T410 - cannot connect to internet (wireless)
Hello world
I have a new Lenovo T410 (used). In the first 2/3 weeks, everything was fine. The computer was installing updates whenever I turned it on, however, any problem. However last week I'm more available to connect to the internet through wireless connections. The button on the right side of the computer is turned on, but on the dial-up connections, the message is this: '' no wireless adapters found'. I have an another Lenovo (T450) and I can access the internet via my wireless network.
Please find below links to 2 images describing the problem. Anyone know how to solve the problem?
http://ImageShack.com/a/img924/7915/efI2tj.PNG
http://ImageShack.com/a/img921/5382/aSMiPY.PNG
Thanks in advance.
Hello, mgomes021
On your laptop network card drivers do not work correctly a reason any, or wired Ethernet or the wireless. It is the main cause of the connection problem. I guess an other laptop drivers needs are not installed.
Launch application ThinkVantage System Update on the support site, it will find the drivers and updates for your laptop, let application to download and install those at least critically.
Tags: ThinkPad Notebooks
Similar Questions
-
Wireless network adapter cannot connect to the wireless network
When I start my PC HP TouchSmart it does not recognize my wireless network. It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer. It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network. Any help?
Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.
Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
Troubleshoot network adapter problems to Microsoft link above.
Try without commitment TCP/IPv6:
If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)
http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/
See you soon.
Mick Murphy - Microsoft partner
-
A Wi - Fi connection does not have an IP address and cannot connect to Internet
Here's my question:
"Wi - Fi doesn't have an IP address and cannot connect to Internet"
But he connects. I use the model of airport Time Capsule ME182LL/A and the last OS.
The reason why I suspect the problem is that my Samsung smart TV will not connect to internet, but connects to the WiFi.
Do I have a problem when the network preferences indicates my network with a point orange and says 'No IP Address'? It doesn't have a green dot next to the Wi - Fi connection and it says connected. I'm puzzled.
Thanks for any idea that you can provide.
Something wrong with the Setup program.
After the airport utility screenshots of the configuration of TC.
In particular this modem do you have? Actual spending brand and model please.
Who is your ISP?
-
Satellite P750 - cannot connect to my wireless router.
My laptop cannot connect to my wireless router.
I tried to connect with the other laptop and it works.Help me
Recommend to read some threads here in the forum "Wireless issue" of Toshiba.
There is a lot of discussion on WiFi problems and how to solve this problem. -
I have a SBS 2011 and cannot connect to internet through VERIZON FIOS.
I have a SBS 2011 and cannot connect to internet through VERIZON FIOS. The SBS is unable to detect the IP address and gave an error message. I never get to a screen that allows me to type in the "IP address of the router" or "IP address". Verizon told me that their router address is "192.168.1.1". After a new trial, I added my NETGEAR FS105 switch between the FIOS router and my PC 2 and SBS. Result - conflict of addresses of servers.
Any suggestions or solutions to this problem?Thank you
ChuckHi Chuck
Your question is addressed in the Microsoft Answers forums.
Please ask your question in the following forum.
Small Business Server Forum:
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Concerning
-
My HP Pavilion dv9720Ous laptop cannot connect to internet
I installed a new Buffalo-G-CBOA router for home. My HP Pavilion dv9720Ous laptop connects to the router, but the HP laptop cannot connect to internet. Is there something that needs happeon on the PC to connect to the internet? Thank you
How are you communicating on this forum?
I suppose that from another PC, correct?
Download you the driver on the PC that you are using, and you glitches the file on a CD, or copy on a USB key.
You transfer the driver file that you copied to a flash drive or a CD into the computer that needs the update of the driver, then run.
-
Adobe cannot connect to Internet
Adobe cannot connect to Internet, but Internet works well. I have Adobe CS6 Master Collection for Windows. I tried everything... ALL without any result. Please help me.
Please see:
'Please connect to the Internet to continue' error keeps popping up.
Error: "could not connect to the server.
I hope this helps.
Concerning
Megha Rawat
-
Cannot connect Bluray Internet
Shows the signal from the router but cannot connect
Hello Ellen,.
Welcome to the community of Sony.
Check in the manual of the player, if the LAN USB UWA-BR100 card is needed to connect the player to the wireless network.
You can download the manual here.
