T400 keypad

Similar Questions

• T400 Ultrabay keypad

  Hello, I was just wondering if there was a digital keyboard that can be inserted into the port of utrabay to the t400?

  I find the keypad instead of the very difficult to use letters, and I imagine using a keypad plugged via USB would be pretty boring if I was in public transport.

  I look forward to your reply!

  Hello.

  There was a Ultrabay Plus device carrier that you could insert a device for numpad on ThinkPad models very early, including T23, T30, and some of the A - and R-models as well, but that was a long time ago.

  Your only option, if I'm not wrong, for an additional keypad would be a USB or BlueTooth model.

  See you soon.

• Digital keypad cursor keys no longer work in Firefox

  In any area of text on any web page, and in the address bar, as well as in the search box, the keys on the digital keypad cursor (origin, end, high, low, left, right) no longer work
  NUMLOCK is turned off
  SCROLLLOCK is off
  The regular cursor keys, as well as home, end work etc.all fine
  The numeric keypad keys work fine in other applications (for example, textpad, notepad, word, openoffice, etc.)
  This only affects the navigation in a text box
  I am running windows, and just to make sure, I supported the last windows update and restarted my pc - problem persists
  I tested with another keyboard via USB, the problem persists
  I tried to restart firefox in safe mode, the problem persists

  OS Windows 7 Home Premium SP1, last update is KB2952664
  Firefox 29.0.1

  Found!
  This is the new anti-Keylogger module in my security software (Zonealarm)
  Disabled, now everything is hunky dory AND

• 3 new LCD screen cant log cushion going red circles on the numeric keypad

  Cannot open a session red circles of Ipad 3 password on the keypad. Has replaced the two screens. Worked before replacement of the screens. Wallpaper shows fine but can not open a session.

  < re-titled by host >

  Where did you get the screen replaced? I advise you to take the iPad go back

• Satellite S50 - B12 - the numeric keypad keys do not work

  Problems with the keypad.

  My computer is a B12 S50.
  The problem is the following:
  Keys '.» "3 6 9 *-+ ' keypad do not work.
  Only problem I have with these keys, I have no problem with any other key.
  The keys above the letters are working properly, but I need the pad on the right to work.

  My operating system is Windows 8.1. 64-bit, it's the operating system factory. (I don't have not upgraded to Windows 10)

  Someone knows the solution?

  Thank you all very much.

  Satellite S50 - B12

  

• How to disable the backlight on the keypad for the Qosmio X 70-A-120

  Please, do you know how to disable the backlight on the keypad for the QOSMIO X 70-A-120?

  Concerning

  Open "assist Office > function key" and you will find the option of keyboard backlight. Change in status OFF and t should be disabled.

  Check it out.

• Problem of keypad on thin client

  Hello

  We recently deployed 20 HP customer t5565 light for a customer.

  All employees have a similar problem with the numeric keypad on the keyboard.  By hitting the corresponding key (example 7), the number is not always type in the session terminal server.  The number can only print 2 times for every 3 strikes.

  This problem becomes very frustrating for our clients.

  Can someone please offer some advice on how to fix this?

  The solution has been adjusting the settings within a RDP icon on the server terminal server to use the keyboard "on this computer" option on the basis of local resources.

• Satellite Pro P300 keypad at the same time as the alphabetical keyboard?

  Hello

  I'm new here, and English is not my mother tongue, so be indulgent ;-)

  I have a problem with my keypad.
  It is not possible to make it work at the same time as the alphabetic keyboard.

  When I press NumLock to make it work, there also change the alphabetical keyboard into digital.

  Example: numlock on uiojklnm, = 456123n0,

  I have a QWERTZ keyboard.

  Thanks for your help
  see you soon
  Val

  What model of laptop do you have?
  You update the BIOS?

  If not, try most of the problems can be solved by the BIOS updated!

• Satellite Pro P300 - always 1 is displayed using the numeric keypad

  Hello

  I recently bought a Toshiba Satellite Pro P300, it has been the problem for free for 4 weeks.

  Now, when I try to use the numeric keypad on the keyboard what is displayed on the screen is '1' any number of type i.

  Does anyone know how can I fix?

