T400 problem booting from the hard disk, blinking cursor on the top left corner of the screen

Similar Questions

• Satellite L500 - 'Boot from a hard disk BBS' shown at startup

  I have a Satellite L500, when to start it comes up with 'boot from a hard drive BBS' and that's where he stays. I tried to change the sequence of boot and startup speed.

  Could this be related material or the recovery disc won't work?
  Any ideas I can try?

  The value of the default BIOS and try again.

  By the way: since when you noticed this message?
  Did you change that may be responsible for this?

• When I turn on my computer all that happens is I get a message on the top left corner of my screen saying NTLDR is missing. (what is NTLDR)

  When I turn on my computer everything that happens is that I get a message on the upper left corner saying THAT NTLDR is missing, press control, alt, Delet to restart

  Hi maryo'carroll.

  · What is the full error message that you receive?

  · Do you remember all the recent changes on the computer before the show?

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  You can check the links below: year NTLDR or NTDETECT.COM not found error: http://support.microsoft.com/kb/555304

  Windows may not start and you may receive an error message "NTLDR is missing" If Windows is not up-to-date and there are too many files in the root folder: http://support.microsoft.com/kb/320397

  With regard to:

  Samhrutha G S - Microsoft technical support.

• HP Pavilion 500-210 QE cannot boot from any hard drive.

  Good evening. As you can see on the subject, my computer just cannot boot from any hard disk that I put on it. I tried swapping the power supply, SATA cable, reset the BIOS, allowing the start legacy, changing to AHCI to IDE and RAID...

  When I get to the BIOS Setup, I see the hard drive and its features, but it will not start or show when I am trying to install a new OS. I'm not an expert, but I think that the problem could be in the motherboard SATA ports, but I'm not sure. Just to be sure, I tried another harddrive and it did not work as well.

  I was also thinking to buy a HDD external and installation of my OS on it, but I don't even know if it is possible and I would really like to have my computer working again.

  Thank you for your attention!

  Ok. That doesn't say that it is very likely that the motherboard has problems.

  Contact HP for warranty repair.

• Not possible to boot from the CD after installing Win XP on Tecra A3

  Hi all

  I can't boot from the CD more? I tried following things:
  -J' used several CDs to boot from, such as Windows XP, other CD CD WinXP or UBCD (ultimate Boot CD) and others to boot from.
  -J' chose in the start menu and the Bios first, the CD player must be started from.
  -Disabled the HARD, the LAN and the FDD drive so that only the CD must be started from, nothing else.
  -Press F12 after start-up und selected CD to boot from.
  -removed the battery
  -removed the disk drive HARD that the CD is only peripheral to start.
  -No available recovery disk.
  * Result: Always at top left corner a cursor flashing on a black ecran.*

  My story to this problem/question.
  -J' reinstalled Windows XP after the system became slow, with SP2 and SP3.
  -During the installation of SP3 and at the same time other pilot the system crashed.
  -Pressing F8 after starting, I can choose the Options to win.
  -System running days, several days without any reaction.
  -Sometimes, it goes into "secure mode" and freezes, no entry or possible reaction.

  I want to install Windows XP again from the CD and a clean version to work on.
  That means no two were leaving to work on alone.

  Can someone tell me why the CD player is with any media ignored inside and no departure from them is possible?

  Thanks for your help

  A strange question what s
  I put t know, but you did an update of the BIOS? Try it!

  Moreover, what laptop Tecra A do you have?

• Reinstall vista again HARD drive now PC don't can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop

  Duplicate info wire - running kill disk, vista disappeared and my laptop does not see my dvd/cd drive and I can't reinstall vista OS because of this problem

  Have to reinstall vista on a new HARD drive now PC can not boot from the DVD drive I can copy vista external hard disk drive, and then install on the laptop?

  The DVD player worked before HARD drive went bad now, it won't work.

  And I just replaced the HARD drive, but now cannot load an operating system that he...

  Help, please...

  Hi dynamitenews

   

  1. are you able to boot to the desktop?
  2. what happens when you try to start the computer?

