T320/R320 - remote network boot
Hello
I have servers T320 and R320 with IDRAC7.
I am looking for a mechanism by which I can restart them remotely, and ensure that they network boot. However, I do not want the initialization value from the network permanently as the default boot option.
Does anybody know a solution for this?
Thank you very much
Andy
These commands will be PXE (primary integrated NETWORK interface) for the next boot and then restart the system. These commands will not ask you with a menu of PXE boot, but just starting for the primary NIC onboard.
racadm config-g cfgServerInfo-o cfgServerBootOnce 1
racadm config-g cfgServerInfo-o cfgServerFirstBootDevice PXE
racadm serveraction powercycle
Tags: Dell Servers
Similar Questions
-
Elitedesk 800 G2: Elitedesk 800 G2 - auto standby unwanted on with network boot
Hi all
I have a problem with my new Elitedesk 800 G2, which I think is related to Wake on Lan. The problem is that I can't find these settings in the BIOS settings. If I'm just blind?
Description:
Off my PC it remains off for a few minutes. Then, it feeds on and try to network boot. Since I have nothing to start from my home network the attempt fails. After that, it tries to boot from hard drive but also fails because it cannot find a harddrive (?).
Then I have to power cycle the computer to boot normally from the hard disk.
Once it's on, it works perfectly.
I tried upgrading the BIOS yesterday but the problem remains.
Hello!
We have solved this problem.
With 2.15 BIOS and Windows installed 10 (we have more old bios/OS installed on this device), enter BIOS-> advanced-> Startup Options-> search
Legacy-> option to disable boot order
-
Satellite Pro A200: Recovery using a ghost network boot disk
Hi all
Need to ghost several satellite pro a200 machines using a ghost network boot disk. When I use disk ghost provided by the ghost boot Wizard and no boot on PC back I get the message 'No Fast Ethernet PCI Adapter Found!' Serious internal error! (hardware works fine under XP/Vista)
I tried to boot from CD, Mem Stick and USB floppy with the drivers of toshiba and realtek without success, research on google seem to point to there needing to be a driver to interface with the cardbus / PCMCIA adapter - if it IS the case can anyone shed light on the fate of a pilot and how I could continue on this?
Thank you very much
GAV Shakespeare.Thanks for the clarification best regards
-
VPN site-to-Site: several remote networks
Examples of VPN Site to Site ASA configuration that I have met has only a single network at both sites.
If the network/remote site multi-network for example DMZ1, DMZ2, etc. from the INSIDE how can it be added via the wizard of Site to Site VPN ASDM.
Thank you.
Hello
I have not seen an example of specific configuration with the addition of several networks for tunnel l2l IPSEC via ASDM.
Generally speaking, you would just follow the same process in the Sub URL, but add all the multiple networks local and remote networks that you want to be protected IPSEC.
http://www.Cisco.com/en/us/docs/security/ASDM/6_1/user/guide/vpn_wiz.html#wp999348
Kind regards
Arul
* Rate pls if it helps *.
-
EZVPN Mode of Extension of remote network
Hello world
I'm having the extension to the network mode remote ezvpn connecting to the server using pre-shared key authentication ezvpn. The remote router in network extension mode is on a dynamic IP. Now, every time the IP address on the remote router changes the its ISAKMP remain in State QM_IDLE even with peers who were the previous IP addresses of the remote router. When I connect with a VPN client software ezvpn Server tunnel for this customer pulls as soon as customers disconnects.
How can I do the same thing for the remote router in network extension mode?
Having this problem with the extension of the remote network it could easily deplete my resources ezvpn (only 10 tunnels IPSec allowed) if the IP address changes quite often on the remote router.
Thanks a lot for your help.
Kind regards
Remi
It looks like a bug. Use "sh cry his det isa" to see if KeepAlive is indeed active and "deb cry isa" to see that they are sent (you need the "periodic" option to check). IPSec security associations are deleted when IP address changes? Check with "sh cry ipsec his."
-
Access to a remote network through VPN remote access
Hello
I'm having a problem with users who access VPN from home. We currently have 3 offices facility, as shown below. When I VPN in the Philadelphia office, I am unable to access the resources of Connecticut offices or North Carolina.
The VPN subnet is 192.168.10.0. Inside the office of the PA, I have no problem with NC or CT. I have to add a static route from the Pennsylvania Treasury and NC? If so, could you give me a hand with the correct syntax?
