse PS/2

Similar Questions

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• The keyboard and the mouse no longer works to update you Sierra

  Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.

  Thank you

  The keyboard and the mouse no longer works to update you Sierra

  Hi gnardone,

  Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.

  You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.

  Best regards.

• My magic mouse has stopped working.   Is there a battery that I need to replace?

  My magic mouse stop working.   Do I have to replace a battery?  If so, how?

  If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.

• New Magic Mouse (wireless) works erratically

  New Magic Mouse (wireless) said low battery but it does not use a battery? How to charge it?

  The Apple article below should help.

  Recharge the battery in your Apple - Apple Support accessory

• the magic mouse disconnects regularly

  Since last week my Magic Mouse is losing connection with my iMac (OS X Sierra) pretty regularly--several times each hour, sometimes more often - the connection is only lost for 5-10 seconds, but it's a lot of time when you're trying to work. Anyone else had this problem and had been able to find a solution?

  If your Magic Mouse is version 1 (with batteries), it won't be to fully integrate with Sierra.   You can buy Magic Mouse 2 for that.   Because all future operating systems need, you may as well buy now.

• How can I change the color of Minnie Mouse dress?

  Announcements see the dress of Minnie in red, yellow or blue, but I did not understand how this change in the function 'customize '.  It's three different dials or I missed something?

  Hello

  Follow these steps to change the color of the dress of Minnie:

  • While the airtime on the dial of Minnie Mouse, press firmly on the screen, then press the Customize button.
  • Swipe left / right to switch between the three screens of personalization:
    • The first screen allows you to switch between Mickey and Minnie Mouse by turning the digital Crown.
    • With Minnie Mouse selected, the second Customization screen is used to change the color of her dress, once again by turning the digital Crown.
  • When finished, press the digital Crown twice to return to the watch face.

• Connection keyboard and mouse USB Wired stall

  Hello

  My computer repeatedly interrupts the connection to my Wired USB mouse and keyboard.  Usually around one every 30 seconds, the connection falls for 1 to 1.5 seconds, then comes back.  Meanwhile, the cursor hangs - I can't click anything, and I can't press any keys on the keyboard.  For example - when I type, I have my keyboard will stop working for a while, and no text will appear.  This is particularly problematic when I play games.

  I tried to reboot the computer, reset the SMC and the mouse and keyboard.  I also tried all USB entries on my mac (4 in total), and the problem persisted with each of them.  This leads me to believe that it is either a problem with all the USB inputs, or a software problem.

  I have an iMac 27 inches, mid-2011 with OS X El Capitan 10.11.6 (specifications: 3.4 GHz Intel Core i7 processor, 16 GB with 1333 MHz DDR3 memory and storage capacity of 2 TB).

  I use a wired USB (Logitech G402) mouse and keyboard USB Wired (Razer BlackWidow Stealth).  I have the latest version of Logitech Gaming Software and Razer Synapse installed for support.

  I would appreciate help.

  Check if there are updates available driver.

  To check if the problem is with the USB to your Mac controller, test with a different keyboard or mouse.

  To check the extensions conflicts, etc., try the startup mode.

  -----

  Restart in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system performs some cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• Is it possible to change the sensitivity of the mouse in the sierra?

  Is it possible to change the sensitivity of the mouse in the sierra?

  Open system preferences > mouse

  See: Customize your mouse > the basics of the Mac: set your preferences - Apple Support

• After the update of Sierra: not to Disable Trackpad with Magic Mouse connected

  Hello

  After that I updated to macOS Sierra on my MacBook Pro the Trackpad is not disable mouse connected with Magic.

  Feature: MacBook Pro retina 15 inches (end of 2014) on macOS Sierra.

  Since the update, I noticed that my stays compatible with my Magic Mouse connected after built-in trackpad window connection.

  In system-> accessibility-> mouse and Trackpad preferences, I have not "ignore the built-in trackpad when mouse or trackpad wireless is present". If I switch it off and on again once again, the parameter will be.