  Hello

  I think it's a question that should be checked by a Toshiba ASP.
  I googled a bit but and someone has reported that a parameter must be changed to DMI

  I think that this can be done by a technician of ASP.
  Then you should get in touch with the guys and should ask for help and also handling

  See you soon

• Activation of keypad on the Satellite Pro P100

  I just got my laptop new Satellite pro P100 and cannot find how to set the number pad (integrated) to be enabled at power on.
  I checked in the Setup, the Toshiba HW setup... nothing

  Does anyone have an idea?

  Thanking you in advance

  Please correct me if I'm wrong, but there is no sense for me to have 'num-lock' enabled at startup on all laptops.
  As you know, all the keys the keypad uses are shared with the regular alpha keys. In order to avoid interpretation of the wrong password (on a reduced keyboard set), the "Numlock at startup" function has not been implemented in most (all?) notebook BIOS.

  You can hold the key while you tap on the "blue pad", but that's all you can get without activate "num lock" with the +.

  If you have an attached external keyboard, very probably the num-lock on the extra cushion will be "on" by default. Otherwise, if you do a lot of the use of the numbers, you can get a num - pad usb to your laptop. There are quite expensive "toshiba-made" on e - bay ;)

  Concerning

  chain

• Is it safe to use keyboard if I put the microfibre cloth on top of the keypad cover when I close the mac? (mac pro retina display)

  Hi all.

  I use Kuzy keyboard cover on my mac pro retina display.

  I read that Apple does not recommend to use the keypad cover when you close the mac of retina display.

  So I wonder if it would be dangerous to use key cover if I put the microfibre cloth on top of the keypad cover when I close the mac?

  In this way, would the retina display not scratched by a keyboard cover?

  Please share an idea about it, thank you.

  It is not only the possibility of a scratch, but also that the MacBook Pro retina are very thin. Adding a keyboard cover and a cloth could lead to damage and it closes does not correctly. I have personally not use either on my rMBP.

  To activate the thin design of MacBook Pro with computers of Retina display, the distance between the screen and the top box is designed to close tolerances. Do not use palm rest covers or covers of CAP, because the extra thickness can interfere with the closing designed screen position.

• Keypad

  How to make a call without a keypad?

  And be smart and tell to use my keyboard.

  Why the dial pad has been removed?

  And why the message says "calls mobile and fixed to the dial pad" when he isn't here?

  The dial pad is still available, but you must make the call window wider in order the dial pad is visible.

  http://community.Skype.com/T5/Windows-archive/dial-pad-not-active/m-p/697489#M161490

• Satellite L675: characters show twice and delay keypad when typing

  For some reason, there always seem to be a delay seconds on the keys of the keyboard, including the numeric keypad. Several times, has been ignored, a character or the character appeared twice.
  Vey frustrasting that I always come back to add or delete a character.

  When I run a program of word in safe mode, it works fine. Someone told me that it may be a software problem that the problem does not occur in safe mode.
  I'm very careful with the laptop that I don't know that there is no release.

  Any feedback is greatly appreciated.

  Thank you.

  Hello

  Try a BIOS update.
  I read here in the forum that this solves the problem of keyboard similar to yours.

  Welcome them

• Satellite L20E - external numeric keypad USB problem

  Hello

  I have problem with my Satellite L20E - when I connect external USB numpad, it interferes with the keyboard of the computer.
  I would like to work independentaly (i.e. ' J' on my regular keyboard as a 'J' and '1' on my keypad external as '1'), but when I turn the keypad numlock, it also enables the numeric keypad of the keyboard regular (i.e. when I press the 'J', it returns the value '1') - on my previous Satellite 1410-903, this has worked.
  This bug really bothers me, because I need to enter large amounts of numbers.

  Thanks for any advice.

  Hello

  Believe it s not a little money. Please try to activate the function with the FN + F11 key combination. This function turns on and the small gray signs to your keyboard. Well, also check the function FN + F10

  Please also check the chapter 5 of the user manual. You will find lots of information on the keyboard

• Envy 17 t-n100: some keys on the numeric keypad does not

  For a few months now, I could not use the /, *,-. 4, 5, 6,., or 0 keys on the numeric keypad. All other keys on the laptop works. I did a few driver updates since then for the keyboard. Sometimes after that several several presses the keys work briefly, then shut down again after a few minutes. In my view, it could be a software problem, I became unable to use the keys on the right after the installation of the application to the emulator Android of Nox.

  Solution

  For me, uninstall the Nox App Player solved the problem immediately. If someone has a similar question on any laptop model and has installed Nox, but didn't need it, I would try that