Test the speed of the Internet being used from the link below.
http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1013044
Internet connection speed minimum of 2.5 Mbps or greater is required for streaming of videos from standard definition (SD) and 10 Mbps or higher is required for high definition (HD) videos.
Follow the steps mentioned below to resolve this issue.
http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1018338
If the problem persists, perform the steps on the below knowledge base article to configure the network manually.
http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1025439
If my post answered your question, please mark it as an "accepted Solution".
-
Printer cannot connect to Internet
I need a claim code. To achieve this, I need to access ePrint of my Control Panel on my printer HP model 3512. Unfortunately, I like "Printer cannot connect to the Internet." Can someone help me understand this and correct the problem? Thanks in advance... M
You don't need a code of request to connect to the internet. Your printer has wifi support? Connect the printer to your router wireless first, then you can access ePrint.
-
Unable to connect to Internet wireless using the Galaxy Samsung SGH-I717 note.
Original title: network
Yes, I have all the products from Samsung, has everything to the computer screen one touch, a multifunction printer and a score of Galaxy (I717 GHS). My wireless network is with Dish Network. The computer and the printer works fine, but I cannot access my network wireless via my smartphone. I saw the control panel to display all installed devices but my wireless router is not displayed. When I try to access my network on my phone asking me to enter a password. When I type the router 8-digit number it says it is incorrect. What should I do?
Hi Richard,
Thanks for posting your question in the Microsoft Community.
I would really appreciate if you could answer the following questions:
1. what operating system is installed on your computer?
Operating system Windows am I running?
2. are you able to connect to the Internet wireless with another network?
I suggest you to contact Samsung support to learn more.
Contact Samsung Support:
http://www.Samsung.com/us/support/contact
http://www.Samsung.com/us/support/
If you need further assistance on this topic, let know us and we will be happy to help you.
-
I have a HP ZV5000 laptop, who has recently suffered a hard drive crash. I replaced the drive reinstalled the operating system and it is running Windows XP Home Professional with Service Pack 3 installed.
When you attempt to connect to a wireless network, it finds all those that are generally available, but won't connect.
The properties indicates that the laptop uses "Broadcom 802. "11b / g WLAN. (Broadcom website isn't much help. The site seems to be mostly press releases).
I am told that it worked (I can't confirm this, as the player crashed when I got it).
Any suggestions? If there is any other information necessary to solve this, please let me know and I'll be more than happy to provide.
Thanks in advance!
How do you reinstall Windows?
If you use a Microsoft Windows XP installation CD, you must install all of the drivers as well. If you have reinstalled using any method HP supplies to 'restore factory State' you will have already installed the drivers.
If you can get to the Internet by connecting to the laptop using an Ethernet cable, you can go HERE and click the button "Scan Now" to make sure that you have all the correct drivers.
However, because you can see the available wireless networks, it seems that you have at least a certain driver installed for your wireless network card.
The usual reason that a wireless adapter cannot acquire a network address is the router's security settings are not allowing the connection.
The best way to deal with misconfigured security settings is to remove the 'profile' currently registered and try to connect again.
Open network connections (start > run > ncpa.cpl > OK)
Right-click on the icon for your wireless adapter and select Properties
Click the Wireless Networks (see screenshot)
If the "Use Windows to configure my wireless network" box is NOT checked, you use a third-party utility to configure the adapter and need to read its User Guide to determine how to remove the 'profile' to connect to your router.
Assuming that the box is checked, find SSID (network name) router in the list of "Preferred networks" and click 'delete '.
OK your way out
Find your network in the list of available networks, and then click 'connect '. Make sure you enter the password correctly.If this does not work, the next step would be to connect to the router by an Ethernet cable, temporarily remove all security settings that are configured on the router, remove the "My network places" configuration as above and try to connect again.
If you need help to get to and the configuration of the router, please provide the make, model and hardware version, as appropriate (check the label).
-
Cannot connect ot my wireless network after you run Setup WRE54G
I bought a camera (ver. 3 - en) WRE54G refurbished. Just before the installation, I was able to connect to my wireless network, internet access, etc.
So I ran the installer for the WRE54G to my laptop, which failed because the installation program could not connect to the diving (device was plugged).
After this attempt, I am still able to connect to my wireless network at home with my laptop, however, I cannot access the internet.