   

  You must have the DVD drive to start the computer using the disk, you cannot use the external hard drive to do the same thing.

  Also I suggest you to make sure you have defined the start as CD/DVD-Rom as the first choice option in the BIOS. See below the help link-
  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  If nothing is done, then you can contact the manufacturer support for assistance on setting up the correct boot sequence and check.
  
  BIOS WARNING-
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  I hope this helps.

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• boot from the disk HARD second 4540 probook s

  Hello

  I replaced the optical drive with a second HDD on 4540 ProBook s. I read of this 2nd HARD drive but I could not configure BIOS to boot from it, and boot device options lists only the first HARD drive.

  It's pretty common. Simply because the BIOS is written to boot from an optical drive connected to this port does not mean that he will start on a hard drive. I don't think there's any way to boot from the hard drive adapter in the optical Bay.

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• Satellite M40 - cannot boot from the recovery cd after format HARD drive

  Hello

  After my Satellite M40 - 133 being affected by the virus of security internet I had to wipe my hard drive. The virus wouldn't let me do anything, boot without failure or system restore. I wiped the disk and it still wouldn't load up. That's why I had to do a full erase of the disk including the hidden partition.

  After doing his now do not let my boot from the CD of restoration as it says invalid partition as his search for files that must be on the hidden partition. What can I do to get it started. I'm not bothered about to recover anything on the disc. If I remove the hard drive and put the recovery cd in, it excludes the disc and begins to start until he fails to see the hard drive.

  Outwardly I can link the drive to another pc and he sees it as a storage device so I'm glad that there is nothing wrong with the hard ware - help please

  Hello

  Can you see the HARD drive with all the details in the BIOS?
  If this isn't the case, then this means that the HARD drive is faulty or not fully compatible.
  If you can see the HARD drive in the BIOS, then this means that the HARD drive is compatible.

  But this should not affect booting from a bootable CD.
  Even if the HD would not be recognized in the BIOS, you should be able to boot from the CD. For example a live Linux CD has not only any disk HARD because the BONE would not be installed on the HARD drive, but it loads into RAM.

  The question is; Why you are unable to boot from any CD?
  Maybe the discs are scratched or the CD/DVD drive cannot read the disc more because of problems of laser lens
  If possible, try to copy/burn the Windows CD using another computer, and then try to start using the copied disc.

• Z575 will not boot from the hard drive or restore DVD

  Need help on a laptop Z575 age of 2 years that immediately after an automatic update of windows, will not start either from the hard disk or restore DVDs (blue screen). Does not start in safe mode, not booting from a rescue of third party DVD. Attempt to start, it will show you the ability to start the Startup Repair tool. Repair shows that it is unable to fix with the detail following problem error messages:
  Signature of the problem 1: 6.1.7600.16385
  Signature of problem 2: 6.1.7600.16385
  Signature of the problem 3: unknown
  Signature of the 4:21200196 problem
  Signature problem 5: auto failover
  Signature of the problem 6:7
  Signature of the 7 problem: bad driver
  OS version: 6.1.7601.2.1.0.256.1

  Normally think that the hard drive has failed or that windows update caused a software problem, but the inability to boot from any restore disk that makes me think that there is another serious problem with the hardware of the laptop.

  Any help would be appreciated. THX

  Additional note: when you try to boot from a restore disc, blue screen, error message:
  Stop: 0x0000007B (0xF78DA640, 0xC0000034, 0x00000000, 0x00000000)
  It is a hardware failure that cannot be restarted soft.

  I also removed the hard drive and RAM, reinstalled and rebooted, no change.

  Additional note: I was able to access the hard drive with a recovery of old program, focused on the (SpaceFM) ram charged through the DVD player. Hard drive data appears intact. Still does not start from the hard disk or a DVD of windows system.

  Thank you. Rather than buying a 4 GB or more large key USB comes from put this into hard drive replacement. Installed correctly, boots very well now. No other error of the optical drive... and no explanation I can see, but that's it.

