T232HL touch screen with windows 10 problem

Similar Questions

• Touch screen with window 7 problems

  The touch screen does not work on the PC.  It was working and just stopped one day after an update.  I have WIndows 7 Professional.  I had the PC for about a year.  He worked until about 3 weeks ago.  I went to control panel or device and looked at the Hardware\pen and he's not here.  It was there, but not know and it's on the other PC with windows 7 Professional that I have.

  The touch screen does not work on the PC.  It was working and just stopped one day after an update.  I have Windows 7 Professional.  I had the PC for about a year.  He worked until about 3 weeks ago.  I went to control panel or device and looked at the Hardware\pen and he's not here.  It was there, but not know and it's on the other PC with windows 7 Professional that I have.

  Download and install the drivers from the manufacturer of the component/system devices.  Material is supported by its manufacturer - including all the drivers and other software.

• TouchSmart 610-1120: Touchsmart 610-1120 and touch screen with Windows 10

  Upgrade to win 10 without any problem, I found that this touch screen is no longer available. It seems that there is not a suitable driver for the manipulation of the touch screen, under Win 10 is this corret? Or why it doesn't work on my computer?

  Thank you

  Hello @eferrari,

  Thank you for being an active member of the HP's Support Forums.  I understand that since the upgrade to Windows 10 that your computer desktop TouchSmart 610 - 1120une no longer has the TouchSmart feature.   I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  I checked the drivers for your desktop computer, and there is currently no Windows 10 driver. I recommend that you please begin by examining Microsoft Windows 10 Configuration required to verify that it will support Windows 10. He never did hard time for use as a check. Another good reference is the document of desktop HP - upgrade to Windows 10 . There the measures to take before and after the upgrade.   The document of HP products - Solutions for Windows 10 has also some suggestions for where to find Windows 10 drivers and software for your model.

  You can also use the link "Troubleshooting Windows Update tool" from the following link. You can 'open' or 'Save' the resolution of problems. She will be working to win 10, regardless of Windows 7 is in the URL. http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter. Once launched it please use the second "Background Intelligent Transfer Service" option, this should lead to an update of the "Windows updates" cannot automatically applied.

  Please return and view the results of your troubleshooting.

• Display screen with Windows 7 problem

  Original title: Monitor problem

  Before I explain my problem.

  First of all, let me tell you a little about myself.  I'm 73 and I am a Novice in computers and do not consider myself an expert...  I have a degree in electronics with over 40 years of experience. I've built several computers for family and friends for years.  The problem, which I'll explain you completely confused me.

  I have a 24 "I-Inc monitor that I bought in 2008.  It has a nice clear image that never changed.  Best deal I've ever done in the monitors.  This monitor is connected to my computer main clocked i5 of operating system: Windows 7 Ultimate Professional Media Center 6.01.7601 Service Pack 1 (64-bit) fully updated.  Monitor is driven by video card NVIDIA GeForce 210

  Then, all of a sudden a few weeks ago the screen on the monitor began to go dark and back, dark and backward, dark and back.  The last dark anywhere among the second up to 30 seconds and the flashing would go one to five minutes.  Then stop and everything is fine.  So maybe some time later, I went to a different Web site it would start again.  Now, let me say clearly, there is nothing wrong with this monitor or my PC, which brings me to my next story.

  After fighting this monster of darkness for a few days, I decided to move it to what I call my computer of the workshop.  This computer has i3 cpu with NVIDIA GeForce 210 also in perfect condition.  This computer is also a system dual boot, AND this IS A SAME KEY PART.

  It has Ubuntu 14.04.3 md64 (my PC is 64bt) AND 10 for Windows.  This monitor is also connected with a HDMI cable and when I plugged it in this workshop cpu, I first booted to Ubuntu.  Everything was great for about a minute then the monster of darkness began her dance for about two minutes then stopped and the screen image was perfect.  I flipped around for a while, then the monster of darkness happens again.

  OK, so I decided to stop and start Windows 10.  You may not believe this, but with 10 Windows, IT IS No. MONSTER of DARKNESS... PERIOD!  Still, it is still connected to my cp Studio win 10, and I'm interested in what I type and the image is perfect.

  My conclusions: nothing wrong with the monitor that is always connected to the cp workshop and work perfect.

  All is well with all of my equipment in each system.  I use my monitor backup on my main system and all is well.

  Issues related to the:

  Why this monitor would work to win 10 and not in Win 7, where he worked once for years?

  Hello

  Please provide detailed information on this issue. I apologize for the inconvenience caused to you.

  Sometimes we can deal with this issue because of the incompatibility between the display with your operating system drivers. It is important to update the computer and drivers also requires the update. I understand that you have tried to solve the problem and it fixed with Windows 10. This could be due to the compatibility of the display adapter.

  In the future, if you have questions related to Windows, please do not hesitate to write us and we will be happy to help you.

  _______________

  Thank you best regards &,.

  Isha Soni

• whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and then restart windows.

  whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error image
  screenshot of error:

  http://sdrv.Ms/Nn8gDA

  memory dump file:
  http://sdrv.Ms/NiXJdJ

  Also, can you provide the latest files minidump since reinstalling the NIC driver.