Office <-----------IPSecVPN---------->Office <------------IPSecVPN------------->Office of Connecticut from Pennsylvania, North Carolina
192.168.5.0 192.168.1.0 192.168.2.0
Hello
Yes, basically the ASA accommodation the customer VPN service in this case well enough is the same configuration related to two sites with the exception of course which is obvious
- Networks/subnets
- Different ACL for each VPN L2L
Although naturally the problem for me is the WRVS4400N configuration.
Basically, you do the same things on this unit than the other remote site.
You add the VPN pool as another remote network for VPN L2L configurations. You also confirm that there is operation NAT0 for this network also. I don't know I can help you there as I do not know the device.
Can you please mark it as answered and evaluate other useful answers
Naturally ask for more and I'll try to help you if I can
-Jouni
------------IPSecVPN------------->-----------IPSecVPN----------> -
Can I use private as Source IPs from a remote network IP addresses while building the IPSec tunnel? If not why? If so, how?
Your explanation is much appreciated.
Hi Deepak,
In such a situation, you usually NAT traffic that goes to the internet, but exempt traffic that goes through the VPN, because it will be wrapped in packages with public IP (tunnel) addresses. You can use the same IP address on your interface in the face of internet for the NAT/PAT and source of IPSEC Tunnel.
-
How to configure the VPN LAN to access the internet from the remote network
I have set up for our project site to another Office VPN. Please join.
Now I have already configured Site to site vpn between ASA 5510 and 1841 router.HQ LAN
Branch of the LAN
10.2.1.0/24 > ASA 5510 1841 > > INTERNET < 1841=""> <> 10.30.3.0/24
^
^
^
^
Call Manager
No. 2851
Now access from branch LAN LAN of HQ each other.I face problems that are
(1) in the direction of LAN, they can access HQ LAN & resource, but cannot access the internet. I did not configure NAT on the router PH
(2) can I access internet BRANCH LAN via HQ LAN INTERNET. Where can I access the Internet of general management of the LAN of the PH router directly while access to the VPN to the local network of HQ?
(3) in the Site of the Directorate, phone hard cannot work but phone on PC can call to Headquarters. Hard IP phone are same in remote network (172.16.1.0/24 ). What's the problem? How can I configure separately?Please give advise me how should I do.
Hello
(1) in the direction of LAN, they can access HQ LAN & resource, but cannot access the internet. I did not configure NAT on the router PH
Answer:
You must configure the NAT and crossed to the ASA HQ so that the VPN branch router provides LAN and u-Turn, access to Internet of the SAA. You must first seup NAT for the branch on the SAA router subnet, then you must type the command:
permit same-security-traffic intra-interface
Here's a great example for VPN client hairpining.
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
(2) can I access internet BRANCH LAN via HQ LAN INTERNET. Where can I access the Internet of general management of the LAN of the PH router directly while access to the VPN to the local network of HQ?
Yes, you can
(3) in the Site of the Directorate, phone hard cannot work but phone on PC can call to Headquarters. Hard IP phone are same in remote network (172.16.1.0/24 ). What's the problem? How can I configure separately?
You must change your subnet VLANS to be different from the subnet HQ voice phone IP VOice VLAn, it should be fine.
Kind regards
Mohamed
-
Cisco ASA 5505 unable to access the remote network
Hello
I have a Cisco ASA 5505, with 50 basic license, which is connected directly to the Modem cable with a public IP address. I have configured and active VPN on the outside interface. When connect us, we connect well without error, but we are not able to access all the resources on the remote network.
ASA IOS version 8.2 (5)
Remote IP network: 10.0.0.0/24
VPN IP Pool: 192.168.102.10 - 25
I have attached the config: llc.txt
Please let me know if you have any questions.
Thank you!
Hello
Try adding NAT 0 because inside subnet--> subnet distance
NAT (inside) 0 access-list TEST
TEST access ip 10.0.0.0 scope list allow 255.255.255.0 192.168.102.10 255.255.255.224
HTH
MS
-
Cannot access remote network by VPN Site to Site ASA
Hello everyone
First of all I must say that I have configured the VPN site-to site a million times before. Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks
ASA local:
hostname gyd - asa
domain bct.az
activate the encrypted password of XeY1QWHKPK75Y48j
XeY1QWHKPK75Y48j encrypted passwd
names of
DNS-guard
!
interface GigabitEthernet0/0
Shutdown
nameif vpnswc
security-level 0
IP 10.254.17.41 255.255.255.248
!
