T400s camera stopped working after about 2 weeks

Similar Questions

• my computer screen stops working after about 30 minutes. Computer is not affected. What is the possible problem?

  Monitor turns off after about 30 minutes. Green light stays on. Computer keep going tom exploit.

  Must turn off monitor for several minutes before you post again. What is the possible problem?

  Maybe this article would provide a few ideas:

  Adjust Windows XP Power Options
  http://www.lancelhoff.com/adjust-Windows-XP-power-options/

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Arc keyboard stops working after a few minutes of inactivity

  The arc keyboard stops working after about 10-30 min to be idle. I can unplug/plug usb receiver or take out / replace batteries and still doesn't work. I have to restart the computer to make it work again. Any ideas?

  Thank you

  Hello

  Please update us with this information.

  I suggest you to update your computer with the latest version of the Microsoft IntelliType Pro for your keyboard and check if that helps.

  Keyboard Microsoft IntelliType Pro 8.2 for Windows - 32 bit software

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26949

  Keyboard Microsoft IntelliType Pro 8.2 for Windows - 64 bit software

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26950

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• VAIO Motion Eye Camera stop working

  Laptop: VGN-SR190E
  Problem: USB Motion Eye Camera stop working
  OS: Vista Edition Home Premium

  The Sony Visual Communication Camera died in this laptop. I want to talk about the "Motion Eye" webcam above the screen.

  In the Arcsoft window, frame (window of the camera) went black, screen resolution went to 176 x 144 (QCIF), whatever that means.
  In addition, no image using Windows Live Messenger.

  Worked very well (image capture), then quit. Removed and reinstalled the drivers. No help. In the properties of the device, he says: "this device works correctly. Well maybe, but no picture.

  What else can I do to fix this?

  I can't stand Vista another day. I ordered Windows 7. I hope that its an improvement. Could install Windows 7 remedy? I guess I'll find out.

  Any ideas would be appreciated.

  Thank you
  Phil

  Update: not working yet.

  Error message in Arcsoft WebCam Companion:
  'Webcam not found or does not work properly. Please click the Connect button and try again.

  Previous post:
  No help from this Forum, but I got the Motion Eye Cam working again. He would sometimes work for a minute or two and then quit. I thought it would be connected USB so I downloaded the registry USB patch (and a whole bunch of other updates and more) and installed it. After the patch USB Webcam has started working again. I don't know if it was the fix, but its working now. The Vaio "Updater" program did not work (it should be updated as well) so I had no idea there were so much software upgrades available for this laptop. I highly suggest that you check the Sony Web site for downloads (if you did not) available for your computer. Good luck.

• Helmet of Q10 Blackberry blackBerry 10A stopped working after update 10.3. Help, please

  Dear friends! I bought a new Blackberry Q10 just a return of the week and it was on 10.2 os and worked very well, he made me a 10.3.1.1779 update which was about 1.5 GB and I opted for it. My headphone stopped working after the successful update. Besides that everything works well and good. I tried another helmet, cord to the and also tried to wipe off security and hard reset, but nothing helped. I am very worried and looking for help. Please guide me what should I do? Either it's a hardware problem or software related? PS each time as I use headphones it detects, by pressing the button answer on phone headset also Assistant bb opens but sound is not dating a helmet! What ahould do? My phone does not come in the warranty.

  Try different helmet "well known." If those who still fail in your device (but work well in another device), then the deduction becomes one of the devices, which of course we cannot do something internet remotely. Since you say that you have no warranty, you are then looking for a local store (to you) with a technician that you trust and ask them to go to a good assessment and estimate.

  Good luck!

• Speakers stopped working after changing the device sound card

  * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

  I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

  Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

  My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

  It is a question of another driver, or is it something else?

  Any help would be greatly appreciated.

  Are plug you the speakers into the modem?

  They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
  Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
  See you soon,.
  Jerry

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• Acer w3-810: heating problem & touch stops working after a while.

  1 year warranty, 810, Acer w3 expired, the Tablet is showing heating questions now, close the camera back and after a while to the touch stops working, touch works fine on reboot and compressed is cold. When the Tablet is connected to a network to the touch stopped working earlier than when not connected.

  to solve this problem:-J' I reset the windows. which increased the length of time in which the touch works but always to the touch stops working after a while.