Other computers (macBook, my Galaxy Tablet) have no problem with the wireless network, only the laptop that ran the Setup program.
I restarted the wireless router and my laptop several times. I then unplugged the WRE54G - no difference, Iam not able to access the internet.
Can you please help?
THX
Never mind. For some reason any annihilated configuring the default gateway setting - so no DHCP, DNS server.
-
Cannot connect to internet after auto update under Vista.
Original title: System shows the connection, but cannot connect
Hi dozerman5676,
-You receive an error message/code when you try to connect to the internet?
Follow the steps below:
Method 1:
Access the link below and follow the troubleshooting steps mentioned in the article for a possible solution:
The problems of Internet connection
Method 2: Reset Internet Protocol (TCP/IP)
To resolve this issue automatically, click the fix this problem link. Then click run in the file download dialog box and follow the steps.
See How to reset the Internet Protocol (TCP/IP)
Gokul - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
PC cannot connect to the wireless network
Windows Vista and office computer HP. The use of the Airport Extreme.
All other computers in the House can connect to the wireless network.
The Vista machine declined the connection Wireless intermittently for the past two weeks. Tonight, he lost it completely. When I click on "connect to network" in the network control panel - I see the wireless network. But when I click on connect, I get a message that Windows cannot connect to this network.
I changed the password on the Airport Extreme and rebooted, it. Wireless usb on Windows machine the device works correctly, by checking through the properties box.
For example, Vista machine is recognizing the wireless network, but does not connect. Why not?
I'm ready to throw the computer out the window!
Hello
Check the PoodlesAway solution to the same issue here:
======================================
Apple Airport may be your main problem - did you check its firmware?
http://reviews.CNET.com/8301-13727_7-10331876-263.html
======================================
Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows 7 cannot connect to internet Bootcamp
Hi all! Now, I know that there have been many discussions going around all sorts of places on this issue, but the sad part is that I could not well answer truly adapted to my situation. So first off, I got my windows 7 with bootcamp on my macbook 13' pro a week ago and the internet worked perfectly well. But I had problems putting games on the windows section, so I removed the partition and re-bootcamped windows 7 once again. This time, my game worked perfectly, but now internet cannot connect at all. The only difference between the different times that I partitioned the laptop, this is the second time that I actually put the OS disk in because the first time I forgot. If all the drivers and others have been installed at the second time around.
When I try to connect to the internet and troubleshooting it said only that "wireless isn't a valid IP configuration" I do not completely understand. And the funny thing is that I have about 3 other computers using the same router everything on windows 7 with absolutely no problem. I tried rebooting the machine and the router, enter the network name and password manually, refresh and reversing the network card and a few other unnecessary things. However, I don't have a Hello on my computer and I don't know if I really needed, because it seems like that was a problem.
Sorry for the words really not technical, but I am not that computer savvy, especially with regard to such things. I'd appreciate any help, thank you in advance!
You have installed the Windows drivers instead of Apple's Boot Camp drivers. Start with step 18:
MS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
Satellite A200 - Question on the reference numbers
I have a Satellite A200-221 (PSAE3E) motherboard is faulty. I sent him the public support of Toshiba and they confirmed that the motherboard is faulty and I had to buy a new one. It was too expensive, so I don't let them fix my laptop. Now, I've seen
-
Good evening everyone, I recently had my 8.1 Windows reinstalled on my laptop through a 3rd party shop. As you know they wipe everything what there including programs initially on the laptop to buy. I wasn't ready to pay the price, they cited for all
-
What happens if I run out of DHCP?
If all 254 IP (192.168.1.1) addresses are given on my network, it will cease to distribute IP addresses - or - he will begin to distribute 192.168.2.1 and continue)?
-
Cannot install Visual C++ Redistributable for Visual Studio 2015
Hello I recently installed a game (Grim Dawn) and when I try to run it, I get this message: "The program can't start because MSVCP140.dll is missing on your computer. Try reinstalling the program to fix this problem. » After some research, looks like
-
BlackBerry Smartphones help please... Yahoo Messenger!
Hey guys... I need help here... recently some people send me msg on my YM... and it turns out they are viruses... we know all that the virus spread to other YM users... so no solution for this problem? must I download new software YM? If Yes, where?