interface GigabitEthernet0/1
Vpn-turan-Baku description
nameif outside Baku
security-level 0
IP 10.254.17.9 255.255.255.248
!
interface GigabitEthernet0/2
Vpn-ganja description
nameif outside-Ganja
security-level 0
IP 10.254.17.17 255.255.255.248
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. * 255.255.255.0
!
interface GigabitEthernet0/3
Description BCT_Inside
nameif inside-Bct
security-level 100
IP 10.40.50.65 255.255.255.252
!
interface Management0/0
nameif management
security-level 100
IP 192.168.251.1 255.255.255.0
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
name-server 192.168.1.3
domain bct.az
permit same-security-traffic intra-interface
object-group network obj - 192.168.121.0
object-group network obj - 10.40.60.0
object-group network obj - 10.40.50.0
object-group network obj - 192.168.0.0
object-group network obj - 172.26.0.0
object-group network obj - 10.254.17.0
object-group network obj - 192.168.122.0
object-group service obj-tcp-eq-22
object-group network obj - 10.254.17.18
object-group network obj - 10.254.17.10
object-group network obj - 10.254.17.26
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
icmp_inside list extended access permit icmp any one
icmp_inside of access allowed any ip an extended list
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
RDP list extended access permit tcp any host 192.168.45.3 eq 3389
rdp extended permitted any one ip access list
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
pager lines 24
Enable logging
emblem of logging
recording of debug console
recording of debug trap
asdm of logging of information
Interior-Bct 192.168.1.27 host connection
flow-export destination inside-Bct 192.168.1.27 9996
vpnswc MTU 1500
outside Baku MTU 1500
outside-Ganja MTU 1500
MTU 1500 remote access
Interior-Bct MTU 1500
management of MTU 1500
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any outside Baku
ICMP allow access remotely
ICMP allow any interior-Bct
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
3 overall (RAS) interface
azans access-list NAT 3 (outside-Ganja)
NAT (remote access) 0 access-list sheep-vpn-city
NAT 3 list nat-vpn-internet access (remote access)
NAT (inside-Bct) 0-list of access inside_nat0_outbound
NAT (inside-Bct) 2-nat-ganja access list
NAT (inside-Bct) 1 access list nat
Access-group rdp on interface outside-Ganja
!
Router eigrp 2008
No Auto-resume
neighbor 10.254.17.10 interface outside Baku
neighbor 10.40.50.66 Interior-Bct interface
Network 10.40.50.64 255.255.255.252
Network 10.250.25.0 255.255.255.0
Network 10.254.17.8 255.255.255.248
Network 10.254.17.16 255.255.255.248
redistribute static
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede GANYMEDE +.
AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
key *.
AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
key *.
RADIUS protocol AAA-server TACACS1
AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
key *.
AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
key *.
authentication AAA ssh console LOCAL GANYMEDE
Console to enable AAA authentication RADIUS LOCAL
Console Telnet AAA authentication RADIUS LOCAL
AAA accounting ssh console GANYMEDE
Console Telnet accounting AAA GANYMEDE
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 Interior-Bct
http 192.168.139.0 255.255.255.0 Interior-Bct
http 192.168.0.0 255.255.255.0 Interior-Bct
Survey community SNMP-server host inside-Bct 192.168.1.27
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.10
card crypto mymap 10 transform-set RIGHT
correspondence address card crypto mymap 20 110
card crypto mymap 20 peers set 10.254.17.11
mymap 20 transform-set myset2 crypto card
card crypto mymap interface outside Baku
correspondence address card crypto ganja 10 110
10 ganja crypto map peer set 10.254.17.18
card crypto ganja 10 transform-set RIGHT
card crypto interface outside-Ganja ganja
correspondence address card crypto vpntest 20 110
peer set card crypto vpntest 20 10.250.25.1
newset vpntest 20 transform-set card crypto
card crypto vpntest interface vpnswc
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = gyd - asa .az .bct
sslvpnkeypair key pair
Configure CRL
map of crypto DefaultCertificateMap 10 ca certificatecrypto isakmp identity address
ISAKMP crypto enable vpnswc
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 30
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.0.0 255.255.255.0 Interior-Bct
SSH timeout 35
Console timeout 0
priority queue outside Baku
queue-limit 2046
TX-ring-limit 254
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.168.1.3
SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
SSL-trust ASDM_TrustPoint0 remote access point
WebVPN
turn on remote access
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal group ssl policy
attributes of group ssl policy
banner welcome to SW value
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
group-lock value SSL
WebVPN
value of the SPS URL-list
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the PFS
BCT.AZ value by default-field
ssl VPN-group-strategy
WebVPN
value of the SPS URL-list
IPSec-attributes tunnel-group DefaultL2LGroup
ISAKMP retry threshold 20 keepalive 5
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
IPSec-attributes tunnel-group DefaultWEBVPNGroup
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.10 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.10
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type SSL tunnel-group remote access
attributes global-group-tunnel SSL
ssl address pool
Authentication (remote access) LOCAL servers group
Group Policy - by default-ssl
certificate-use-set-name username
Group-tunnel SSL webvpn-attributes
enable SSL group-alias
Group-url https://85. *. *. * / activate
tunnel-group 10.254.17.18 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.18
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.11 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.11
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type tunnel-group DefaultSWITGroup remote access
attributes global-tunnel-group DefaultSWITGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultSWITGroup
pre-shared key *.
