T310 with S300 in RAID 5 - How to rebuild after replacing a disc?
Got a T310 here with 4x250GB drives configured in RAID 5. Had a disk fails, and the controller signals the RAID as degraded. I replaced the drive with a known good. The S300 automatically rebuilt? I went in the controller menu to make sure that he saw the car, which she did, and I let it sit for awhile, but I do not see that the new drive is part of the table. I tried the hot spare configuration, but it is not picking it up to rebuild the table.
I'm trying to do it in the controller, because Windows runs very slowly at the moment, and I hope that it is because the table is in a drive. I tried to install open manage, but the system seems to hang when it tries to open the executable file.
It is the latest version of the OMSA:
http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=6XJTF&FILEID=3449087462&osCode=WS8R2&ProductCode=PowerEdge-T310&LanguageCode=en&CategoryID=SM
Download the EXE and then run to extract the files. Run C:\Openmanage\Windows\setup.exe, and then add yourservernameorip:1311 to the Intranet of THE area.
Many things may prevent it from automatically rebuild. It should start to rebuild in a minute to be assigned as a hot spare. If not, the drive can not be suitable as a spare drive (too small, bad type (SAS/SATA/SSD), incompatible (NAS, desktop/laptop, not certified), or if the table has become corrupted. Is what model of drive? You ARE able to define it as a backup, right? If this is not the case, make sure that the drive is not listed on the PD MGMT screen in CTRL-R as "foreigners".
Tags: Dell Servers
Similar Questions
-
PE 2950, PERC6, RAID 5 - How to rebuild drive
Hello everyone!
I have a big problem with a PE 2950 with a perc6 / i ctrl and raid 5 system.
disc number 5 amber flashing and the brand utility player as incorrect.
I replaced the drive and now it blinks green... but... I can't rebuild the disk!
How to do? I started the utility bios (CTRL + R at the start), and she acknowledged the new disk as foreign.
When I hit F2 (operation button) on the new drive, I can only start or stop flashing. The menu of reconstruction is not available...
How can I do?
I'll import the foreign config?
Thank you all in advance for your help,
See you soon,.
Steve
If it is the spare foreign reports object import configuration because it was never part of the RAID array.
The status of your RAID 5 is degraded? If so, you can tab over foreigners view tab, press F2 on controller 0 and select this option for foreign claire under foreign Config.
This should put the replacement drive in a ready state, from which you can choose to assign as a global hot spare, which will inaugurate a new building.
-
T310 with sas 6/ir controller replace has no disk in raid
I have a T310 with a sas 6 / ir RAID controller. One of the disks in a raid 1 is a failure. What is the best way to replace the defective drive?
Sorry... I forgot SAS 6 supports can't "make offline". Just remove it.
-
How to recharge my hard drive with photos that are stored in iCloud? After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".
Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.
-
Since the last system upgraded my menu bar top with wifi and time, date etc etc is hidden unless I have sulk my cursor on it. Same thing with apps from shingles. How can I restore it is always there? bar menus hidden-how do I restore?
SystemPreferences-> Dock: automatically hide / show Dock
SystemPreferences-> general: automatically hide / show menu bar
-
The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?
Hi kdwis,
Going to try view > toolbars and activation of the Bar of Navigation and in the bookmarks toolbar.
Hope this helps!
-
I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?
Hello grandpa_bill,
Thank you for your participation in the communities of Support from Apple.
If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.
For more information, see get help using iCloud for Windows.
All the best.
-
Question
I have Mozilla Firefox 9 and I have Kaspersky Anti-Virus 2012 but Kaspersky is not compatible with Mozilla... How can I solve this problem?The patch would be released after January 11, 2012 to settle the problem of the incompatibility of plugin.
Please be aware that you are not less protected, as KIS/KAV products scan on the level of traffic without worrying.
-
Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.
Greetings Dani56777,
Thank you for using communities Support from Apple!
I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.
If you need information on how to update iTunes, please follow the instructions in the following link.
Download the latest version of iTunes for Windows - Apple Support
If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.
Remove iTunes Control Panel and its associated components
Use the control panel to uninstall iTunes and software components in the following order:
- iTunes
- Apple Software Update
- Apple Mobile Device Support
- Hello
- Apple Application Support 32-bit
- Apple Application Support 64-bit
On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.
Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.
Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components
Have a great day!
-
I got a modem Comcast/Xfinity upgrade. Xfinity X 1 modem/router is compatible with the Airport Extreme? How it should be configured to maintain my wireless network?
Whenever you change the modem or modem/router on a network, AirPort Extreme will be reset to the default settings and then set it up again to work properly with the new modem. For this he would be...
Turn on AirPort Extreme for a few minutes... If it is not already turned on
Hold in the reset button on the back of the AirPort Extreme for 7-8 seconds, then release it.
Allow a minute for the AirPort Extreme restart to a slow, flashing amber light status
Make sure that an Ethernet cable connects to one of the four LAN <-->Ethernet ports on the modem/router on port WAN "O" on AirPort Extreme
To start the Setup program, click the WiFi icon at the top of the screen on your Mac and are looking for a list of the new AirPort base station
Just below that, click directly on the AirPort Extreme and then follow the prompts for configuration "Wizard".
When you configure AirPort Extreme once again, you can use the same wireless network name and the same password that you used with AirPort Extreme with the 'old' modem, if you wish, or use a new wireless network name and password
--> -
With Win XP support expiring how save a copy of my XP operating system WITH all current updates.
Just follow the links provided by PML to get the software to make a clone of your current drive.
Or created an installation disk of Windows XP slipstreamed by using your original CD-ROM of MS Winxp Home
http://winsupersite.com/article/Windows-XP2/slipstreaming-Windows-XP-with-Service-Pack-3-SP3-128464
NB you will probably be impossible to use them on new hardware (i.e. a Pc designed for win7 or win8 as this new hardware manufacturer will probably have Windows XP drivers available)
-
Using Windows XP with an access switched. How can I prevent the network Dialer to invite the user connect even if I checked: never establish a connection to the Control Panel, then apply, then OK? She comes right back in a few minutes for: always connect by default. Help! Control panel Connections tab doesn't really seem to apply my change to never establish a connection right back to always make the default connection. What else is there to do?
Hi Richard,
You did it all change hardware or software on your computer before this problem?
You can follow this link & check if the problem persists:
Network connections and remote access troubleshooting
Hope the helps of information.
-
I lost all the file associaation, with the exception of aol, how do I add these files?
Hello
1. what happens when you try to open a program?
2. have you made changes on the computer recently?Try the steps listed in the article below and check.
How to change or choose the program that starts when you double-click a file in Windows XP
http://support.Microsoft.com/kb/307859I hope this helps.
-
I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?
-It used to work and for some reason, now it does not work
Greetings, d_chiuch1104,
There is one thing that I know that you need to check that COULD be your problem. Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).
Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.
It would be good to hear from you as to whether that was the problem!
GL - Bob
-
I have a movie that has a voice language 2 English and french, I want to delete language vocal french film, is possible to do with the audacity program and how?
HelloMain objective of this forum is on Microsoft Products only.I suggest you to contact the support of Audacity for more direct action on the issue.
Maybe you are looking for
-
HOW CAN I KEEP THE UPDATER WEBPAGE MODULE WILL LOAD AT STARTUP OF THE BROWSER?
Whenever I start my browser (firefox version 16.0.1) not only not my load selected home web page, but also the verification of firefox plugin & updates page loading too. So two Web pages open. How to keep the plugin page & updated loading? The page i
-
I'm scanning several pages (5) in a single document. I followed the instructions in the other answers to the questions - I chose the type of pdf file, I chose a less than 300 DPI resolution (I use the default value of 200 dpi), and I clicked on Prev
-
I used a USB 6215 OK. It was working fine. However I had to controll my valves of hardware I/O. I just installed the new USB-6341. I'm just 1 line of control at a time. I'm currently sending a binary or hexadecimal value to control the valve. It is n
-
I installed new cartridges in my lexmark S305, but one of them does not advice?
-
Technical support would call me out of the blue?
I just got a call from a number of Brit Virgin is saying they were with the Technical Support of Windows, I was getting a lot of error messages, and they would show me how to fix them. They wanted to get me intowww.ammyy.com. I asked a callback num