  I disassembled the Tablet and found that the part that is overheating is memory [h9tknnnbpdma].

  What shoul I do, what I need to change the digitizer, software or any better solution?

  resolved:

  the problem was solved when I disconnected the cables of the digitizer and then reconnected.

• Image fails after about 1 week to install

  We have a problem where our Windows 8.1 image not settled after about 1 week.  We can cut out an image with ImageAssist and it works fine.  We install and test it on several models with no problems.  After about 1 week it start to fail with a blue screen, screens black, or is totally insensitive after the image is applied and the system is restarted.

  Note:

  We are able to create a stable image that lasts longer than a week, but we don't know why some work and others fail.  It's very frustrating and adds an additional week to our process which we do not like.

  Someone has seen this before, or someone has a solution?

  Image office
  Windows 8.1 fully patched
  VMware Workstation 11 & 12
  UEFI enabled for the virtual computer
  Reference Dell 9020
  Dual SSD in RAID 0
  32 GB OF RAM
  Reference Dell Image Assist 4.0.0.8 (we used previous versions of the same question)

  KentImager - thank you very much for the information.

  We saw only one instance reported of the symptom that you are experiencing.  It is resolved by the resolution referred to in this message 'restoration of images 64-bit issues'.  If your W8.1 image is 64-bit, and your USB has not created with the /secureboot switch, maybe that's the problem.

  As an aside, in our next version of ImageAssist - the process of creation of USB drive is no longer produced a 32-bit version by default, instead it will automatically create the corresponding version of the operating system detected at the time of production.

  Thank you

  Tyler

• Audio stopped working after update

  I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM.  The audio has stopped working after a few updates.  Don't know which because he has many people who installed at the same time.

  I tried to uninstall the audio driver then reinstall.  I tried the shooters to boredom.

  In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10).    When I start the computer, I get a message that does not start the Realtek audio.

  Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again.  Thank you.

  Hello

  Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-no-sound-high-definition-audio-device/99f19403-c7f3-462e-9ff8-b36f260be979

  You can also check:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/ATI-high-definition-audio-device-has-a-driver/cd913a6c-40Cf-43c8-8073-fb865b4020d7

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Keyboard and mouse either fail to start or stops working after a while.

  Original title: keyboard and mouse problem

  My keyboard and mouse either do not work at startup, stop working after awhile, sometimes after a few hours or sometimers causing me to push the button Reset to get out every 10 minutes is on the line of support from microsoft for two hours, cost me £65, but still not fixed

  Pentium I5 dual core 2 x 500 GB disks 5700 chart logitec gaming mouse and keyboard

  Hello

  Thanks for those tips, I've considered that everything that had happened in the last weeks and remembered that my mouse was the first to show signs of problems when the red light on the bottom went dark and brilliant then a few times.

  I swapped the front mouse with a type Wireless and it seems not however solve the problem since replacing it with a different mouse to lead the problem disappeared. In my view, that the old mouse has a hardware problem that shorted supplies USB causing both mouse and keyboard stop working.

  allowed for a few days, so I guess that was the problem.

  Thank you for your support

  Chris

• Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image

  Since I loaded items 14 in my computer, the program stops working after having worked on the images and I try to save the processed images. This happens over and over again and I am very angry that this continues to happen. After working on an image for 15-30 minutes I lose everything I did when the program stops working... This is extremely frustrating, as I can't use the program

  Hello... Adobe, you have a phone number I can call to talk about this?

  Why don't answer you my survey?

• Audio stops playing after about 30 seconds, the continuous video

  I created a movie with music.  During the preview, the video and the audio works fine.  The problem is when I watch the video on my pc, the sound stops playing after about 30 seconds and the video continues.  When I reset to that point the audio begins again, then stops shortly after and the video still continues.  It is a mpeg format and played on the windows media player 11.  What is the problem with the audio?  Looking for solutions to this problem.

  Thanks people for your suggestions and advice.  I had the sound to play.  I did change the audio settings for dolby to mpeg and that makes the difference.

• Anyone Bitmoji keyboard stop working after updating iOs 10?

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  jerseryjones4 wrote:

  Anyone Bitmoji keyboard stop working after updating iOs 10?

  Someone posted on another thread a tweet from Bitmoji they are currently declining, but working on the issue.