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect the netbios
Review the ip options
class flow_export_cl
flow-export-type of event all the destination 192.168.1.27
class class by default
flow-export-type of event all the destination 192.168.1.27
Policy-map Voicepolicy
class voice
priority
The class data
police release 80000000
!
global service-policy global_policy
service-policy interface outside Baku Voicepolicy
context of prompt hostnameCryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
: end
GYD - asa #.ASA remote:
ASA Version 8.2 (3)
!
ciscoasa hostname
activate the encrypted password of XeY1QWHKPK75Y48j
2KFQnbNIdI.2KYOU encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif inside
security-level 100
IP 192.168.80.14 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 10.254.17.11 255.255.255.248
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
no ip address
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
access-list 110 scope ip allow a whole
192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
management of MTU 1500
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside) 0 access-list sheep
Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.80.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.9
mymap 10 transform-set myset2 crypto card
mymap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPNtunnel-group 10.254.17.9 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.9
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostnameCryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
: end
ciscoasa # $Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas
Would appreciate any help. Thank you in advance...
If the tunnel is up (phase 1), but no traffic passing the best test is the following:
Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.
inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside
The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).
Test on both directions.
Please post the results.
Federico.
-
I have two furniture stores that are run on a windows sbs2012. Recently, both off my all in printers are down in the same week. The first was at the location where the server is actually housed. I bought a HP Officejet 8610 and managed to put in place without problem a lot via a wired network connection. So I decided since who went to buy the same model for my remote which is also connected, but it has a wireless access point. I was not able to get anything to print from my main software called profit systems. I can get things to print to the shared remote drive. I tried uninstalling and reinstalling, but even if connected as long as administrator I get a error that reads "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. I put it up as both just and redirected network and it shows it as ready in the State, but after it clears the queue that nothing prints. I checked firewall settings and all with HP is checked on. I'm pretty computer but I am full of ideas. Help, please!
So after that I lost two days of my time and more than two hours of my time of I.T. guys it came to our attention that the driver IS NOT SUPPORT this model of HP JO 8610 redirected remote office printing! HP really, really? So we have to install the driver 8600 on the server and local computers to get things to print. Problem solved, but it's just sad that this was the problem.
-
ReadyNas remote network of sheet errors
I need help to enter the ReadyNas remote works fine on my laptop. The laptop is a Macbook Pro running Windows 7 Professional x 64 via Bootcamp. Here's what I've done so far:
- I've enabled ReadyNas remote on my ReadyNas and install the application on my laptop according to the instructions here: https://www.readynas.com/?cat=52
- When installation is completed I got the error message: "you probably have a problem with leaf networks network adapter. You can solve this problem... »
- I reinstalled the application and restarted my laptop to make sure that everything was set up correctly
- I made sure that there is no gateway address set according to: http://www.readynas.com/forum/viewtopic.php?f=75&t=42500
- When I try replacing the .dll file that is mentioned in the post above, I get an error and the remote application does not load
- I tried custom - configure the IP address. The custom IP address solves nothing and seems to be reset whenever the application is loaded
- I'll try the manual reinstallation of the network drivers for leaves, but I can't find them anywhere. The link in one of the documents is dead.
- I checked my anti-virus program and added an exception for ReadyNas Remote, just in case.
- I checked all the configuration settings, that I could find associated with the NIC in the sheet. It seems in good health regarding all the but I still make the same mistakes
I'm competent enough to configure adapters and usually solving problems, but I am at a loss on this one. I'd appreciate any help that is up and running!