• How to activate the touch screen on Windows 8.

  Original title: How can I activate this touch screen of toa

  How can I make my computer a touch screen

  Hey Cindy.

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see you want to how to activate the touch screen on Windows 8.

  I've surely you will help solve this problem. Let's try a few steps that will help you solve the problem.

  If the computer has the features for touch screen computer and you want to enable you can try the procedure described in the article and check.

  a. press on the key Windows + Q.

  b. type Control Panel.
  c. go to the Sound and material.
  d. click on Pen and touch.
  e. click the contact tab .
  f. Enabthe use your finger as an input.

  For more information, please see the link.

  Contact: call, tap and beyond
  http://Windows.Microsoft.com/en-in/Windows-8/touch-swipe-tap-beyond

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• touch screen of Windows 8

  How to remove something a touch screen of Windows 8 (Tablet Dell)?

  Press and for a brief moment, and then let go to get a menu.

• can I use a touch screen with photoshop CS6 and Windows 7

  I need to define specific image areas to make a binary image of the organelles in an electron microscope of a cell. It would be much easier by using a pen as a mouse. Can I fix a touch screen to my computer monitor and use Windows 7 and Photoshop CS6?

  Hello George,.

  If I myself remember well touch sensitivity was introduced with Windows 8 and improved in point 8.1, so I doubt if a touchscreen monitor would work. You could easily use a graphics tablet, but enjoy the extra convenience of drawing on a screen with a science-based application.

  Hope that helps

  Terri

  PS you have a name very famous Professor George Porter was an English Nobel Prize chemist a few years ago - I had the chance to go to one of his at the Royal Institution Christmas lectures, a very clever man.

• Firefox works with the touch screen technology windows 8?

  Plan to buy all-in-one touch screen pc and want to know if Firefox browser works well with this technology.

  Yes it is on the right. as the article linked in my response earlier said that the touch interface is currently available in early development builds, which are mainly for the developers and users very advanced and not recommended for daily use. Firefox 26 will come on the aurora in mid channel one to beat late October - these build would give you the opportunity to test and to discover the new format in a more stable form (provided that the calendar holds).

  https://www.Mozilla.org/Firefox/channel/

• 15 - j078ca touch screen click on spam problem

  I'm having a problem with the touch screen on my 15-j078ca. I don't know if it's a hardware problem or a software/driver problem.

  What is essentially:

  1. I have the laptop running.

  2. I would like to disconnect the laptop.

  3. I was closing the lid (the value of doing nothing)

  4 look for my laptop and market in another room.

  5. open up the lid of the laptop and the touch screen would constantly spam clicks on the left side of the screen.

  I have to put my laptop to sleep, then wake up back for clicks to stop. It is a minor inconvience but I feel frustrated that I can't continue my work if I go with the laptop.

  Are there any suggestions to solve this, or is this a manufacturing defect?

  Hello BlueMinnow,

  Welcome to the HP Forums.

  I understand that your computer screen click randomly on the left side. I'll do what I can to provide information on this.

  Without adequate testing, it is almost impossible to know whether or not the issue is related to hardware or software. There is a very simple test to say: reinstall the operating system. If you reinstall Windows and the remains of the question, the hardware is defective. If reinstalling Windows solves the problem, it was a software conflict. This HP document allows you to find more information on how to reinstall Windows: How to run an HP system recovery

  This is the best advice I can give you for now. Please try that and get back to me with the results. Thanks for posting on the HP Forums. Have a great day!

  Mario

• T232HL touch screen not working not not - something different

  Several months ago the touch part of the screen stop working (Windows 7 SP1), although the screen itself works well. I lived all the Acer and Microsoft and testing solutions suggested with no luck. Initially after the touchscreen to quit smoking, Windows couldn't find the USB drivers for the part of the touch screen of this monitor. Then after several months, he found a 'CoolTouch (TM) system"pilot for the HID Composite device and Windows now shows that the touch screen is-button entry with 10 Touch Points available Changing the settings of Pen and Touch have no effect. It seems that Microsoft-provided USB drivers have been changed and now are not available for my system, because it will load the wrong drivers when the USB cable is connected. Anyone out there have any idea of what is happening?

  It seems that I received a gift - Christmas the Acer touchscreen mysteriously started working again. I note that the current touchscreen features are very different from the originals, which suggests either Microsoft or Acer have streamlined the entire pilot, corrected the problem and that the drivers now only support standard features of Microsoft. I hope that this continuous touch screen to work correctly, and that whoever is behind the scene screwing with this software will be a bit more diligent in the future.

• How can I activate the touch screen with remote desktop

  I have an Asus ep121 windows 7 home tablet Office remotely to a desktop windows 7 Professional.

  Remote Desktop is not recognized any touch gesture. Windows 7 has a touchscreen native, is backing anyway to force the remote computer to accept the touch input of the Tablet?

  Hello

  Windows 7 has a native touch screen probably support in that. Affect the gesture is unfortunately not possible on desktop connection remotely.

