T30 wireless problem

My father put in place a new wireless network, but the laptop will not connect to the new network. The strange thing is that the new wireless network works fine on other computers in my house. I need a way to solve this problem, which does not buy a new laptop.

According to the T30 model, these machines had 802. 11 b support. One model had a mini-PCI 802. 11B of Cisco. The fastest and cheapest to get this old machine to a wireless network currently supported is to purchase a 802.11 g USB adapt. They are available for about $50 and less.

Terry

Expert systems Lenovo Enterprise

Tags: ThinkPad Notebooks

Similar Questions

  • WAG320N wireless problems

    I am having major problems with my Linksys WAG320N. Hoping someone here can help as I am quite clueless when it comes to networking.

    Without changing the settings, the other day that my Macbook Pro could not connect and he kept saying 'timeout '. From that point my iPhone also refused to sign, although access to the internet on my MBP viaethernet was fine.

    I did a hard reset according to the instructions of this forum, and then re-configured with the installation CD. The router wireless light was turned on but my MBP did not see the network. Finally, I managed to connect after I restarted my laptop and enjoyed every 10 minutes without internet connectivity before wireless problem network come fall and now does not appear in my list of networks once again, even if the wireless light is still on.

    Ethernet connection still works, but not via the wireless.

    I restarted my laptop and the router and tried switching channels on the router, all to nothing done. Very confused and frustrated!

    Someone at - it suggestions? Thanks in advance for any help.

    What is the wireless settings you have set up on your router (SSID, channel and security mode)?

    Connect to your router configuration page and click on the Wireless tab and click on the "Advance Wireless Settings" sub-tab and under change 75 beacon interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

    Now let's see if you can locate your wireless network and try to connect...

  • T40 2374-PU3 wireless problems

    T40 2374-PU3 Wireless problems - I tried every driver and followed instructions to install several times.  I was able to install it successfully in the past (about a year), but do not remember with the version of the driver that I used.  Using WinXP SP2 - just installed.

    Help, please!

    Thank you!

    Welcome to the forum!

    Here is your wireless driver:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-42683

    After uploading, be sure to check out according to the instructions on the download page.

    I hope this helps.

  • S10 - 3T wireless problem

    My rig to receive yesterday and fought wireless problems.  Thought, he was my network for some time and found if I close the 3 t of the network works fine.

    The 3 t at this point works well on the network but sometimes slow.  However any TIME that I try to download a file, it works as usual for a while then just dies.

    Stop downloading and it is surfing.  It seems also to kill or slow down the network to a crawl at the same time.

    I tried to update the drivers in Device Manager and it says they are the best already.

    Any thoughts?

    Thank you for your understanding.

    The ends of the ongoing saga I think.

    I went to Burger King this morning and connected to their hot spot and the thing that worked great - downloaded a large file on site.

    Lenovo, I called and they told me to uninstall the software Lenovo 5 ready.  I did and rebooted and it worked fine and still seems to work very well ;-)  They said that it causes conflicts.

    Worked on my unit anyway.  This happens on a platform of Asus here one year, their uninstalled software and it worked fine.

  • Connectivity with printer Epson wireless problems.

    Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

    See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

    Get help to solve the problems of printer on your Mac - Apple Support

    https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

  • Cause first of the wireless problem?

    I've had my laptop repaired a week ago, as the wireless card was more is detected. I bought a dv6258se in Feb ' 07, he was really running hot, the GPU ran above 80 ° C, 55 ° C CPU all idling. I installed F.3D as soon as it was released in Nov ' 07 and there really the time down, and a year later, the wireless gave out. The motherboard was originally a 30B 7 Quanta, and it's still a 30B 7 Quanta, flashed with the version of BIOS F.40 even if my the driver model page shows later as F.3D.

    So, what's the problem? I can probably keep it on the downlow time if it was caused by excessive heat. If I got was a band-aid to keep me more of the extended warranty, while HP does not solve the problem for free once again, then they did a very good job of it. I have not enough income available Clipboard $ 1100.

    F3D is the last Messenger for your model:

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & lang = to & Product = 3340175

    F.40 is posted on other models, but can't say that I recommend:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-64061-1 & LC = on & DLC = in & CC = US & lang = to & os = 2093 & Product = 3546969

  • ZBook 14 wireless problem solved!

    For a few months now, my ZBook 14 (still under warranty) drivers wireless (Intel Wireless - N 7260 BN) were not loading at startup about 50% of the time.  Pilots would almost always successfully load if I restarted, but it was aggravating circumstances somehow.  I called HP Elite ZBook Technical Support and they walked me through several stages, including the uninstall and re - install the latest drivers, but nothing helped.  They arranged for a HP field Support Technician (FST) to install a new wireless card.  Personally, I thought it was a hardware problem, but that seemed to be their next step.