  Unless something else pops up we'll just call cela a HARD drive failed after 2 years of common use. Thanks again.

• Serious teething problems (problems of ubuntu-windows, hard disk problems boot loader)

  I have a laptop ASUS K50IN with recovery partition windows preinstalled on the hard disk (Windows 7, Home Premium edition, 64 - bit).

  I formatted the entire hard drive with Lubuntu installation dvd, I used Lubuntu, for a few weeks with success.
  (I used a removable drive for installation.)
  After that, I wanted to do a dual-boot system (windows-ubuntu).
  I deleted the windows install Summary Lubuntu with recovery partition, so I downloaded a version of Windows 7 Home Premium 64 - bit and burned to dvd (I have my product key from the back of the machine). Downloaded from: msft.digitalrivercontent.net.
  I deleted the partitions lubuntu until windows install with windows dvd, made a partition for windows (with the 100 MB system reserved required),
  and began the installation process which took place successfully, but it failed to restart after the installation. As much as I remember came problems.
  I had a few bad boots, but I managed to run the new windows 7, made some configurations, programs installed on it. I always have problems with reboots. (It was stable when I have manged to get into windows itself.)
  I searched the net and found that ubuntu uses grab as boot loader, and it isn't getting deleted with the simple formatting even with a windows installation.
  I tried to repair the boot loader of windows to the Master Boot Record by running the command from the windows installation disk prompt (many tries to start).
  I tried these commands unsuccessfully:
  /fixmbr Bootrec.exe,
  /FixBoot Bootrec.exe,
  /RebuildBcd Bootrec.exe,

  (by the way these commands responded succession of repair)

  Bootsect/nt60 SYS/MBR,
  list not found no operating system compatible hits.

  (Auto repair could not fix problem.)

  Then I used DBAN to completely wipe my drive.
  I used the values in interactive mode (PRNG:mersenne twister, method: DoD short, collar to check: last).
  Ran for 9 hours, crushed 3 times, has completed successfully without errors.
  I read that it removes the MBR sector too.
  I tried to start the windows installation disc, and it shut my computer when it arrives at the end of the second bar with "WINDOWS IS LOADING of FILES.
  Same problem with the installation of ubuntu dvd.

  Same problem with the DBAN disk.

  Same problem when booting from the hard drive.

  Keeps turning itself off in unpredictable ways. Sometimes, I managed to get in installation disc menus, then comes the turn off.

  Above all it stops early in the boot process.

  Hello fatou,.

  Thank you for giving us the opportunity to help you. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem.

  As you have tried almost all the troubleshooting steps, and if the problem persists always try to follow the provided suggestion in the following documentation of Ubuntu and see if it helps.

  WindowsDualBoot .

  You can also consult the steps described in the following Microsoft article and see if it helps.

  Install multiple operating systems

  If the problem persists, I ask come you into contact with the your computer manufacturer (ASUS().

  Keep us updated on the issue and we will be happy to help you if necessary.

  Kind regards.

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Need help please, bios sees the new hard drive but still cant boot from the cd-rom

  HI there, Im having some problems here. First of all, I have a Dell Dimension XPS Gen 2 with BIOS A06. I replaced the original hard drive to 120 GB because I received a stop error code with a new 320 GB (000000 x 24 or somethinglike that) but after research I was convinced it was the reader. I installed the new drive and the BIOS sees it under drive as primary drive SATA configuration... It's good, I guess, but now when I go to the sequence of hard drive I get (1. Unknown device (not installed) 2. System BIOS 3 boot devices. (Not installed) USB device) why the drive is not displayed here?

  OK, so now when I try to boot from a CD-rom Home XP I get "strike F1 to retry boot, F2 for Setup utility. I can't seem to get around this problem any time now. I can get it to boot from a floppy disk, but not the CD, why is this? The two CD-ROMs are appearing in the BIOS as second master and slaves. IM really stumped on this one, please help!

  Message edited by jaygen on 18/03/2008 20:22
  
  

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.