Hello cbrien,
ReadyNAS Remote on Win10 needs a BETA version. See ReadyNAS Remote BETA for Windows
Kind regards
-
Update video driver to 100 PC in remote network
Video driver needs to be updated about 100 machines on my university network.
Dell Optiplex built with Windows 7.I would like to know if this could be done remotely to save administrators logging in each machine and manually update the driver?Hey Kevin,
I understand that you want to update the drivers for video card for all computers.Like you, your computer is under domain, you need to post your question in the link that should help you below.TechNet forums:
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworkingI hope this helps.Thank you -
Dear community,
First of all, I would like to apologize if this is a stupid topic, but I'm very curious about it.
I wanted to redeploy customers through network. When customers wanted to boot from the network, they got a "PXE - E51: no DHCP or proxyDHCP offers were not received" error. I immediately thought that there is something wrong with the configuration of the switch (our Department of our previous location where it worked perfectly). So I checked the config of the switch.
It was like this:
interface GigabitEthernet0/21
switchport access vlan 500"Shame on me" - I thought. So I just added a line
interface GigabitEthernet0/21
switchport access vlan 500
switchport mode accessAlways without success. So, what should I do? I just opened a search engine and started looking for my problem! There was a support ip topic that discussed this, attempted to implement but no, not of success once again.
So I tried with this one:
interface GigabitEthernet0/21
switchport access vlan 500
switchport mode access
spanning tree portfastYes, it has solved the problem, but I don't know exactly why he sends DHCP offers to customers with this settings? Could someone explain it to me? I tried to find the answer in my CCNA notes but not able to find the information.
When you enable portfast on a port of switch port can start transferring traffic as soon as the client is up and running.
Without portfast port must go through the STP listening and learning steps, and while he does that no traffic can be transmitted.
What is probably happening, is that without active portfast, the client attempts to send his request, but the port is not transmitting. By the time the port began the transfer, that the customer has indeed given up because it's earlier applications did not answer.
Jon
-
Cannot access remote network via VPN
Hello
I'm trying to set up a router vpn access to my office network. The router is connected to the Internet through using pppoe vdsl.
There is also a public oriented Web server in the office which must be accessible.I can access the Web server from the Internet and the vpn connects successfully. I can also ping the LAN Gateway, however, I can't access all the local machines.
I'm quite puzzled as to why it does not work. Please could someone help.
The results of tests and the router configuration are listed below. Please let me know if you need additional information.
Thank you and best regards,
Simon1. routing on the router table
Router #sh ip route
Gateway of last resort is ggg.hhh.125.34 to network 0.0.0.0
xxx.yyy.zzz.0/29 is divided into subnets, subnets 1
C XXX.yyy.zzz.192 is directly connected, Vlan10
GGG.hhh.125.0/32 is divided into subnets, subnets 1
C GGG.HHH.125.34 is directly connected, Dialer0
172.16.0.0/32 is divided into subnets, subnets 1
S 172.16.100.50 [1/0] via mmm.nnn.ppp.sss
S * 0.0.0.0/0 [1/0] via ggg.hhh.125.342. ping PC remotely (172.16.100.50) local GW (172.16.100.1) successful
> ping 172.16.100.1
Ping 172.16.100.1 with 32 bytes of data:
Response to 172.16.100.1: bytes = 32 time = 24ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
Response to 172.16.100.1: bytes = 32 time = 11ms TTL = 2553. ping PC remotely (172.16.100.50) to the local server (172.16.100.10) failure
> ping 172.16.100.10
Ping 172.16.100.10 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.4. ping the router to the successful local server
router #ping 172.16.100.10
Type to abort escape sequence.
Send 5, echoes ICMP 100 bytes to 172.16.100.10, wait time is 2 seconds:
!!!!!
Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms5 see the version
Cisco IOS software, software of C181X (C181X-ADVIPSERVICESK9-M), Version 12.4 (15) T1, VERSION of the SOFTWARE (fc2)
ROM: System Bootstrap, Version 12.3 YH6 (8r), RELEASE SOFTWARE (fc1)
the availability of router is 1 hour, 9 minutes
System image file is "flash: c181x-advipservicesk9 - mz.124 - 15.T1.bin".
Cisco 1812-J (MPC8500) processor (revision 0 x 300) with 118784K / 12288K bytes of memory.
10 FastEthernet interfaces
1 ISDN basic rate interface
Configuration register is 0 x 21026. router Config
AAA authentication login default local
connection of local AAA VPN authentication.