    So, today, their TSP arrived and quickly installed my new wireless card.  Well, it does not solve my problem, so she put the old card in and then began to make inquiries.  What she found is that even though my computer reported that he had the latest version of the BIOS installed, there is NO!  06/02/15, I allowed my computer to update to the latest version of the BIOS, which then was 01.30 (release date 09/12/14).  However, she discovered that a subsequent update of the BIOS (01.30 A) had been released only a week after the patch (dated 12/15/14) 01.30 in the desription of the BIOS update he said that it was precisely to add support for my card Intel Wireless-N 7260 BN

    Big CONGRATULATIONS to the girl TSPS for gap identification and the new installation of the BIOS update solved my wireless card problems!  I apparently never thought that because my computer reported that he had the latest version of the BIOS installed, and which does not recognize my "HP Support Assistant" software it was a newer BIOS available, either!

    Just for an update, even after my ZBook is update to the latest version of the BIOS (01.30 A), my "HP Support Assistant" software always reports that my version of BIOS is 01.30.  It of like the software recognizes numeric characters, but can not see the Alpha "A" character.  Just thought that info may help someone.  Proof that you can't ALWAYS trust your HP Support Assistant software...

  • Laptop HP 650 - network wireless problem

    Hello

    I have a laptop HP 650

    I installed windows 7 x 64 sp1

    I downloaded all the drivers for the HP product page

    I installed all the drivers, but I have a problem with the driver for the wireless network.

    All drivers works fine, except wireless driver.

    What can I do?

    That you help me with some advice?

    Thank you!!

    Best regards

    REMUS

    You are the very welcome.

    Here is the link for the driver you need:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 0 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-118499-1

    He was not on the support page and the driver of your laptop.

  • Satellite A30-PSA30E Intel 2200BG wireless problem

    Hello
    I bought the new wireless card intel 2200BG miniPCI for my Toshiba laptop. I have card connected to the miniPCI slot free and both cables are connected as well.
    My problem is that this hardware switch on the right side of my laptop does not work (no led light). The original Intel software is posting I have material activate this card. Can you help me please?

    Hi Michael

    I hope that you have connected the card properly. The white cable must be connected to the HAND and a black to the power supply please check if the card is recognized and properly installed. The status is displayed in the Device Manager. The wireless adapter should appear under network adapters.

  • Tecra M3 & Port Replicator III wireless problem

    I just bought a Tecra M3 and a port replicator III. When undocked the M3 connects to my WiFi without problem and remains connected. Once anchored it continues to have problems connecting, despite full status of the receiver and after connection bar / disconnect for a while he just gives up and says unable to connect. If I disconnect then it can connect ok. Someone at - it ideas. It can see the network fails to connect properly.

    Hello

    Very simple to solve, you must upgrade the driver Intel Wireless 2200 b/g Intel 9.0.2.25 card or higher.

    Good luck

  • Tecra M2 PTM20E Wireless problem.

    Hey

    I just bought this laptop that was used I installed very different drivers for the wireless, but none of them work. I also have a problem with the battery.

    I think there is a problem with the network card if yes is it difficult to replace?
    Thanks for any answers I've attached screenshots here below

    http://Tinypic.com/r/246883k/6 - network driver cannot click anything that nothing works

    http://i45.Tinypic.com/fdesya.jpg - problem battery sound in a foreign language, but it means windows can't find a driver for battery

    http://Tinypic.com/r/2vtnm7a/6 - no internet connection that you can see that the window is empty

    http://i49.Tinypic.com/bis86c.jpg - home edition everest showing the map as a one intelPro.

    Sorry for the foreign language: P

    One of the photos shows the network cards and it seems that your Tecra supports processors Intel 2200 802.11 B/G WLan card

    Go to Device Manager and check if the WLan Intel 2200 card is recognized.

    If it s not, install the driver WLan Intel (Intel PRO/Wireless 2200/2915) which can be found here:
    http://APS.toshiba-tro.de/WLAN/?page=downloads

    the first photo shows only Intel ProSet is just and only the tool for configuring Intel Wlan driver and NOT so possibly the driver WLan is missing.

  • Spectrum 360 x: Intel (R) Dual Band Wireless problem - unable to connect to WiFi

    Hi, I have problems connecting my laptop to the Internet. The laptop even can't detect wireless networks (despite other devices being able to do), even if it wasn't a problem beforehand. I have troubleshooted and received the message "card Intel (r) Dual Band Wireless-N 7265 problem driver - or related to the material." so I tried to search through the forums. Unfortunately, I couldn't find a solution other than to go to the Device Manager. Under "Network adapters", the Intel (r) Dual Band Wireless AC7265 reports a problem (he has a!). It indicates the status of the device is "this device cannot start. (Code 10). {Operation failed.} The requested operation failed. "Before that, I remember it to be 45 Code, something about the material being not connected.