  When a remote desktop session is established between two computers (one with the ability to touch and others with no possibility of touch) as in your case. It may not be a chance to access a computer able to touch with your desktop capable of non-contact, although Windows 7 is touch wiz compatible.

  In order to use the touch features or programs, both computers must be installed with equipment able to touch. For example a touch screen, Touch pad, etc.

  Without compatible hardware on both computers by touch, touch capable desktop connection between two computers remotely maybe isn't possible.

  The only way to create an able to touch Remote Desktop connection is by installing equipment to touch interface on your desktop.

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Sync HTC Touch 2 with Windows 7 issue

  I have just upgraded to Windows 7 Pro (32 bit).

  I'm having problem sync my HTC touch 2 and Windows Mobile Device Center

  Information system is as below:

  Specifications of the PC:

  • Windows 7 Pro 32 bit
  • WMDC 6.1 installed
  • Firewall disabled

  HTC Touch 2:

  • Windows Mobile 6.5
  • Faster data synchronization of Active Sync activate is disabled.

  Problems:

  1. Windows 7 does not recognize the HTC Touch 2 phone.
  2. Error, instruction: driver software is not correctly installed.  Unidentified aircraft.

  Unsuccessful troubleshooting so far:

  1. Reinstall Windows Mobile 6.5 (the HTC Support boards)
  2. Changing cable USB (the HTC Support boards)
  3. Remove unknown device in Device Manager, disconnect the phone
     Uninstall WMDC
     Reinstall WMDC 6.1
     Reconnect the phone
  4. Disable windows firewall

  Help, please...

  I just wanted to know all that I fixed it.  The problem was with the ActiveSync settings on the mobile phone and not Windows 7.  Here are the steps.

  (1) open the "ActiveSync" application on the phone.
  2) click on "Menu" at the bottom of the screen.
  3) click 'connection '.... ».
  (4) CHECK the box "Synchronize all PCs using this connection" (when it is cradled).
  (5) in the drop-down list, select USB.
  6) press OK.
  7-reconnect to your computer.

  Regerds.

• touch screen of Windows 8 Panasonic toughbook CF - 19 c

  I have a fleet of Toughbook CF - 19 convertible laptops / tablets that are in serious ned of the upgraded operating system. So in the spirit of customer loyalty, I chose two sepreate CF - 19 c is in the beta test of windows 8 on before the entire fleet. iattempted it work with Windows 7 and result severe hair loss so I reinstalled XP factory and expected assuming that the problems would be solved with window 8. ....... OOOOPPPPPPS now here's my problem, that the operating system display of the system that "no pen or touch input is not available for this view" which, in itself, is not true, as the CF - 19 c has a touch of the screen works when Windows 8 running however the problems are that;

  1. direction of rotation in tablet mode does not work

  2 keyboard is not launched in tablet mode

  3. the pointer is severely need calibration sound 1/2 that of a 10-inch display is a mile off

  Windows 8 won't let me enter the calibration because it does not recognize the device

  first of all if the drivers did not work NONE of the touch screen capabilities would come

  I checked the Panasonics site and spoke with technical support apparently there drivers somewhere but nobody can find them how see it me to Microsoft since it hardware works just not calibrated, microsoft referred me for Panasonic...

  I just need to be able to calibrate my touch screen and let my on screen keyboard work.

  Oh, and in addition the keys on the front of the shelf work more or the other.

  Hello

  The models CF - 19 digitizer support Windows XP Tablet Edition. The models CF - 19 touchscreen supports Windows XP, Windows 2000, and Windows Vista.

  Windows 8 is not supported in touch screen Toughbook CF - 19 c, we can try to install the drivers in compatibility mode and check out.

  You can download the drivers designed for Windows Vista, Windows XP and install it using the compatibility mode of Windows 8. Follow the steps.

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click on run for earlier versions of Windows programs

  (e) click Next, select do not appear. Click next

  (f) click Browse and select the installation program that you downloaded via the link above.

  (g) click Next, click the troubleshooting program

  (h) check the program worked in earlier versions of Windows, but that will not install or run box now

  (i) click Next, select the latest OS known functional for this driver (probably Windows 7)

  (j) click Next.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Be sure to update all the drivers to the latest drivers of Windows 8 and also run Windows updates regularly.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• I use the touch screen of Windows 8, and after that I use it, my mouse pointer disappears

  My problem is similar to other positions, but not exact.

  When I use the touch screen of my computer in windows 8, the mouse disappears and does not come up until I restart the computer.  After the restart, if I use the touch screen, even once, the needle does not again.

  Hi Tony,.

  This problem is caused due to conflicts of device, you will not be able to use the touch cursor when a mouse is connected. You will be able to tap on the touch keyboard, but when you scroll or drag the mouse cursor disappears. I suggest you to disable one of the device and check if it helps.

  To disable the touch screen, refer to the following steps:

  a. click the Start button and click Control Panel.

  b. access the material and audio.

  c. click Pen and Touch.

  d. click on the contact tab.

  (e) uncheck the box use the finder as input, this disables touch and stylus.

  Otherwise, you will need to disconnect the mouse.

  Please reply with the status of the issue so that we can better help you.