AAA authorization exec default local
local authorization AAA VPN network
!
!
AAA - the id of the joint session
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto ASI_Group
key mykey
DNS aaa.bbb.cccc.ddd
domain mydomain.com
pool VPN_Pool
ACL VPN_ACL
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac TS1
!
crypto dynamic-map 10 DYNMAP
game of transformation-TS1
market arriere-route
!
!
list of authentication of VPN client VPN crypto card
card crypto VPN VPN isakmp authorization list
crypto map VPN client configuration address respond
card crypto 10 VPN ipsec-isakmp dynamic DYNMAP
!
!
!
IP cef
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
username admin privilege 15 password mypassword
Archives
The config log
hidekeys
!
!
!
!
!
interface FastEthernet0
WAN description
no ip address
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
automatic duplex
automatic speed
PPPoE enable global group
PPPoE-client dial-pool-number 1
!
interface FastEthernet2
Description Public_LAN_Interface
switchport access vlan 10
full duplex
Speed 100
!
FastEthernet6 interface
Description Private_LAN_Interface
switchport access vlan 100
full duplex
Speed 100
!
interface Vlan1
no ip address
!
interface Vlan10
Public description
IP address xxx.yyy.zzz.193 255.255.255.248
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
!
interface Vlan100
172.16.100.1 IP address 255.255.255.0
no ip redirection
no ip unreachable
no ip proxy-arp
no ip mroute-cache
!
interface Dialer0
IP unnumbered Vlan10
no ip unreachable
IP mtu 1452
IP virtual-reassembly
encapsulation ppp
no ip mroute-cache
Dialer pool 1
Dialer-Group 1
Authentication callin PPP chap Protocol
PPP chap hostname myhostname
PPP chap password mychappassword
PPP ipcp dns request accept
failure to track PPP ipcp
PPP ipcp address accept
VPN crypto card
!
IP pool local VPN_Pool 172.16.100.50 172.16.100.60
!
!
no ip address of the http server
no ip http secure server
!
VPN_ACL extended IP access list
IP 172.16.100.0 allow 0.0.0.255 any
!
Dialer-list 1 ip protocol allow
not run cdp
!
!Simon,
Basically when you connect through a VPN Client PC routing table is updated automatically as soon as the connection is established. If you do not need to manually add routes. You can check this by doing a "route print" once you are connected.
Ideally, you need to put your pool of VPN on subnet that does not exist on your physical network, the router would be to route traffic between the IP pool and internal subnet.
Now, you said that you have a web server with a public IP address that you need to access through the VPN, that host also as a private IP addresses on the 172.16.100.0? If it isn't then the ACL that I proposed should work. If she only has a public IP then your ACL VPN address must have something like
IP 172.16.100.0 allow 0.0.0.255 192.168.100.0 0.0.0.255
219.xxx.yyy.192 ip 0.0.0.7 permit 192.168.100.0 0.0.0.255
Who says the router and the client to encrypt all traffic between the subnets behind your router and your VPN pool.
I hope this helps.
Luis Raga
Maybe you are looking for
-
HP Inkjet Printer 8615: Fax repair
I have a feeling I know the answer to this already, but I hope I'm wrong. We had some bad time here a couple of days and a wave pulled some items in my house, including an analog phone. The phone line still works normally. Now, I'm testing my prin
-
Photosmart HP 7520: 2 printers appear on devices and printers
I'm not technical so need help to understand why when I look in the control panel under devices and printers 2 printers appear. We're the printer default HP Photosmart 7520 series (network) and the other is HP96DC72 (Hp Photosmart 7520 series). I'v
-
How to save the string in a file with some special characters
Hello I m using MD5 - llb to create a password. So, I want to save this MD5-string to a file and read it later abd compared again. Works perfectly with a proplem: Some Word create a '\r' in the string of MD5 and when I save this string in a file and
-
I can't get the XP computer recognize the Windows 7 network file share more wireless
Problem file/network sharing wireless with a professional system XP and Windows 7 I have 2 computers - 1 with XP and Windows 7 pro upgrade and use a secure wireless network... I have set up my network on the new computer and can see the files on my
-
SHIFT key gives me a pop up close toolbar and screen freezes seconds
When I hit the Caps Lock key, I get a pop up. It comes to the task bar (bottom-right). It's a small black box with 4 options: 1, A, keyboard, mouse. When it arrives I'm locked type for several seconds until what he goes. How can I disable this th