    I've been to events where it says that the device has been installed but also that "Driver Management concluded the process to install the driver... (..) with the following status: 0x0. »

    I think that this problem was caused yesterday when I closed my laptop - I think it was set up the device / through a kind of update when I forced stop it (the screen was black and I didn't know at the time it was the configuration) and that's when I had problems connecting to the Internet. When I went into Device Manager, it says just something on the device requiring an additional installation, but after reviewing all possible solutions on the forums, it has become a Code 10. I tried to update the driver software, but it says ' window has determined the software driver for your device is up to date ", restart the Internet modem, reboot the laptop, the laptop everything, ranging from recovery reset - all with no avail. Sorry for the very long and detailed post, but if someone could please help, I would appreciate (this is the only laptop I currently and about a week). Thank you!

    Hello:

    Please provide detailed information.

    Here's what I recommend.

    Download the latest wlan driver Intel 7265 AC.  The 2nd driver on the left side of the page is what you want.

    Transfer the driver on your PC with a usb flash drive.  Do not run the file again.

    https://Downloadcenter.Intel.com/download/25603/Intel-PROSet-Wireless-software-for-Windows-10

    Go to Device Manager and right-click on the problem Intel wireless network adapter.

    Select uninstall and check the box uninstall driver.

    Restart the computer and install the latest driver, you just downloaded and see if that solves the problem.

  • AR5007 wireless problem

    I have a Pavilion DV6810US (4 GB RAM) running Vista with an Artheros AR5007 802. 11 b / g card.  For 4 months, everything was fine, and then all of a sudden I can't connect to the internet via my wireless network.  The system recognizes the wireless network, but provides "access: Local only" in the State.  I rebooted the cable modem and the router several times - no change in the situation.  I have other computers running on the network (Dell) and can connect to the internet without problem.  I contacted technical support and tried what they suggested without improvement.  I've updated drivers, etc., the wireless light is on and 'blue '.  This problem is different from the others that I've read in this forum. Any suggestions?

    Download Norton Removal Tool from here.

  • Re: Satellite C660-1CH - device wireless problem

    Hello guys

    I just got my Toshiba Satellite C660 and I have the problem with the wireless device I can't access it. When I press FN + F8 nothing happened. I downloaded from http://aps2.toshiba-tro.de/wlan/?page=downloads Atheros Wireless LAN Adapter - windows 7 x 64, but it does not work.

    NOTE: I have problem with blutooth device also.
    image manager adapter: http://www.9ower.com/uploads/9ower.com9ea213036644581.png

    Hi Wolvrine,

    Exactly, what problem you have with your wireless network card? It is disabled and if you try to activate using the FN + F8 key combination? Or you have another problem?
    Did you test if other FN keys work correctly?

    On other threads, I realized the C660 owners are disabled the Windows power management feature and it worked WLAN energy saving. Maybe it s works for you also.

    Regarding Bluetooth: Satellite C660-1CH is not equipped with Bluetooth

  • Satellite L300 wireless problem - 11 c

    Hello
    I have a problem with my L300 - 11 c.
    I can't find a connection with my router.
    The serial number of my toshiba is: PSLB0E
    If I turn on the wireless switch, nothing happens
    FN + F8 does not work either.

    It says everywhere that there is a wireless network card.
    but in my list of equipment (configuration-> system), it seems to be this card:-Realtek RTL8102E Family...
    I tried looking for an update for this card but could not find.

    I searched further discussions on this issue, but they do not give the answer I need to solve it.

    Please help: p

    It seems that the drivers are not installed properly. The network adapter you mentioned is just for the LAN.
    Wireless network card is the RTL8187B.

    Go: http://eu.computers.toshiba-europe.com (Support + downloads)

    Go to the download page and choose the right laptop type and operating system.

    You need the drivers realtek wireless lan.

Maybe you are looking for

  • iPhone 7 problem of camera Auto White Balance

    Hi guys, got my new iPhone 7 and had been shooting a lot of pictures with it. I noticed that all my whites in my photos appear yellowish and sometimes yellow in my photos may appear to be white / or with deep shades of yellow. I had attached 2 photos

  • Windows 7 desktop clock

    Need a desktop clock secured to replace the clock which is no longer available through gadgets. Clock softonics thoughtful but the download required downloading additional software that I did not understand

  • Ni_database 'display the data '.

    I've done a few data logging; now, I read from the DB with block 'NI_database '. What I want is to show data in a table... My data output is 2D; For now I have just "data block" but is not OK (I need a single table, see all the data at once--or just

  • What services are free of charge and what services cost money?

    What services are free of charge and what services cost money? Somehow I started to receive an invoice for a service I don't remember to help, nor do I remember asking to add to my internet service. I'm always afraid that I don't know what's free and

  • I replaced the processor on acer aspire m3201 and now it won't turn

    Hi there, I have replaced CPU on my aser aspire with a like CPU now the Office not power power up.the is working.the fans kick on a second and when I press the power button goes nothing other that the indicated hard drive turns upward, but when I rel