  However, once I lock the device (user name right-> connection... window) and reconnect, the trackpad works. You must pass the parameter each time.

  Is this a bug of Mac OS Sierra (can't find anything) or am I missing something? I am aware that the trackpad is reactivated at the login window, but before it will deactivate after logging in.

  I don't use Magic Mouse, but I have USB Wired mouse and I have the same problem since installing Sierra.

  I have the box ticked, but I must go and clear the check box and then save.

  I have to use a mouse all the time because my trackpad goes haywire and I wasn't able to find a solution for this. It moves its own and open stuff on its own.

• Magic Mouse works only with the latest el capitan

  Why Apple is not the problems with El Capitan (10.11.6) and it's Magic Mouse? The only way is connected to my MacBook Pro is to remove the com.app.bluetooth.plist at the end of each session and even that does not always work. When it is finally connected, the mouse connects and reconnects constantly during the session. The mouse is an Apple product, and Apple does not seem to recognize the problem or give anyone a viable solution.

  Determine that the problem is inherent in the software is an act of faith (there is no batches of messages here with the same problem).

  Try resetting the SMC and the NVRAM.

  Barry

• My wireless mouse works fine everywhere except in Mail. It is simply not to scroll or work at all.

  My wireless mouse works fine in all applications except Mail, where it does not at all. It is altogether we els and absent when I try to use it either as a pointer to a specific e-mail or use it to scroll. It simply is not there. What gives?

  Please could you tell us what operating system you are using.   It isn't iOS with an iMac.

• Problem of cursor or mouse

  Since the upgrade to Sierra, the cursor or the mouse does not work properly with Lightroom CC 2015.7, version "safe Sierra. It could be a problem for Adobe but Lightroom and Photoshop have been updated for Sierra and only Lightroom has the problem. Oddly enough, Photoshop works OK. In addition, the Sierra of Lightroom, 2015.7 security update, worked perfectly with El Capitan, without any problem of cursor or mouse. So I guess it might be problem Sierra or Lightroom allowing customers to loss. The Magic Mouse and the Mighty Mouse mice are problematic.

  The main problem for me is that the cursor has become limited in controlling sliders and tone curve points.

  Someone else?

  Yes, the same problems here. With the help of Macbook Pro 13 '' end 2014 on macOS Sierra & Lightroom 2015.7. Strange behavior when using the sliders and the points of the curve.

  Do not forget that what was already a problem once after a LR update - so I guess it's at the end of the Adobes.

• Apple mouse and Macbook Pro

  Hi, after I did an update to Yosemite when the macbook enter mode standby and I turn on it after that my apple mouse failed to connect again. I have to restart the laptop for the mouse working again (connect). I did an update for Sierra & this problem continue. How to fix? (My macbook is an i7 - 16 GB of ram - hd SSD 256)

  Hello! Have you tried to disable the bluetooth device pairing and pair it again with your MacBook?

  Using a mouse, the keyboard or trackpad with your Mac - Apple Support Bluetooth

• I think that my safari is infected with the virus, he on redirect keeps me from another Web site each time that I click my mouse or press a key on my keyboard... Help!

  I think that my safari (Yosemite) is infected by the virus, he on redirect keeps me from another Web site each time that I click of my mouse or press a key on my keyboard... Help!

  I can't seem to download the print screen, here, anyway, it starts the LINK share appears every time it redirect:

  -"ps4ux.com/click? h = Ax722bagzrmWM3RP_5wPSvP63fG7dqaJCNo55LiVexxUaivPBxSeS7A3C2V4-bO...» »-

  middle part is hidden by «...» »

  the last part is:

  -"ttp: 3% a % 2F % www.apple.com%2F 2F & rt = 46 & date_sid = 50fc88582b4e8512b3e35e56351a22a3" in a new tab.

  Run etrecheck to go to etrecheck.com and see what is running under the hood.